"
Advancing
the Hall-Héroult Electrolytic Process" (
Overview),
B.J. Welch, August 2000.
"Aluminum
Fabrication and Applications" (Overview), E.L. Rooy,
August 2000.
"Aluminum
Solidification Processing: Prospective and Retrospective Views of the
Industry and the Field" (Overview), D. Apelian, August
2000.
"The
Application of Neural Networks in the Modeling of Plate Rolling Processes"
(JOM-e: Applied Technology), A.A. Gorni, April 1997.
"JOM-e: The Application of Nondestructive Evaluation Technologies" (Commentary), P.K. Liaw, January 2003, pp. 10-11.
"Autonomous
Ultrahard Materials Discovery via Spreadsheet-Implemented Neural Network
Cascades" (JOM-e: Applied Technology), S.L. Thaler,
April 1997.
"Ceramic
Films Using Cathodic Electrodeposition" (JOM-e: Overview),
I. Zhitomirsky, January 2000.
"Ceria-Based
High-Temperature Coatings for Oxidation Prevention" (JOM-e:
Research Summary), S. Seal, S.K. Bose, and S.C. Kuiry, January
2000.
"The
Challenge of Precursor Compounds in the MOCVD of Oxides" (JOM-e:
Overview), R. Xu, October 1997.
"The
CMSF Process: The Spray Forming of Clean Metal" (JOM-e: Overview),
W.T. Carter, Jr., M.G. Benz, A.K. Basu, R.J. Zabala, B.A. Knudsen, R.M.
Forbes Jones, H.E. Lippard, and R.L. Kennedy, April 1999.
"A Computational Materials Science Course for Undergraduate Majors" J.M. Rickman and R.P. Vinci, December 2003.
"Computational Materials Science and Materials Informatics: Glossary," (JOM-e: Speakers' Slides), K. Ferris, March 2007.
"The
Cyclic Oxidation Performance of Aluminide and Pt-Aluminide Coatings
on Cast Ni-Based Superalloy CM-247" (JOM-e: Research Summary),
D.K. Das, V. Singh, and S.V. Joshi, January 2000.
"Data Mining and Materials Informatics: A Primer," (JOM-e: Speakers' Slides), K. Rajan, March 2007.
"Data Organization and Knowledge Discovery," (JOM-e: Speakers' Slides), P. Mason, March 2007.
"Data Patterns and Links to Materials Theory: Theoretical Foundations for Heuristic Pattern Detectio," (JOM-e: Speakers' Slides), K. Ferris, March 2007.
"Developing,
Integrating, and Sharing Web-Based Resources for Materials Education."
(JOM-e: Overview), D.J.M. Clark, May 1998.
"Discrete
Modeling via Function Approximation Methods: Bridging Atomic- and Microscales"
(JOM-e: Overview), A.G. Jackson and M.D. Benedict, August 1999.
"Electromagnetic
Enhancement of Melt Spinning and Strip Casting." (JOM-e: Overview),
J.S.-J. Chen, K. Zhang, M.N.O. Sadiku, and A.A. Tseng, February 1998.
"Embedded NDE with Piezoelectric Wafer-Active Sensors in Aerospace Applications" (JOM-e: Overview), V. Giurgiutiu, January 2003.
"Everything
You Need to Know about Being a Manager but Never Learned in College"
(JOM-e: Overview), N. Bahtishi, June 1999.
"Extrusion
Die Design: A New Methodology of Using Design of Experiments as a Precursor
to Neural Networks" (JOM-e: Overview), B.V. Mehta, H.
Ghulman, and R. Gerth, September 1999.
"The Food Industry's Global Challenges and Opprotunities" (JOM-e), A.P. Holenstein, January 2005.
"Functional
Coatings and Their Applications: A Web Perspective" (Commentary),
N.B. Dahotre, January 2000, p. 14.
"The
Functionality of Laser-Surface-Engineered Composite Titanium Diboride
Coatings" (JOM-e: Research Summary), A. Agarwal and
N.B. Dahotre, January 2000.
"Grain
Refinement in Aluminum Alloys by Means of Electromagnetic Vibrations
Including Cavitation Phenomena" (JOM-e: Overview), C.
Vivés, February 1998.
"High-Density-Infrared
Transient Liquid Coatings" (JOM-e: Overview), C.A. Blue,
V.K. Sikka, E.K. Ohriner, P.G. Engleman, and D.C. Harper, January 2000.
"Holistic
Strategies for Designing Multistage Materials Processes" (Overview),
W.G. Frazier and E.A. Medina, September 1999.
"Implications for National Policy" (JOM-e), T. Marichaux, June 2005.
"Implications for Corporate Research Management" (JOM-e), D. Chong, June 2005.
"Implications for National Laboratories" (JOM-e), L. Horton, June 2005.
"Implications for Government Agencies" (JOM-e), S. Johnson, June 2005.
"Implications for Universities" (JOM-e), H. Rack, June 2005.
"Implications for the Electronics Industry" (JOM-e), D. Frear, June 2005.
"Implications for the Manufacturing Industry" (JOM-e), D. Apelian, June 2005.
"Implications for Materials Societies" (JOM-e), B. Mishra, June 2005.
"Incorporating
Hybrid Models into a Framework for Designing Multistage Material Processes"
(Overview), E.A. Medina, September 1999.
"An Integrated Education Program on Computational Thermodynamics, Kinetics, and Materials Design" (JOM-e: Overview), Z.-K. Liu, L.-Q. Chen, K.E. Spear, and C. Pollard, December 2003.
"Intellectual
Property Models for Collaborative Research and Development"
(JOM-e: Overview), P. Ziarnik, June 1999.
"Investigating
Solidification with the Laser-Engineered Net Shaping (LENSTM) Process"
(JOM-e: Overview), W. Hofmeister, M. Wert, J. Smugeresky, J.A.
Philliber, M. Griffith, and M. Ensz, July 1999.
"Managing
Research and Development under Multicompany Collaboration"
(JOM-e: Overview), J.P. Reimann, June 1999.
"Materials in Architecture: Will We Ever Meet the Demands?" (JOM-e), S.N. Pollalis, January 2005.
"Materials Engineering Challenges for the Society of "Tomorrow": Housing, Transportation, Health, and Food Delivery Needs" (JOM-e), D. Apelian, January 2005.
"The Materials Informatics Workshop: Theory and Application" (Conference Review), L.M. Peurrung, K. Ferris, and T.M. Osman, March 2007, pp. 50.
"Materials Informatics: Theory and Application (Introduction)," (JOM-e: Speakers' Slides), K. Rajan, March 2007.
"Metal-Casting
Process Design: Postmortem and Predictive Troubleshooting"
(JOM-e: Research Summary), T.Y. Goraya, M.S. Soclof, D.G. Yan,
and Z. Meng, April 1997.
"The
Microstructural Characterization of Sensors Based on Electronic Ceramic
Materials." (JOM-e: Overview), P.I. Gouma, S.A. Akbar,
and M.J. Mills, November 1998.
"The
Mobility of Ions in Lanthanum Fluoride Nanoclusters" (JOM-e:
Research Summary), V.L. Bulatov, R.W. Grimes, and A.H. Harker,
April 1997.
"Modeling
and Simulating Metal-Forming Equipment" (JOM-e: Applied
Technology), W.G. Frazier, E.A. Medina, W.M. Mullins, and R.D. Irwin,
April 1997.
"Modeling
the Gas By-products of Metalorganic Chemical Vapor Deposition"
(JOM-e: Research Summary), J.G. Jones and P.D. Jero, August 1999.
"Monitoring
the Solidification of Single-Crystal Castings Using High-Energy X-Ray
Diffraction" (JOM-e: Research Summary), D.W. Fitting,
W.P. Dubé, and T.A. Siewert, July 1999.
"Multimedia
Tutorials for an Introductory Course on the Science of Engineering Materials"
(JOM-e: Overview), C.J. McMahon, Jr., and R. Weaver, May 1998.
"National
Science Foundation Opportunities for Collaborative Research"
(JOM-e: Overview), B.A. MacDonald, June 1999.
"The NDE Analysis of Tension Behavior in Nicalon/SiC Ceramic-Matrix Composites" (JOM-e: Overview), J. Kim, P.K. Liaw, and H. Wang, January 2003.
"The
Nondestructive Evaluation of Advanced Ceramics and Ceramic-Matrix Composites"
(JOM-e: Overview), J. Kim and P.K. Liaw, November 1998.
"The
November JOM-e: The NDE of Material Properties" (Commentary),
P.K. Liaw, November 1998, p. 66.
"NSDL Materials Digital Library Pathway," (JOM-e: Speakers' Slides), L. Bartolo, March 2007.
"The
Numerical Analysis of Creep Deformation and Cavitation in TiAl Intermetallic
Alloys" (JOM-e: Research Summary), A. Chakraborty and
J.C. Earthman, August 1998.
"Observing
and Measuring Solidification Phenomena at High Temperatures"
(JOM-e: Overview), C. Orrling, Y. Fang, N. Phinichka, S. Sridhar,
and A.W. Cramb, July 1999.
"Our Experience in Teaching Thermodynamics at the University of Wisconsin, Madison" (JOM-e: Overview), Y.A. Chang and W.A. Oates, December 2003.
"An
Overview of the Aluminum Industry" (Overview), R.B.
Evans, August 2000.
"A
Perspective on Aluminum Metal Treatment" (Overview),
C.E. Eckert, August 2000.
"Predicting
Microstructure from Atomistic Rule Set Cellular Automata" (JOM-e:
Overview), K.J.W. Atkinson, R.W. Grimes, M.O. Zacate, P.D. Lee,
A.G. Jackson, and S.R. LeClair, August 1999.
"Producing
Functionally Graded Coatings by Laser-Powder Cladding" (JOM-e:
Research Summary), Y.T. Pei and J.Th.M. De Hosson, January 2000.
"Production-Scale
Spray Forming of Superalloys for Aerospace Applications" (JOM-e:
Industrial Insight), G.A. Butzer, April 1999.
"Recent
Developments in the Thermomechanical Fatigue Life Prediction of Superalloys"
(JOM-e: Overview), C. Cai, P.K. Liaw, M. Ye, and J. Yu, April
1999.
" Recycling Opportunities, Technical Challenges, and Illusions" (JOM-e), D.B. Spencer, January 2005.
"Restoring Health, from Replacement Parts to Regenerative Medicine: Challenges and Opportunities" (JOM-e), A.J. Coury, January 2005.
"The Role of Materials in Sustainable Mobility—Examining Long-Term Vehicular Materials Usage" (), R. Kirchain, January 2005.
"Software for Teaching Materials Processing and Diffusion" (JOM-e: Overview), S.E. Mohney, A.J. Miller, and G.L. Gray, December 2003.
"Solidification
Processing of Materials in Magnetic Fields" (JOM-e: Overview),
B.Q. Li, February 1998.
"The
Solubility of Silica in Calcium Ferrite Slags" (JOM-e: Research
Summary), C.M. Acuña and A. Yazawa, October 1997.
"Spray
Forming: Alloys, Products, and Markets" (JOM-e: Overview),
A. Leatham, April 1999.
"Surviving
a Layoff" (JOM-e: Overview), E. Schwartz, June 1999.
"JOM-e: The Symposium on Computational Methods in Materials Education" (Commentary), Z.-K. Liu, L.-Q. Chen, and M. Asta, December 2003, p. 13.
"The
Thermocyclic Behavior of Differently Stabilized and Structured EB-PVD
TBCs" (JOM-e: Research Summary), U. Schulz, K. Frischer,
C. Leyens, M. Peters, and W.A. Kaysser, October 1997.
"Thermography: A New Nondestructive Evaluation Method in Fatigue Damage" (JOM-e: Overview), B. Yang, P.K. Liaw, H. Wang, J.Y. Huang, R.C. Kuo, and J.G. Huang, January 2003.
"The Three-Dimensional
Simulation of Flow Pattern in Equal-Channel Angular Extrusion"
(JOM-e: Overview), H.J. Cui, R.E. Goforth, and K.T. Hartwig,
August 1998.
"The
2002 TMS Annual Meeting Cyanide Roundtable" (Cyanide Roundtable
Discussion), Corby Anderson and Courtney Young, December 2001.
"The
Use of Multimedia in Developing Undergraduate Engineering Courses"
(JOM-e: Overview), V.R. Voller, J.F. Watson, and S. Hoover, May
1998.
"Using
Acoustic Emission in Fatigue and Fracture Materials Research"
(JOM-e: Research Summary), M. Huang, L. Jiang, P.K. Liaw, C.R.
Brooks, R. Seeley, and D.L. Klarstrom, November 1998.
"Using
Fuzzy Logic for Molecular Modeling" (JOM-e: Overview),
D.A. Ress, August 1999.
"Using
Hybrid Modeling for Testing Intelligent Software for Lunar-Mars Closed
Life Support"(JOM-e: Overview), J.T. Malin, September
1999.
"Using
Hybrid Modeling for the Interdisciplinary Design of More Affordable
Systems" (Overview), J.W. Poindexter, B.A. Stucke, and
G.C. Shumaker, September 1999.
"Using
Scanning Acoustic Microscopy to Study Subsurface Defects and Crack Propagation
in Materials" (JOM-e: Research Summary), Z.M. Connor,
M.E. Fine, J.D. Achenbach, and M.E. Seniw, November 1998.
"Wettability,
Spreading, and Interfacial Phenomena in High-Temperature Coatings"
(JOM-e: Overview), R. Asthana and N. Sobczak, January 2000.
"The World is Flat: The Globalization of Materials R&D" (Conference Review), T. Marechaux and W.H. Hunt, Jr., June 2005, pp. 12-13.