METALLURGICAL AND MATERIALS TRANSACTIONS A
TABLE OF CONTENTS
Volume 25A, No. 2, February 1994

This Month Featuring: Alloy Phases; Transformations; Mechanical Behavior; Surface Treatment; and Solidification.

Alloy Phases

The to Interface Phase in Titanium Alloys: Artifact or Real Phase Contribution to Problem Resolution [pp. 241-248]
F. Cortial

Structure of as-Deposited Iron-Zinc Coatings Chloride Bath [pp. 249-255]
C.A. Drewien, J.I. Goldstein, and A.R. Marderfrom

Communication: Ordering and Mechanical Strength in Ll2 Cubic Titanium Trialuminides [pp. 449-451]
D.G. Morris

Transformations

Precipitation Effects during Hot Deformation of a Copper Alloy [pp. 257-266]
L. Blaz, E. Evangelista, and M. Niewczas

Influence of Tempering Temperature on Stability of Carbide Phases in 2.6Cr-0.7Mo-0.3V Steel with Various Carbon Content [pp. 267-275]
J. Janovec, A. Vyrostkova, and M. Svoboda

Compositional and Microstructural Changes Which Attend Reheating and Grain Coarsening in Steels Containing Niobium [pp. 277-286]
E.J. Palmiere, C.I. Garcia, and A.J. DeArdo

Mechanical Behavior

Effect of Orientation on Crystallographic Cracking in Notched Nickel-Base Superalloy Single Crystal Subjected to Far-Field Cyclic Compression [pp. 287-297]
P.B. Aswath

Tensile Ductility of Extrinsically Toughened Intermetallics [pp. 299-308]
K.S. Chan

Low-Cycle Fatigue Behavior of Polycrystalline NiAl at 1000K [pp. 309-319]
B.A. Lerch and R.D. Noebe

Environmental Effect on Room-Temperature Ductility of Isothermally Forged TiAl-Base Alloys [pp. 321-330]
Morihiko Nakamura, Naoyuki Itoh, Kenki Hashimoto, Tokuzo Tsujimoto, and Toshiyuki Suzuki

Elastic Constants of Some Transition-Metal-Disilicide Single Crystals [pp. 331-340]
Morihiko Nakamura

Characterization of Inhomogeneous Elastic Deformation with X-ray Diffraction [pp. 341-347]
I.C. Noyan and L.S. Schadler

Estimation of Interfacial Shear Strength between Superconducting Oxides and Silver Sheath from Multiple-Fracture Phenomenon of the Oxide [pp. 349-356]
Shojiro Ochiai, Kenji Hayasi, and Kozo Osamura

The Tensile Deformation Behavior of AA3004 Aluminum Alloy [pp. 357-364]
D. Park and J.G. Morris

Elevated Temperature Fracture of RS/PM Alloy 8009: Part I. Fracture Mechanics Behavior [pp. 365-379]
William C. Porr, Jr. and Richard P. Gangloff

Mechanical Processing of Iron Powders in Reactive and Nonreactive Gas Atmospheres [pp. 381-388]
James C. Rawers and Randy C. Doan

Softening and Microstructrucal Change Following the Dynamic Recrystallization of Austenite [pp. 389-400]
C. Roucoules, P.D. Hodgson, S. Yue, and J.J. Jonas

Some Aspects of Thermomechanical Fatigue of AISI 304L Stainless Steel: Part I. Creep-Fatigue Damage [pp. 401-406]
R. Zauter, H.-J. Christ, and H. Mughrabi

Some Aspects of Thermomechanical Fatigue of AISI 304L Stainless Steel: Part II. Dislocation Arrangements [pp. 407-413]
R. Zauter, H.-J. Christ, and H. Mughrabi

Analysis of Thermally Induced Stress and Strain Continuous Fiber-Reinforced Composites [pp. 415-425]
Hongyan Zhang, P.M. Anderson, and Glenn S. Daehnin

Surface Treatment

Depth of Melt-Pool and Heat-Affected Zone in Laser Surface Treatments [pp. 427-435]
P.H. Steen, P. Ehrhard, and A. Schussler

Solidification

Effect of Alloying Elements on the Solidification Characteristics and Microstructure of Al-Si-Cu-Mg-Fe 380 Alloy [pp. 437-448]
S. Gowri and F.H. Samuel

Contents: Metallurgical and Materials Transactions B, Volume 25B, February 1994 [p. 452]

Direct questions about this or any other Metallurgical and Materials Transactions page to mettrans@andrew.cmu.edu.

Search TMS Document Center Tables of Contents Subscriptions Met. and Mat. Trans. TMS OnLine