Met and Mat Trans Contents A: May 1994

METALLURGICAL AND MATERIALS TRANSACTIONS A

TABLE OF CONTENTS Volume 25A, No. 5, May 1994 This Month Featuring: Alloy Phases; Transformations; Transport Phenomena; Mechanical Behavior; Environment; and Solidification.

METALLURGICAL AND MATERIALS TRANSACTIONS A

TABLE OF CONTENTS
Volume 25A, No. 5, May 1994

This Month Featuring: Alloy Phases; Transformations; Transport Phenomena; Mechanical Behavior; Environment; and Solidification.

Alloy Phases

Aging of Freshly Formed Fe-Based Martensites at Low Temperatures [pp. 889-909]
K. Ullakko, V.G. Garvriljuk and V.M. Nadutov

Transformations

Chemical Composition and Structural Identification of Eutectic Carbide in 1 Pct Mn Ductile Iron [pp. 911-918]
M. Nili Ahmadabadi, E. Niyama, M. Tanino, T. Abe, and T. Ohide

Efficient Measurement of Microstructural Surface Area Using Trisector [pp. 919-928]
Arun M. Gokhale and William J. Drury

Intragranular Ferrite Nucleation in Medium-Carbon Vanadium Steels [pp. 929-936]
Fusao Ishikawa, Toshihiko Takahashi, and Tatsurou Ochi

Morphology Development in Hot-Dip Galvanneal Coatings [pp. 937-947]
C.E. Jordan and A.R. Marder

Transport Phenomena

Gas Trapping and Release in Polycrystalline Nickel Preimplanted with Helium [pp. 949-959]
E. Abramov and D. Eliezer

Mechanical Behavior

Fracture of Glass in Tensile and Bending Tests [pp. 961-968]
Orestes E. Alarcón, Ricardo E. Medrano, and Peter P. Gillis

Effect of Microstructure (Particulate Size and Volume Fraction) and Counterface Material on the Sliding Wear Resistance of Particulate- Reinforced Aluminum Matrix Composites [pp. 969-983]
A.T. Alpas and J. Zhang

High-Performance Ni₃Al Synthesized from Composite Powders [pp. 985-992]
Wen-Chih Chiou and Chen-Ti Hu

Crack Initiation at Long Radial Hydrides in Zr-2.5Nb Pressure Tube Material at Elevated Temperatures [pp. 993-1004]
R. Choubey and M.P. Puls

Fatigue Crack Growth Rates and Fracture Toughness of Rapidly Solidified Al-8.5 Pct Fe-1.2 Pct V-1.7 Pct Si Alloys [pp. 1005-1014]
S. Hariprasad, S.M.L. Sastry, K.L. Jerina, and R.J. Lederich

The Effects of H on the Mechanical Behavior of Austenitic Stainless Steels at Room Temperature [pp. 1015-1023]
Q.Y. Long, C.G. Fan, Z.S. Xing, and Y.Y. Li

Textural and Microstructural Gradient Effects on the Mechanical Behavior of a Tantalum Plate [pp. 1025-1031]
S.I. Wright, G.T. Gray III, and A.D. Rollett

Communication: Evaluation of Homogeneous Compression Flow Curves Using Square Cross-Sectioned Specimens [pp. 1095-1097]
K.K. Ray, K.V.S.J. Rao, and A. Ghosh

Environment

The Effect of Nb Morphology on the Cyclic Oxidation Resistance of MoSi₂/20 vol pct Nb Composites [pp. 1033-1040]
D.E. Alman and N.S. Stoloff

Auger Electron Analysis of the Initial Oxidation of Titanium Aluminides Based on Ti-48Al [pp. 1041-1050]
Y.T. Peng, P.B. Aswath, and A.R. Koymen

Solidification

Modeling of the Formation of Under-Riser Macrosegregation during Solidification of Binary Alloys [pp. 1051-1062]
Q.Z. Diao and H.L. Tsai

Modeling Microstructure Development in Gray Cast Irons [pp. 1063-1079]
David D. Goettsch and Jonathan A. Dantzig

Prediction of Columnar to Equiaxed Transition during Diffusion-Controlled Dendritic Alloy Solidification [pp. 1081-1093]
C.Y. Wang and C. Beckermann

Communication: Solidification Macrostructures and Macrosegregation in Aluminum Alloys Cooled from Above [pp. 1097-1102]
D.G. McCartney and S.M. Ahmady

Communication: Calorimetric Evaluation of Nonequilibrium State in As-Melt Spun Al-1.72 and Al.3.12 At. Pct Cu Alloys and Al-6.74, Al-8.48, and Al-11.97 At. Pct Si Alloys [pp. 1102-1104]
Y. Zhang, T. Yamane, S. Saji, and J. Takahashi

Direct questions about this or any other Metallurgical and Materials Transactions page to mettrans@andrew.cmu.edu.

Search TMS Document Center Tables of Contents Subscriptions Met. and Mat. Trans. TMS OnLine