METALLURGICAL AND MATERIALS T RANSACTIONS A
TABLE OF CONTENTS
Volume 25A, No. 7, July 1994

This Month Featuring: Alloy Phases; Transformations; Mechanical Behavior; Physical Chemistry; Environment; Welding and Joining; and Solidification.

Alloy Phases

Grain-Boundary Structures in Hexagonal Materials: Coincident and Near Coincident Grain Boundaries [pp. 1337-1346]
Diana Farkas

Phase Relations and Gibbs Energies in the System Mn-Rh-O [pp. 1347-1357]
K.T. Jacob and M.V. Sriram

Formation and Stability of Fe-Rich Precipitates in Dilute Zr(Fe) Single-Crystal Alloys [pp. 1359-1365]
H. Zou, G.M. Hood, J.A. Roy, and R.J. Schultz

Transformations

Effects of Alloying Elements upon Austenite Decomposition in Low-C Steels [pp. 1367-1379]
J.K. Chen, R.A. Vandermeer, and W.T. Reynolds, Jr.

Mechanical Behavior

Micromechanism of the Transition of Fibrous Cracking to Cleavage of C-Mn Base and Weld Steel [pp. 1381-1390]
J.H. Chen and G.Z. Wang

A Fully Plastic Microcracking Model for Trans-granular Stress-Corrosion Cracking in Planar-Slip Materials [pp. 1391-1401]
W.F. Flanagan, Min Wang, M. Zhu, and B.D. Lichter

Relationship between Microstructure and Mechanical Properties of a Spinodally Decomposing Cu-15Ni-8Sn Alloy Prepared by Spray Deposition [pp. 1403-1412]
Ph. Hermann and D.G. Morris

Fatigue of Unidirectional SCS-6/Ti-24Al-11Nb Composite Containing a Circular Hole [pp. 1413-1424]
J.R. Jira and J.M. Larsen

Influence of Initial Texture on the Microstructural Instabilities during Compression of Commercial-Titanium at 25°C to 400°C [pp. 1425-1434]
Satish V. Kailas, Y.V.R.K. Prasad, and S.K. Biswas

Micromechanism of Accelerated Near-Threshold Fatigue Crack Growth in Al2O3/Al-Cu Composite at Elevated Temperature [pp. 1435-1442]
Gang Liu, Daping Yao, and J.K. Shang

A Comparison of the Mechanical Properties and Microstructures of Intermetallic Matrix Composites Fabricated by Two Different Methods [pp. 1443-1455]
Rebecca A. MacKay, Susan L. Draper, Ann M. Ritter, and Paul A. Siemers

The Influence of Hydrostatic Pressure on Fracture of Single-Crystal and Polycrystalline NiAl [pp. 1457-1470]
R.W. Margevicius and J.J. Lewandowski

Global Constraint-Insensitive Fracture in SiC Particulate-Reinforced AA 2009 [pp. 1471-1479]
Brian P. Somerday and Richard P. Gangloff

Influence of Microstructure on Tensile Properties of Spheroidized Ultrahigh-Carbon (1.8 Pct C) Steel [pp. 1481-1493]
C.K. Syn, D.R. Lesuer, and O.D. Sherby

Communication: Confirmation of Machine-Induced Load Oscillations during Superplastic Tensile Testing [pp. 1545-1547]
C.H. Johnson and C.H. Hamilton

Communication: Effect of Mn-Dispersoid on the Low-Cycle Fatigue Life of Al-Zn-Mg Alloys [pp. 1547-1550]
Dong Seok Park, Byeong Ook Kong, and Soo Woo Nam

Physical Chemistry

Thermochemistry of Binary Alloys of Transition Metals: The Systems Cu-Ce, Me-Pr, and Me-Nd (Me=Cu, Ag, Au) [pp. 1495-1500]
K. Fitzner and O.J. Kleppa

Environment

Oxidation Behavior of Single-Crystal Al2O3-Fiber-Reinforced Ni3Al-Based Composites [pp. 1501-1507]
S. Nourbakhsh, W.H. Rhee, O. Sahin, and H. Margolin

Welding and Joining

Intermetallic Growth and Mechanical Behavior of Low and High Melting Temperature Solder Alloys [pp. 1509-1523]
D.R. Frear and P.T. Vianco

Solidification

Modeling Solidification of Turbine Blades Using Theoretical Phase Relationships [pp. 1525-1533]
Shuang-Lin Chen, W. Oldfield, Y. Austin Chang, and M.K. Thomas

Effect of Magnetic Field on the Microstructure and Macrosegregation in Directionally Solidified Pb-Sn Alloys [pp. 1535-1544]
S.N. Tewari, Rajesh Shah, and Hui Song

Communication: Solidification and Microstructure of a High Alloy Stainless Steel [pp. 1550-1553]
Zi-Kui Liu, Donald Pile, Jan-Olof Andersson, and Anders Brorson

Correction [p. 1555]

Direct questions about this or any other Metallurgical and Materials Transactions page to mettrans@andrew.cmu.edu.

Search TMS Document Center Tables of Contents Subscriptions Met. and Mat. Trans. TMS OnLine