| METALLURGICAL AND MATERIALS TRANSACTIONS A | |
|---|---|
|
|
|
Volume 25A, No. 12, December 1994 This Month Featuring: Pacific Rim Conference--Part II; Alloy Phases; Transformations; Transport Phenomena; Mechanical Behavior; Physical Chemistry; Surface Treatment; and Solidification.
|
|
Thermodynamic Consideration of Formation Mechanism of
1 Plate in
Cu-Base Alloys [pp. 2555-2563]
T.Y. Hsu (Xu Zuyao) and X.W. Zhou
Long-Range Ordering in the Early Stages of Precipitation--A Brief Review [pp. 2565-2568]
J.B. Cohen
High-Resolution Analytical Electron Microscopy Study of Isothermal Plate-Shaped Products in Some
-Phase Alloys [pp. 2569-2579]
T. Tadaki and K. Shimizu
Transformation Characteristics of
1 Plates in Cu-Zn-Al Alloys [pp. 2581-2599]
M.H. Wu, Y. Hamada, and C.M. Wayman
The Formation Mechanism of Plate in Beta Cu-Zn and Cu-Zn-Al Alloys [pp. 2601-2608]
X.K. Meng, M.K. Kang, Y.Q. Yang, and D.H. Liu
Growth Kinetics and High-Temperature TEM in situ Observation of Bainite in a Cu-Zn Alloy [pp. 2609-2614]
Y.Q. Yang, D.H. Liu, X.K. Meng, and M.K. Kang
Study on the Transformation Mechanism of
1 Plates in a Cu-Zn-Al Alloy [pp. 2615-2619]
Hong-Sheng Fang and Chun-Ming Li
A Discussion on the Formation of Bainite and Other Precipitates in Cu-Zn and Ag-Zn Alloys [pp. 2621-2629]
K. Takezawa, S. Maruyama, K. Marukawa, and S. Sato
Mechanism of the Early Stages of
1 Plate Formation in a Cu-39 Pct Zn Alloy [pp. 2631-2637]
N. Ravishankar, H.I. Aaronson, and K. Chattopadhyay
The Selection of Precipitate Habit Planes in Cr-32 Wt Pct Ni [pp. 2639-2646]
J.K. Chen, T.W. Ross III, G. Chen, M. Kikuchi, and W.T. Reynolds, Jr.
Bainitelike Transformations in Some Oxide Ceramics [pp. 2647-2653]
N. Nakanishi, T. Shigematsu, T. Furukawa, and N. Machida
General Discussion Sessions of the "Pacific Rim Conference on the Roles of Shear and Diffusion in the Formation of Plate-Shaped Transformation Products" [pp. 2655-2673]
H.I. Aaronson, J.P. Hirth, B.B. Rath, and C.M. Wayman
Communication: The Chromium Equivalents of Ferrite Stabilizers in Commercial Stainless Steels [pp. 2827-2828]
V. Ragahavan and Dara P. Antia
Diffusional Boundary Conditions during Coarsening of Elastically Interacting Precipitates [pp. 2695-2703]
Werner Hort and William C. Johnson
Communication: The Cause of Matrix Penetration of W/W Grain Boundaries during Heat Treatment of W-Ni-Fe Heavy Alloy [pp. 2828-2831]
Joon-Wong Noh, Moon-Hee Hong, Geun-Hong Kim, Suk-Joong L. Kang, and Duk Yong Yoon
The Effect of Inertia on Tensile Ductility [pp. 2723-2735]
Xiaoyu Hu, Robert H. Wagoner, Glenn S. Daehn, and Somnath Ghosh
Effect of Internal Heating during Hot Compression on the Stress-Strain Behavior of Alloy 304L [pp. 2737-2752]
M.C. Mataya and V.E. Sackschewsky
Microstructure Development during Conventional and Isothermal Hot Forging of a Near-Gamma Titanium Aluminide [pp. 2753-2768]
S.L. Semiatin, V. Seetharaman, and V.K. Jain
Microstructures and Mechanical Behavior of NiAl-Mo and NiAl-Mo-Ti Two-Phase Alloys [pp. 2769-2781]
P.R. Subramanian, M.G. Mendiratta, and D.B. Miracle
Effects of Texture Gradients on Yield Loci and Forming Limit Diagrams in Various Aluminum-Lithium Sheet Alloys [pp. 2783-2795]
Xiao-Hu Zeng and Frédéric Barlat
Communication: Elastic Constants of SiCp/Al: Measurements and Modeling [pp. 2832-2835]
Ming Lei and Hassel Ledbetter
Communication: Elastic Compliance and Hill's Quadratic Yield Function for Weakly Orthotropic Sheets of Cubic Metals [pp. 2835-2837]
Chi-Sing Man
Contents: Metallurgical and Materials Transactions B, Volume 25B, December 1994 [p. 2841]
Combined Index to Volumes 25A and 25B
| Search | TMS Document Center | Tables of Contents | Subscriptions | Met. and Mat. Trans. | TMS OnLine |
|---|