METALLURGICAL AND MATERIALS TRANSACTIONS A
TABLE OF CONTENTS
Volume 26A, No. 3, March 1995

This Month Featuring: Alloy Phases; Transformations; Mechanical Behavior; Physical Chemistry; Environment; Solidification

Alloy Phases

Identification of M5C2 Carbides in Ex-Service lCr-0.5Mo Steels [pp. 509-520]
S.D. Mann, D.G. McCulloch, and B.C. Muddle

Ti2NAl in Ll2 Al3Ti-Base Alloys [pp. 521-524]
Z.L. Wu, D.P. Pope, and V. Vitek

Transformations

Catalyst Effects in Heterogeneous Nucleation of Acicular Ferrite [pp. 525-534]
Ø. Grong, A.O. Kluken, H.K. Nylund, A.L. Dons, and J. Hjelen

Calculations of / Phase Boundaries in Fe-C-X1-X2 Systems from the Central Atoms Model [pp. 535-545]
T. Tanaka, H.I. Aaronson, and M. Enomoto

Nucleation Kinetics of Grain Boundary Allotriomorphs of Proeutectoid Ferrite in Fe-C-Mn-X2 Alloys [pp. 547-559]
T. Tanaka, H.I. Aaronson, and M. Enomoto

Growth Kinetics of Grain Boundary Allotriomorphs of Proeutectoid Ferrite in Fe-C-Mn-X2 Alloys [pp. 561-580]
T. Tanaka, H.I. Aaronson, and M. Enomoto

The Age-Hardening Characteristics of an Al-6061/Al2O3 Metal Matrix Composite [pp. 581-587]
Jingtao Wang, Minoru Furukawa, Zenji Horita, Minoru Nemoto, Yan Ma, and Terence G. Langdon

Mechanical Behavior

Microstructural and Failure Characteristics of Metal-Intermetallic Layered Sheet Composites [pp. 589-599]
D.E. Alman, J.C. Rawers, and J.A. Hawk

Texture Evolution Induced by Strain Path Changes In Low Carbon Steel Sheets [pp. 601-613]
B. Bacroix and Zaiqian Hu

Processing and Mechanical Properties of Al2O3 Fiber-Reinforced NiAl Composites [pp. 615-628]
R.R. Bowman, A.K. Misra, and S.M. Arnold

X-Ray Measurement of Lattice Strains in Textured Low Carbon Steel under Uniaxial Loading [pp. 629-632]
C.H. Chang and Y.M. Koo

An Investigation of Strain Hardening and Creep in an Al-6061/Al2O3 Metal Matrix Composite [pp. 633-639]
Minoru Furukawa, Jingtao Wang, Zenji Horita, Minoru Nemoto, Yan Ma, and Terence G. Langdon

Slip-Step Dissolution and Micromechanical Analysis to Model Stress-Corrosion Crack Growth of Type 321 Stainless Steel in Boiling MgCl2 [pp. 641-646]
X. Mao and D. Li

Temperature-Dependence Mechanism of Tensile Strength of Si-Ti-C-O Fiber-Aluminum Matrix Composites [pp. 647-652]
Shojiro Ochiai, Kenji Matsunaga, Yoshiharu Waku, Takemi Yamamura, Masaki Hojo, and Kozo Osamura

A Mathematical Model for Gravity-Induced Distortion during Liquid-Phase Sintering [pp. 653-659]
R. Raman and Randall M. German

Deformation-Induced Martensitic Characteristics in 304 and 316 Stainless Steels during Room-Temperature Rolling [pp. 661-671]
Vijay Shrinivas, S.K. Varma, and L.E. Murr

Influence of Subsolvus Thermomechanical Processing on the Low-Cycle Fatigue Properties of HAYNES 230 Alloy [pp. 673-689]
Kenneth S. Vecchio, Michael D. Fitzpatrick, and Dwaine Klarstrom

Microstructure and High-Temperature Tensile Deformation of TiAl(Si) Alloys Made from Elemental Powders [pp. 691-701]
G.-X. Wang, B. Dogan, F.-Y. Hsu, H.-J. Klaar, and M. Dahms

Elevated Temperature Tensile Behavior of Ti-25Al-10Nb-3V-1Mo [pp. 703-720]
C.H. Ward, A.W. Thompson, and J.C. Williams

Mechanisms of Internal Friction in a Cu-Zn-Al Shape Memory Alloy [pp. 721-724]
T. Xiao and G.P. Johari

Communication: Study of Cooperative Grain Boundary Sliding by Using Macroscopic Marker Lines [pp. 747-750]
M.G. Zelin and A.K. Mukherjee

Physical Chemistry

The Chemical Kinetics of Mechanical Alloying [pp. 725-730]
J.S. Forrester and G.B. Schaffer

Environment

Investigation of Deformation Field and Hydrogen Partition around Crack Tip in Fcc Single Crystal [pp. 731-739]
Shuming Sun, Kazuaki Shiozawa, Jialin Gu, and Nanping Chen

Solidification

Electrical Resistivity of Pb and Pb-10 Wt Pct Sn during Solidification [pp. 741-745]
S.H. Liu, D.R. Poirier and P.N. Ocansey
Direct questions about this or any other Metallurgical and Materials Transactions page to mettrans@andrew.cmu.edu.

Search TMS Document Center Tables of Contents Subscriptions Met. and Mat. Trans. TMS OnLine