METALLURGICAL AND MATERIALS TRANSACTIONS A
	TABLE OF CONTENTS Volume 26A, No. 4, April 1995 This Month Featuring: Alloy Phases; Transformations; Transport Phenomena; Mechanical Behavior; Environment; Welding and Joining; Surface Treatment; Solidification. View April 1995 Abstracts.

Alloy Phases

Multiple Twins of ²-Al₁₃Co₄ Showing Fivefold Symmetry

Communication: Phase Equilibria of Al-Rich Al-Cu-Mg Alloys [pp. 1007-1011]
Cheng-Chia Huang and Sinn-Wen Chen

Communication: Characterization of the Microstructure of Deformed Al-Zn-Cu Alloys by X-Ray Diffraction Line Profile Analysis [pp. 1011-1013]
Hiranmay Pal, S.K. Pradhan, and M. De

Transformations

The Kinetics of Multilayered Titanium-Silicide Coatings Grown by the Pack Cementation Method [pp. 777-791]
Brian V. Cockeram and Robert A. Rapp

Rapid Graphitization of a Pulsed Laser Remelted Ductile Cast Iron during Multipass Overlap Melting [pp. 793-800]
H.M. Wang and H.W. Bergmann

Recrystallization of Molybdenum Wire Doped with Potassium-Silicate [pp. 801-816]
Myoung Ki Yoo, Yutaka Hiraoka, and Ju Choi

Transport Phenomena

Mechanical Behavior

Internal Hydrogen Embrittlement of a Ferritic Stainless Steel [pp. 845-849]
J.-H. Huang and C.J. Altstetter

Damping Characteristics of Ti₅₀Ni_49.5Fe_0.5 and Ti₅₀Ni₄₀Cu₁₀ Ternary Shape Memory Alloys [pp. 851-858]
H.C. Lin, S.K. Wu, and Y.C. Chang

Novel Oxide-Dispersion-Strengthened Copper Alloys from Rapidly Solidified Precursors: Part 1. Microstructural Development [pp. 859-871]
Michael S. Nagorka, Carlos G. Levi, and Glenn E. Lucas

Novel Oxide-Dispersion-Strengthened Copper Alloys from Rapidly Solidified Precursors: Part 2. Creep Behavior [pp. 873-881]
Michael S. Nagorka, Glenn E. Lucas, and Carlos G. Levi

Cracking Mechanisms in Thermally Cycled Ti-6Al-4V Reinforced with SiC Fibers [pp. 883-895]
S.H. Thomin, P.A. Noël, and D.C. Dunand

Interfaces in Continuous Filament-Reinforced Al₂O₃/NiAl Composites [pp. 897-903]
L. Wang, K. Xu, R.R. Bowman, and R.J. Arsenault

Grain Boundary Sliding in the Presence of Grain Boundary Precipitates during Transient Creep [pp. 905-914]
X.-J. Wu and A.K. Koul

Environment

Critical Analysis of Alloy 600 Stress Corrosion Cracking Mechanisms in Primary Water [pp. 925-939]
R. Rios, T. Magnin, D. Noel and O. de Bouvier

Welding and Joining

Surface Treatment

Modification of the 2-Type Matrix of Aluminide Diffusion Coatings on Nickel-Base Superalloys--Bulk Aluminide Analogues

On the Application of Magnetomechanical Models to Explain Damping in an Antiferromagnetic Copper-Manganese Alloy [pp. 957-964]
S. Laddha and D.C. Van Aken

Solidification

Formation and Suppression of Channels during Upward Solidification of a Binary Mixture [pp. 971-981]
Suresh V. Garimella, James P. McNulty, and Lei Z. Schlitz

Factors Affecting Pressure Infiltration of Packed SiC Particulates by Liquid Aluminum [pp. 983-990]
J. Narciso, A. Alonso, A. Pamies, C. García-Cordovilla, and E. Louis

Microstructure and Crystallographic Texture of Strip-Cast and Hot-Rolled Austenitic Stainless Steel [pp. 991-998]
D. Raabe

Gravity Segregation of Complex Intermetallic Compounds in Liquid Aluminum-Silicon Alloys [pp. 999-1006]
S.G. Shabestari and J.E. Gruzleski

Other