METALLURGICAL AND MATERIALS TRANSACTIONS A
TABLE OF CONTENTS
Volume 26A, No. 6, June 1995

This Month Featuring: The 1993 Edward DeMille Campbell Memorial Lecture; The 1993 Distinguished Lecture in Materials and Society; Alloy Phases; Transformations; Transport Phenomena; Mechanical Behavior; Physical Chemistry; Welding And Joining; Surface Treatment; Electronic, Magnetic, and Optical Material; Solidification.

The 1993 Edward DeMille Campbell Memorial Lecture

Concrete: The Advanced Industrial Material of the 21st Century [pp. 1321-1341]
Carolyn M. Hansson

The 1993 Distinguished Lecture in Materials and Society

Materials Technology and the Materials Industry: A Critical Transition [pp. 1343-1352]
Donald R. Muzyka

Alloy Phases

L-J Phase in a Cu2.2Mn0.8Al Alloy [pp. 1353-1365]
S.C. Jeng and T.F. Liu

Transformations

On the Decomposition of Phase in Some Rapidly Quenched Titanium-Eutectoid Alloys [pp. 1367-1377]
T.A. Bhaskaran, R.V. Krishnan, and S. Ranganathan

Structure of Mechanically Alloyed Ti-Al-Nb Powders [pp. 1379-1387]
Guo-Hao Chen, C. Suryanarayana, and F.H. (Sam) Froes

The Liquid Film Migration in a Sintered Fe-Cr-C Base Alloy [pp. 1389-1393]
Hyeon-Sang Shin, Jeong-Seog Kim, Duk-Yong Yoon, and Young-Duh Song

Recrystallization and Grain Growth Phenomena in a Particle-Reinforced Aluminum Composite [pp. 1395-1405]
D.C. Van Aken, P.E. Krajewski, G.M. Vyletel, J.E. Allison, and J.W. Jones

Communication: Grain-Boundary Precipitation and Fracture Behavior of an Al-Cu-Li-Mg-Ag Alloy [pp. 1591-1595]
Yiwen Mou, J.M. Howe, and E.A. Starke, Jr.

Transport Phenomena

Communication: Quantitative Analysis of Interfacial Chemistry in TiC/Ti Composite Using Electron-Energy-Loss Spectroscopy [pp. 1595-1597]
Mingyuan Gu, Weijie Jiang, and Guoding Zhang

Mechanical Behavior

Evidence of Shear Ligament Toughening in TiAl-Base Alloys [pp. 1407-1418]
Kwai S. Chan

Local Fatigue Damage Accumulation around Notch Attending Crack Initiation [pp. 1419-1430]
Y. Iino

Thermal Fracture Endurance of Cast Irons with Application Study of Pig Iron lngot Molds [pp. 1431-1440]
Jye-Long Lee and Shen-Chih Lee

Defect Structures and Nonbasal Slip of C36 Laves Phase MgNi2 in a Two-Phase Alloy [pp. 1441-1447]
Yaping Liu, James D. Livingston, and Samuel M. Allen

Application of Image Analysis for Characterization of Spatial Arrangements of Features in Microstructure [pp. 1449-1456]
Pascal Louis and Arun M. Gokhale

Internal Friction in AlCu-Al2O3 Metal-Matrix Composites [pp. 1457-1460]
L. Parrini and R. Schaller

Nanometer-Scale Crack Initiation and Propagation Behavior of Fe3Al-Based Intermetallic Alloy [pp. 1461-1469]
L.J. Qiao, X. Mao, and C.Z. Chen

Elevated Temperature Creep and Fracture Properties of the 62Cu-35Au-3Ni Braze Alloy [pp. 1471-1482]
J.J. Stephens and F.A. Greulich

A Comparison of Shear Localization Susceptibility in U-0.75 Wt Pct Ti and W-Ni-Fe during High Strain Rate Deformation [pp. 1483-1490]
Anna K. Zurek and Paul S. Follansbee

Communication: Development of High-Strength Aluminum Alloys by Mesoscopic Structure Control [pp. 1597-1599]
Kozo Osamura, Osamu Kubota, Parsons Promstit, Hiroshi Okuda, Shojiro Ochiai, Kazuo Fujii, Jun Kusui, Takamasa Yokote, and Kohei Kubo

Communication: Discussion of "Effect of Fe on the Superplastic Deformation of Zn-22 Pct Al" [pp. 1600-1601]
Nai-Yong Tang

Communication: Authors' Reply [pp. 1601-1602]
Farghalli A. Mohamed and Prabir K. Chaudhury

Physical Chemistry

Infiltration and Wetting of Alumina Particulate Preforms by Aluminum and Aluminum-Magnesium Alloys [pp. 1491-1497]
Tamala R. Jonas, James A. Cornie, and Kenneth C. Russell

Welding and Joining

Chemical Thermodynamics as a Predictive Tool in the Reactive Metal Brazing of Ceramics [pp. 1499-1505]
G. Wang and J.J. Lannutti

Surface Treatment

Effects of Laser-Shock Processing on the Microstructure and Surface Mechanical Properties of Hadfield Manganese Steel [pp. 1507-1517]
J.P. Chu, J.M. Rigsbee, G. Banas, F.V. Lawrence, and H.E. Elsayed-Ali

Microstructural Study of the Interface in Laser-Clad Ni-Al Bronze on Al Alloy AA333 and Its Relation to Cracking [pp. 1519-1533]
Y. Liu, J. Mazumder, and K. Shibata

Communication: The Effect of Phosphorus in Base Steel on the Forming Characteristics of Galvannealed Sheet Steels: New Average Iron Content Range of Galvannealed IFP Steel [pp. 1602-1605]
C.S. Lin and M. Meshii

Electronic, Magnetic, and Optical Material

Magnetic Anisotropy Predictions from Texture Measurements Using a Selected-Depth Technique [pp. 1535-1542]
J.P. Anderson

Solidification

Grain Texture Evolution during the Columnar Growth of Dendritic Alloys [pp. 1543-1551]
Ch.-A. Gandin, M. Rappaz, D. West, and B.L. Adams

Effect of Silicon Particles on the Fatigue Crack Growth Characteristics of Al-12 Wt Pct Si-0.35 Wt Pct Mg-(0 to 0.02) Wt Pct Sr Casting Alloys [pp. 1553-1570]
F.T. Lee, J.F. Major, and F.H. Samuel

The Characterization of the Al-12 Wt Pct Si Flake Powder Produced by a Double-Disk Process [pp. 1571-1581]
Kuang-Yuan Shue and Jien-Wei Yeh

Theory of Layered-Structure Formation in Peritectic Systems [pp. 1583-1590]
R. Trivedi

Other

Correction [p. 1607]

Contents, Metallurgical and Materials Transactions B, Volume 26B, June 1995


Direct questions about this or any other Metallurgical and Materials Transactions page to mettrans@andrew.cmu.edu.

Search TMS Document Center Tables of Contents Subscriptions Met. and Mat. Trans. TMS OnLine