METALLURGICAL AND MATERIALS TRANSACTIONS A
	TABLE OF CONTENTS Volume 26A, No. 8, August 1995 This Month Featuring: The 1994 Institute of Metals Lecture; Alloy Phases; Transformations; Mechanical Behavior; Welding and Joining; Surface Treatment; Solidification; Composite Materials. View August 1995 Abstracts.

The 1994 Institute of Metals Lecture

Alloy Phases

Quantification of the Mg2Si " and ' Phases in AlMgSi Alloys by Transmission Electron Microscopy

Structural Evolution in Mechanically Alloyed Al-Fe Powders [pp. 1939-1946]
D.K. Mukhopadhyay, C. Suryanarayana, and F.H. (Sam) Froes

The Intergranular Microstructure of Cast Mg-Zn and Mg-Zn-Rare Earth Alloys [pp. 1947-1955]
L.Y. Wei, G.L. Dunlop, and H. Westengen

Transformations

Atomic Structure of Interphase Boundary Enclosing Bcc Precipitate Formed in Fcc Matrix in a Ni-Cr Alloy [pp. 1971-1978]
T. Furuhara, K. Wada, and T. Maki

Effects of Self-Accommodation and Plastic Accommodation in Martensitic Transformations and Morphology of Martensites [pp. 1979-1985]
Nanju Gu, Xiaoyan Song, Jianxin Zhang, Fuxing Yin, and Ruixiang Wang

Predicting the Onset of Transformation under Noncontinuous Cooling Conditions: Part I. Theory [pp. 1987-1992]
T.T. Pham, E.B. Hawbolt, and J.K. Brimacombe

Predicting the Onset of Transformation under Noncontinuous Cooling Conditions: Part II. Application to the Austenite Pearlite Transformation [pp. 1993-2000]
T.T. Pham, E.B. Hawbolt, and J.K. Brimacombe

Electron Diffraction Study of Aging Processes in Fe-1.83 Wt Pct C Martensite at Room Temperature [pp. 2001-2005]
S.B. Ren, T. Tadaki, K. Shimizu, and X.T. Wang

Numerical Modeling of Diffusion-Controlled Phase Transformations in Ternary Systems and Application to the Ferrite/Austenite Transformation in the Fe-Cr-Ni System [pp. 2007-2025]
J.M. Vitek, S.A. Vitek, and S.A. David

Communication: The Effect of Annealing Temperature on the Recrystallization Kinetics of Commercially Pure Aluminum [pp. 2185-2187]
N.H. Lin, C.P. Chang, and P.W. Kao

Mechanical Behavior

Viscoelastic Spectra of Cd_0.67Mg_0.33 in Torsion and Bending [pp. 2035-2039]
L. Steven Cook and Roderic S. Lakes

Modeling the Hot Consolidation of Ceramic and Metal Powders [pp. 2041-2051]
R.E. Dutton, S. Shamasundar, and S.L. Semiatin

Analysis of Steady-State Creep and Creep Fracture of Directionally Solidified Eutectic /- Alloy [pp. 2053-2062]
J. Lapin and F. Delannay

Initiation and Growth of Small Fatigue Cracks in a Ni-Base Superalloy [pp. 2063-2073]
Z. Mei, C.R. Krenn, and J.W. Morris, Jr.

A Simple Technique to Generate In-Plane Forming Limit Curves and Selected Applications [pp. 2075-2084]
K.S. Raghavan

Mechanical Properties of Isothermally Aged High-Nitrogen Stainless Steel [pp. 2085-2101]
John W. Simmons

The Influence of the Sulfur/Oxygen Ratio in the Environment on the Creep and Creep Damage Behavior of a Heat-Resistant Steel [pp. 2103-2110]
M.F. Stroosnijder, V. Guttmann, and J.H.W. de Wit

Forming Properties and Springback Evaluation of Copper Beryllium Sheets [pp. 2111-2121]
A.A. Tseng, K.P. Jen, T.C. Chen, R. Kondetimmamhalli, and Y.V. Murty

Communication: Mechanical Properties of Molybdenum Alloyed Liquid Phase-Sintered Tungsten-Based Composites [pp. 2187-2189]
Preston B. Kemp and Randall M. German

Welding and Joining

Surface Treatment

Solidification

Pressureless Infiltration of Aluminum Metal-Matrix Composites [pp. 2155-2159]
Y. Kajikawa, T. Nukami, and M. C. Flemings

Composite Materials

Influence of Cr and W Alloying on the Fiber-Matrix lnterfacial Shear Strength in Cast and Directionally Solidified Sapphire NiAl Composites [pp. 2175-2184]
R. Asthana, R. Tiwari, and S.N. Tewari

Other