METALLURGICAL AND MATERIALS TRANSACTIONS A | |
---|---|
![]() |
|
Volume 26A, No. 10, October 1995 This Month Featuring: Symposium on Dynamic Behavior of Materials: Part I; Alloy Phases; Transformations; Mechanical Behavior; Electronic, Magnetic and Optical Material; Materials Processing; and Composite Materials.
|
Densification Behavior of Dynamically Shock Compacted Ceramic Powder [pp. 2503-2509]
John Freim, J. McKittrick, and W.J. Nellis
The Structure of Controlled Shear Bands in Dynamically Deformed Reactive Mixtures [pp. 2521-2519]
V.F. Nesterenko, M.A. Meyers, H.C. Chen, and J.C. LaSalvia
Strength and Ductility under Dynamic Loading in Fine-Grained IN905XL Aluminum Alloy [pp. 2493-2526]
Toshiji Mukai, Koichi Ishikawa, and Kenji Higashi
Dynamic Fracture Toughness of 4340 VAR Steel Under Conditions of Plane Strain [pp. 2527-2543]
Youngseog Lee and Vikas Prakash
Shock-Loading Response of 6061-T6 Aluminum Metal-Matrix Composites [pp. 2545-2553]
Kenneth S. Vecchio and George T. Gray III
Influence of Peak Pressure and Temperature on the Structure/Property Response of Shock-Loaded Ta and Ta-10W [pp. 2555-2563]
George T. Gray III and Kenneth S. Vecchio
Shock Consolidation of Mechanically Alloyed Amorphous Ti-Si Powders [pp. 2565-2569]
S.C. Glade and N.N. Thadhani
Dynamic Consolidation of Metastable Nanocrystalline Powders [pp. 2571-2578]
G.E. Korth and R.L. Williamson
Mechanical Properties of Isothermally Aged High-Nitrogen Stainless Steel [pp. 2579-2595]
John W. Simmons
Effects of Tensile Stress on Microstructural Change of Eutectoid Zn-Al Alloy [pp. 2611-2615]
Yao Hua Zhu and Eligio Orozco
Communication: Microstructural Stability of the (+
) Solution-Treated and Quenched Near-
Titanium Alloy Ti-5.8Al-4Sn-3.5Zr-0.70Nb-0.5Mo-0.35Si-0.06C [pp. 2751-2755]
Partha Ghosal, Rajesh Prasad, and C. Ramachandra
Interfacial Reactions in Al-Mg (5083)/Al2O3p Composites During Fabrication and Remelting [pp. 2625-2635]
W.M. Zhong, G. L'Espérance, and M. Suéry
Interfacial Reactions in Al-Mg (5083)/SiCp Composites During Fabrication and Remelting [pp. 2637-2649]
W.M. Zhong, G. L'Espérance, and M. Suéry
Communication: Direct Evidence for Combustion Reaction on TiNi/TiC Composites Formation by Mechanical Alloying [pp. 2651-2663]
J.Y. Huang, L.L. Ye, Y.K. Wu, and H.Q. Ye
Influence of Temperature and Strain Rate on Slip and Twinning Behavior of Zr [pp. 2665-2675]
S.G. Song and G.T. Gray III
Constitutive Modeling for CdTe Single Crystals [pp. 2687-2697]
J.C. Moosbrugger and A. Levy
Evolution of Microstructure during Fabrication of Zr-2.5 Wt pct Nb Alloy Pressure Tubes [pp. 2707-2718]
D. Srivastava, G.K. Dey, and S. Banerjee
Communication: Intermetallic Sheets Synthesized from Elemental Ti, Al, and Nb Foils [pp. 2759-2763]
D.E. Alman and C.P. Dogan
The Transverse Creep Deformation and Failure Characteristics of SCS-6/Ti-6Al-4V Metal Matrix Composites at 482°C [pp. 2733-2744]
M.R. Eggleston and A.M. Ritter
Anelastic Relaxation in Al-4 Wt Pct Cu-Al2O3 Fiber-Reinforced Composites [pp. 2745-2749]
Stefano Sgobba, Lorenzo Parrini, Hans-Ulrich Künzi, and Bernhard Ilschner
Search | TMS Document Center | Tables of Contents | Subscriptions | Met. and Mat. Trans. | TMS OnLine |
---|