METALLURGICAL AND MATERIALS TRANSACTIONS A
	TABLE OF CONTENTS Volume 26A, No. 12, December 1995 This Month Featuring: The 1994 Edward DeMille Campbell Memorial Lecture; Symposium on Creep and Fatigue of Metal Matrix Composites; Welding and Joining. View December 1995 Abstracts.

The 1994 Edward DeMille Campbell Memorial Lecture

Symposium of Creep and Fatigue of Metal Matrix Composites

A Finite Element Model of the Effects of Primary Creep in an Al-SiC Metal Matrix Composite [pp. 3067-3079]
Steven L. Atkins and Jeffrey C. Gibeling

Micromechanics Effects in Creep of Metal-Matrix Composites [pp. 3081-3089]
L.C. Davis, and J.E. Allison

An Approach to the Design of Composites for Service at Elevated and Nonsteady Temperatures [pp. 3091-3105]
Karim F. Elfishawy and Glenn S. Daehn

The Effect of Particle Reinforcement on the Creep Behavior of Single-Phase Aluminum [pp. 3107-3118]
P.E. Krajewski, J.W. Jones, and J.E. Allison

Creep Strengthening in a Discontinuous SiC-Al Composite [pp. 3119-3129]
Kyung-Tae Park and Farghalli A. Mohamed

Mechanical Behavior and Failure Micromechanics of Al/Al₂O₃ Composites under Cyclic Deformation [pp. 3131-3141]
P. Poza and J. Llorca

The Effect of Matrix Microstructure on Cyclic Response and Fatigue Behavior of Particle-Reinforced 2219 Aluminum: Part I. Room Temperature Behavior [pp. 3143-3154]
G.M. Vyletel, J.E. Allison, and D.C. Van Aken

The Effect of Matrix Microstructure on Cyclic Response and Fatigue Behavior of Particle-Reinforced 2219 Aluminum: Part II. Behavior at 150°C [pp. 3155-3162]
G.M. Vyletel, D.C. Van Aken, and J.E. Allison

Comparison of the Growth of Individual and Average Microcracks in the Fatigue of Al-SiC Composites [pp. 3163-3176]
E.Y. Chen, L. Lawson, and M. Meshii

Short Crack Growth Behavior in a Particulate-Reinforced Aluminum Alloy Composite [pp. 3177-3182]
Chingshen Li and F. Ellyin

Acoustic Emission during Fatigue Crack Propagation in SiC Particle Reinforced Al Matrix Composites [pp. 3183-3189]
A. Niklas, L. Froyen, M. Wevers, and L. Delaey

Effect of Thermal Residual Stresses on Fatigue Crack Opening and Propagation Behavior in an Al/SiCp Metal Matrix Composite [pp. 3191-3198]
M.E. Fitzpatrick, M.T. Hutchings, J.E. King, D.M. Knowles, and P.J. Withers

Fatigue Crack Growth Behavior of Composites [pp. 3199-3210]
A.K. Vasudevan and K. Sadananda

An Evaluation of Fiber-Reinforced Titanium Matrix Composites for Advanced High-Temperature Aerospace Applications [pp. 3211-3223]
James M. Larsen, Stephan M. Russ, and J.W. Jones

Materials Characterization of Silicon Carbide Reinforced Titanium (Ti/SCS-6) Metal Matrix Composites: Part I. Tensile and Fatigue Behavior [pp. 3225-3247]
P.K. Liaw, E.S. Diaz, K.T. Chiang, and D.H. Loh

Materials Characterization of Silicon Carbide Reinforced Titanium (Ti/SCS-6) Metal Matrix Composites: Part II. Theoretical Modeling of Fatigue Behavior [pp. 3249-3255]
K.T. Chiang, D.H. Loh, P.K. Liaw, and E.S. Diaz

Modeling the Minimum Creep Rate of Discontinuous Lamellar-Reinforced Composites [pp. 3257-3264]
Michael F. Bartholomeusz and John A. Wert

Creep-Fatige Life Prediction of In Situ Composite Solders [pp. 3265-3275]
C.G. Kuo, S.M.. Sastry, and K.L. Jerina

Welding and Joining