Met and Mat Trans Contents A: January 1996

METALLURGICAL AND MATERIALS TRANSACTIONS A

TABLE OF CONTENTS Volume 27A, No. 1, January 1996 This Month Featuring: Alloy Phases; Transformations; Transport Phenomena; Mechanical Behavior; Surface Treatment; Solidification; Materials Processing; Composite Materials. View January 1996 Abstracts.

METALLURGICAL AND MATERIALS TRANSACTIONS A

TABLE OF CONTENTS
Volume 27A, No. 1, January 1996

This Month Featuring: Alloy Phases; Transformations; Transport Phenomena; Mechanical Behavior; Surface Treatment; Solidification; Materials Processing; Composite Materials. View January 1996 Abstracts.

Alloy Phases

Evolution of Microstructures in the Nickel Modified Titanium Trialuminides Near the L1₂ Phase Field [pp. 5-17]
S. Biswas and R.A. Varin

The Effect of Iron and Manganese on the Recrystallization Behavior of Hot-Rolled and Solution-Heat-Treated Aluminum Alloy 6013 [pp. 19-27]
Richard A. Jeniski, Jr., Buncha Thanaboonsombut, and T.H. Sanders, Jr.

Transformations

Hydride Formation and Decomposition in Electrolytically Charged Metastable Austenitic Stainless Steels [pp. 29-40]
Shuchun Chen, Ming Gao, and Robert P. Wei

Mechanical Alloying of Nb-Al Powders [pp. 41-48]
Zhixue Peng, C. Suryanarayana, and F.H. (Sam) Froes

Experimental Investigation of the Transformation Texture in Hot-Rolled Ferritic Stainless Steel Using Single Orientation Determination [pp. 49-57]
D. Raabe and M. Ylitalo

Transport Phenomena

High-Temperature Nitridation of Ni-Cr Alloys [pp. 59-69]
A.A. Kodentsov, J.H. Gülpen, C. Cserháti, J.K. Kivilahti, and F.J.J. Van Loo

Mechanical Behavior

Mechanical Behavior of the In Situ Composite Alloys in the Al-Ni-Ti System Near the L1₂ Phase Field [pp. 71-79]
S. Biswas and R.A. Varin

Non-Schmid Effects on the Behavior of Polycrystals-with Applications to Ni₃Al [pp. 81-99]
Ming Dao, Bing Jean Lee, and Robert J. Asaro

The Effect of Hydrogen on the Fracture of Alloy X-750 [pp. 101-110]
Douglas M. Symons and Anthony W. Thompson

Pearlite in Ultrahigh Carbon Steels: Heat Treatments and Mechanical Properties [pp. 111-118]
Eric M. Taleff, Chol K. Syn, Donald R. Lesuer, and Oleg D. Sherby

Optimization of Cold and Warm Workability in 304 Stainless Steel Using Instability Maps [pp. 119-126]
S. Venugopal, S.L. Mannan, and Y.V.R.K. Prasad

Effect of Creep Strain on Microstructural Stability and Creep Resistance of a TiAl/Ti₃Al Lamellar Alloy [pp. 127-134]
J.A. Wert and M.F. Bartholomeusz

Surface Treatment

Surface Morphology and Compound Layer Pores of Plasma Nitrocarburized Low Carbon Steel [pp. 135-143]
Shi Li and Rafael R. Manory

Solidification

Communication: Mechanical Deformation of Dendrites by Fluid Flow [pp. 229-232]
J. Pilling and A. Hellawell

Materials Processing

The Effect of Thermal Cycle on the Microstructural Development of a Powder Metallurgy Superalloy Braze Material [pp. 145-153]
R.G. Iacocca

Modeling Texture Change during the Static Recrystallization of Interstitial Free Steels [pp. 155-164]
L. Kestens and J.J. Jonas

Communication: Modeling of Dynamic Material Behavior: A Critical Evaluation of the Dissipator Power Co-content Approach [pp. 232-235]
F. Montheillet, J.J. Jonas, and K.W. Neale

Communication: Author's Reply [pp. 235-236]
Y.V.R.K. Prasad

Composite Materials

Effective Elastic Moduli of Fiber-Matrix Interphases in High-Temperature Composites [pp. 165-182]
Y.C. Chu and S.I. Rokhlin

NiTi and NiTi-TiC Composites: Part II. Compressive Mechanical Properties [pp. 183-191]
K.L. Fukami-Ushiro, D. Mari, and D.C. Dunand

NiTi and NiTi-TiC Composites: Part III. Shape-Memory Recovery [pp. 193-203]
K.L. Fukami-Ushiro and D.C. Dunand

Subcritical Crack Growth at Bimaterial Interfaces: Part I. Flexural Peel Technique [pp. 205-211]
Zhehua Zhang and J.K. Shang

Subcritical Crack Growth at Bimaterial Interfaces: Part II. Microstructural Effects on Fracture Resistance of Metal/Ceramic Interfaces [pp. 213-219]
Gang Liu and J.K. Shang

Subcritical Crack Growth at Bimaterial Interfaces: Part III. Shear-Enhanced Fatigue Crack Growth Resistance at Polymer/Metal Interface [pp. 221-228]
Zhehua Zhang and J.K. Shang

Communication: On the In Situ Formation of TiC and Ti₂C Reinforcements in Combustion-Assisted Synthesis of Titanium Matrix Composites [pp. 237-240]
S. Ranganath and J. Subrahmanyam

Direct questions about this or any other Metallurgical and Materials Transactions page to mettrans@andrew.cmu.edu.

Search TMS Document Center Tables of Contents Subscriptions Met. and Mat. Trans. TMS OnLine