METALLURGICAL AND MATERIALS TRANSACTIONS A
	TABLE OF CONTENTS Volume 27A, No. 3, March 1996 This Month Featuring: The 1995 Institute of Metals Lecture and Robert Franklin Mehl Award; Symposium on Analysis and Modeling of Solidification; Transformation; Transport Phenomena; Mechanical Behavior; Welding & Joining; Solidification; Composite Materials. View March 1996 Abstracts.

The 1995 Institute of Metals Lecture and Robert Franklin Mehl Award

Symposium on Analysis and Modeling of Solidification

Nucleation-Controlled Solidification Kinetics [pp. 533-547]
J.H. Perepezko and M.J. Uttormark

Crystallization of Amorphous Alloys [pp. 549-555]
A.L. Greer

Overview of Geometric Effects on Coarsening of Mushy Zones [pp. 557-567]
S.P. Marsh and M.E. Glicksman

Some Consequences of Thermosolutal Convection: The Grain Structure of Castings [pp. 569-581]
G. Hansen, A. Hellawell, S.Z. Lu, and R.S. Steube

Effects of Flow on Morphological Stability During Directional Solidification [pp. 583-593]
S.H. Davis and T.P. Schulze

Solidification of Binary Hypoeutectic Alloy Matrix Composite Castings [pp. 595-609]
Andreas Mortensen and Merton C. Flemings

Numerical Modeling of Cellular/Dendritic Array Growth: Spacing and Structure Predictions [pp. 611-623]
J.D. Hunt and S.-Z. Lu

Banded Solidification Microstructures [pp. 625-634]
W. Kurz and R. Trivedi

Morphological Instabilities of Lamellar Eutectics [pp. 635-656]
Alain Karma and Armand Sarkissian

The Phase-Field Method: Simulation of Alloy Dendritic Solidification during Recalescence [pp. 657-669]
William J. Boettinger and James A. Warren

Interface Attachment Kinetics in Alloy Solidification [pp. 671-686]
Michael J. Aziz

Effects of Shear Flow and Anisotropic Kinetics on the Morphological Stability of a Binary Alloy [pp. 687-694]
S.R. Coriell, B.T. Murray, A.A. Chernov, and G.B. McFadden

Prediction of Grain Structures in Various Solidification Processes [pp. 695-705]
M. Rappaz, Ch.-A. Gandin, J.-L. Desbiolles, and Ph. Thévoz

An Adaptive Mesh Refinement Scheme for Solidification Problems [pp. 707-717]
Nagendra Palle and Jonathan A. Dantzig

Transformation

₁ Plates from the ₃ Phase in a Cu-Zn-Au Alloy

Transport Phenomena

Mechanical Behavior

Mechanical Behavior and Properties of Mechanically Alloyed Aluminum Alloys [pp. 737-745]
H.R. Last and R.K. Garrett, Jr.

Effect of Carbide Precipitation on the Creep Behavior of Alloy 800HT in the Temperature Range 700°C to 900°C [pp. 747-756]
E. El-Magd, G. Nicolini, and M. Farag

Effect of Thermal Cycling on the Mechanical Properties of 350-Grade Maraging Steel [pp. 757-761]
U.K. Viswanathan, R. Kishore, and M.K. Asundi

Communication: Discussion of "A Fully Plastic Microcracking Model for Transgranular Stress Corrosion Cracking in Planar Slip Materials" [pp. 819-820]
M.J. Kaufman

Communication: Author's Reply [pp. 820-821]

Welding & Joining

Analysis of Heat-Affected Zone Phase Transformations Using In Situ Spatially Resolved X-Ray Diffraction with Synchrotron Radiation [pp. 775-783]
J.W. Elmer, Joe Wong, M. Fröba, P.A. Waide, and E.M. Larson

Effect of Homogenization Heat Treatment on the Microstructure and Heat-Affected Zone Microfissuring in Welded Cast Alloy 718 [pp. 785-790]
Xiao Huang, M.C. Chaturvedi, and N.L. Richards

Influence of Chromium and Impurities on the Grain-Refining Behavior of Aluminum [pp. 791-800]
A. Arjuna Rao, B.S. Murty, and M. Chakraborty

Solidification

Composite Materials