Met and Mat Trans Contents A: May 1996

METALLURGICAL AND MATERIALS TRANSACTIONS A

TABLE OF CONTENTS Volume 27A, No. 5, May 1996 This Month Featuring: Transformations; Mechanical Behavior; Environment; Surface Treatment; Solidification; Materials Processing and Composite Materials. View May 1996 Abstracts.

METALLURGICAL AND MATERIALS TRANSACTIONS A

TABLE OF CONTENTS
Volume 27A, No. 5, May 1996

This Month Featuring: Transformations; Mechanical Behavior; Environment; Surface Treatment; Solidification; Materials Processing and Composite Materials. View May 1996 Abstracts.

Transformations

Bainitic Microstructures Formed by Split Isothermal Transformation in an Fe-C-Si-Mn-Mo Steel [pp. 1141-1147]
Ashraf Ali

Precipitation Behavior in a Medium Carbon, Ti-V-N Microalloyed Steel [pp. 1149-1165]
M. Prikryl, A. Kroupa, G.C. Weatherly, and S.V. Subramanian

Microstructural Stability on Aging of an + Titanium Alloy: Ti-6Al-1.6Zr-3.3Mo-0.30Si [pp. 1167-1173]
A.K. Singh, T. Roy, and C. Ramachandra

Electron Microscopic Study of Cr₂N Formation in Thermally Aged 316LN Austenitic Stainless Steels [pp. 1175-1186]
D. Sundararaman, P. Shankar and V.S. Raghunathan

Computer Simulation of Reversible Martensitic Transformations [pp. 1187-1201]
Ping Xu and J.W. Morris, Jr.

A Comprehensive Dynamical Study of Nucleation and Growth in a One-Dimensional Shear Martensitic Transition [pp. 1203-1216]
B.P. Van Zyl and R.J. Gooding

Mechanical Behavior

Creep Deformation of Dispersion-Strengthened Copper [pp. 1217-1227]
S.E. Broyles, K.R. Anderson, J.R. Groza, and J.C. Gibeling

High-Temperature Deformation Properties of NiAl Single Crystals [pp. 1229-1240]
K.R. Forbes, U. Glatzel, R. Darolia, and W.D. Nix

Analysis and Prevention of Vertical Cracking Phenomena During Deep Drawing of Hot-Rolled SG295 Steel Strips [pp. 1241-1250]
Sunghak Lee, Chang Gil Lee, Dongil Kwon, Sung-Ho Park, and Nack J. Kim

Flow Stress and Microstructural Evolution During Hot Working of Alloy 22Cr-13Ni-5Mn-0.3N Austenitic Stainless Steel [pp. 1251-1266]
M.C. Mataya, C.A. Perkins, S.W. Thompson, and D.K. Matlock

Prediction of Fatigue Crack Formation in 304 Stainless Steel [pp. 1267-1271]
Shaun M. McGuire and Morris E. Fine

The Normalized Coffin-Manson Plot in Terms of a New Damage Function Based on Grain Boundary Cavitation Under Creep-Fatigue Condition [pp. 1273-1281]
Soo Woo Nam, Young Cheol Yoon, Baig Gyu Choi, Je Min Lee, and Jin Wan Hong

A Study of the Influence of Mischmetal Additions to Al-7Si-0.3Mg (LM 25/356) Alloy [pp. 1283-1292]
M. Ravi, U.T.S. Pillai, B.C. Pai, A.D. Damodaran, and E.S. Dwarakadasa

Effect of Strontium Modification on Near-Threshold Fatigue Crack Growth in an Al-Si-Cu Die Cast Alloy [pp. 1293-1302]
M. Schaefer and R.A. Fournelle

Effect of Strain Rate and Temperature on the Flow Stress of -Phase Titanium-Hydrogen Alloys [pp. 1303-1312]
O.N. Senkov and J.J. Jonas

Communication: Mechanical Properties of Ru-Ni-Al Alloys [pp. 1395-1400]
I.M. Wolff and G. Sauthoff

Communication: On Microsuperplasticity in AA7475 Domes [pp. 1400-1403]
M.G. Zelin

Environment

Studies on the Influence of Metallurgical Variables on the Stress Corrosion Behavior of AISI 304 Stainless Steel in Sodium Chloride Solution Using the Fracture Mechanics Approach [pp. 1313-1325]
H.S. Khatak, J.B. Gnanamoorthy, and P. Rodriguez

Stress Corrosion Cracking of Pressure Vessel Steels in High-Temperature Caustic Aluminate Solutions [pp. 1327-1331]
Su'e Liu, Ziyong Zhu, Hui Guan, and Wei Ke

Surface Treatment

Corrosion Fatigue in Nitrocarburized Quenched and Tempered Steels [pp. 1333-1346]
M. Karim Khani and D. Dengel

Transmission Electron Microscopy Study on the Cross-Sectional Microstructure of an Ion-Nitriding Layer [pp. 1347-1352]
Xiaolei Xu, Liang Wang, Zhiwei Yu, and Zukun Hei

Solidification

Macrosegregation During Dendritic Arrayed Growth of Hypoeutectic Pb-Sn Alloys: Influence of Primary Arm Spacing and Mushy Zone Length [pp. 1353-1362]
S.N. Tewari and R. Shah

Materials Processing

Rapid Solidification Processing of a Mg-Li-Si-Ag Alloy [pp. 1363-1370]
A. Matsuda, C.C. Wan, J.-M. Yang, and W.H. Kao

Tensile Properties of Mechanically Alloyed/Milled ODS-Ni-Based Alloys [pp. 1371-1377]
J. Zbiral

Composite Materials

Interface Characterization of Ceramic Fiber-Reinforced Ti Alloy Composites Manufactured by Infrared Processing [pp. 1379-1394]
S.G. Warrier, S.H. Chen, S.K. Wu, and R.Y. Lin

Communication: Thermal Stability of SiC-SCS-6 Fiber-Reinforced IMI834 Alloys [pp. 1403-1405]
H.J. Dudek, R. Leucht, and J. Hemptenmacher

Direct questions about this or any other Metallurgical and Materials Transactions page to mettrans@andrew.cmu.edu.

Search TMS Document Center Tables of Contents Subscriptions Met. and Mat. Trans. TMS OnLine