Met and Mat Trans Contents A: September 1996

METALLURGICAL AND MATERIALS TRANSACTIONS A

TABLE OF CONTENTS Volume 27A, No. 9, September 1996 This Month Featuring: The 1996 Institute of Metals and Mehl Award Lecture; Alloy Phases; Transformations; Transport Phenomena; Mechanical Behavior; Physical Chemistry; Environment; Welding & Joining; Electronic, Magnetic, & Optical Material; Solidification; Materials Processing; Composite Materials. View September 1996 Abstracts.

METALLURGICAL AND MATERIALS TRANSACTIONS A

TABLE OF CONTENTS
Volume 27A, No. 9, September 1996

This Month Featuring: The 1996 Institute of Metals and Mehl Award Lecture; Alloy Phases; Transformations; Transport Phenomena; Mechanical Behavior; Physical Chemistry; Environment; Welding & Joining; Electronic, Magnetic, & Optical Material; Solidification; Materials Processing; Composite Materials. View September 1996 Abstracts.

The 1996 Institute of Metals and Mehl Award Lecture

Phase Transformations in Condensed Systems Revisited: Industrial Applications [pp. 2397-2418]
Morris E. Fine

Alloy Phases

Thermodynamic Studies and the Phase Diagram of the Li-Mg System [pp. 2419-2428]
W. Gasior, Z. Moser, W. Zakulski, and G. Schwitzgebel

Experimental Study of the Phase Equilibria in the Fe-Mn-Al System [pp. 2429-2435]
Xing Jun Liu, Shi Ming Hao, Le Ying Xu, Yang Feng Guo, and Hui Chen

Retardation of Intermetallic Phase Formation in Experimental Superferritic Stainless Steels [pp. 2436-2444]
S. Nana and M.B. Cortie

Communication: The Dependence of Complex Alloyed Steel Properties on Quenching and Tempering Conditions [pp. 2852-2858]
Bertold B. Vinokur, Alexandr Vinokur, and Victoriya E. Shtessel

Transformations

Effect of Alloying Elements on Martensitic Transformation in the Binary NiAl() Phase Alloys [pp. 2445-2453]
R. Kainuma, H. Ohtani, and K. Ishida

Effects of Low-Temperature Aging on the Microstructure and Soft Magnetic Properties of Rapidly Quenched Fe-Si-B Alloys [pp. 2454-2460]
T. Naohara

Annealing and Aging of Interstitial C in -Fe, As Measured By Internal Friction [pp. 2461-2469]
Wilson Pascheto and G.P. Johari

Ostwald Ripening of Solid-Liquid Pb-Sn Dispersions [pp. 2470-2478]
I. Seyhan, L. Ratke, W. Bender, and P.W. Voorhees

Precipitation Behaviors in Al-Cu-Mg and 2024 Aluminum Alloys [pp. 2479-2494]
Han-Cheng Shih, New-Jin Ho, and J.C. Huang

Communication: The Effect of Substrate Constraint on the Martensitic Transformation of Ni-Ti Thin Films [pp. 2858-2860]
S.A. Mathews, Manfred Wuttig, and Quanmin Su

Transport Phenomena

Hydrogen Trapping and Permeation in Nickel Thoria [pp. 2495-2503]
A.K. Altunoglu and N.St.J. Braithwaite

Average Effective Interdiffusion Coefficients and the Matano Plane Composition [pp. 2504-2509]
M.A. Dayananda

Mechanical Behavior

Microstructural Basis for the Effect of Chromium on the Strength and Toughness of AF1410-Based High Performance Steels [pp. 2510-2517]
Raghavan Ayer and P.M. Machmeier

The Fracture Toughness of Niobium-Based, In Situ Composites [pp. 2518-2531]
Kwai S. Chan

A Model Study of Cavity Growth in Superplasticity Using Single Premachined Holes [pp. 2532-2539]
Atul H. Chokshi and Terence G. Langdon

Cu-Bearing High-Strength Low-Alloy Steels: The Influence of Microstructure on the Initiation and Growth of Small Fatigue Cracks [pp. 2540-2556]
D.L. Davidson, K.S. Chan, and R.C. McClung

High Cycle Fatigue Behavior of Gas-Carburized Medium Carbon Cr-Mo Steel [pp. 2557-2564]
Hyung-Jun Kim and Young-Gak Kweon

Analysis of Damping in Particle-Reinforced Superplastic Zinc Composites [pp. 2565-2573]
Junsheng Lu and David C. Van Aken

Microstructures Relevant to Brittle Fracture Initiation at the Heat-Affected Zone of Weldment of a Low Carbon Steel [pp. 2574-2582]
Kenji Ohya, Jongseop Kim, Ken'ichi Yokoyama, and Michihiko Nagumo

Microstructure and Mechanical Behavior of Cr-Cr₂Hf In Situ Intermetallic Composites [pp. 2583-2592]
K.S. Ravichandran, D.B. Miracle, and M.G. Mendiratta

High-Temperature Deformation Processing of Ti-24Al-20Nb [pp. 2593-2604]
P.K. Sagar, D. Banerjee, K. Muraleedharan, and Y.V.R.K. Prasad

Forming of Tailor-Welded Blanks [pp. 2605-2616]
F.I. Saunders and R.H. Wagoner

Atmospheric Stress Corrosion Cracking of a Superplastic 7475 Aluminum Alloy [pp. 2617-2627]
T.C. Tsai and T.H. Chuang

Elevated Temperature Compressive Properties of Zr-Modified NiAl [pp. 2628-2643]
J. Daniel Whittenberger and R.D. Noebe

High-Temperature Behavior of Precious Metal Base Composites [pp. 2642-2652]
I.M. Wolff and G. Sauthoff

Corrosive Wear of SiC Whisker- and Particulate-Reinforced 6061 Aluminum Alloy Composites [pp. 2653-2662]
S.Y. Yu, H. Ishii, and T.H. Chuang

Effects of Nitrogen Implantation on Low Cycle Fatigue Behavior of Ferritic Fe-24Cr-4Al Stainless Alloy [pp. 2663-2672]
S.M. Zhu and S.C. Tjong

Physical Chemistry

Thermodynamic Activities and Phase Boundaries for the Alloys of the Ni₃Al-Ni₃Ti Pseudobinary Section in the Ni-Al-Ti System [pp. 2673-2677]
J. Kapala, D. Kath and K. Hilpert

Environment

The Influence of Aqueous Environments on Low K and High K Fatigue Crack Propagation Behavior in Low Carbon Structural Steels [pp. 2678-2685]
Masazumi Tanaka

Initiation of Stress Corrosion Cracking for Pipeline Steels in a Carbonate-Bicarbonate Solution [pp. 2686-2691]
Z.F. Wang and A. Atrens

Welding & Joining

Characterization of Constitutional Liquid Film Migration in Nickel-Base Alloy 718 [pp. 2692-2703]
V.L. Acoff and R.G. Thompson

Electronic, Magnetic, & Optical Material

Retrograde Solubility in Semiconductors [pp. 2704-2707]
Aindrea L. McKelvey

Solidification

A Model for Macrosegregation and Its Application to Al-Cu Castings [pp. 2708-2721]
S. Chang and D.M. Stefanescu

Determination of the Solidification Curves of Commercial Aluminum Alloys [pp. 2722-2726]
Sinn-Wen Chen and Shih-Chang Jeng

Orientation Dependence of Primary Dendrite Spacing [pp. 2727-2739]
Ch.-A. Gandin, M. Eshelman, and R. Trivedi

Transitions Between Type A Flake, Type D Flake, and Coral Graphite Eutectic Structures in Cast Irons [pp. 2740-2753]
J.S. Park and J.D. Verhoeven

Equiaxed Dendritic Solidification with Convection: Part I. Multiscale/Multiphase Modeling [pp. 2754-2764]
C.Y. Wang and C. Beckermann

Equiaxed Dendritic Solidification with Convection: Part II. Numerical Simulations for an Al-4 Wt Pct Cu Alloy [pp. 2765-2783]
C.Y. Wang and C. Beckermann

Equiaxed Dendritic Solidification with Convection: Part III. Comparisons with NH₄Cl-H₂O Experiments [pp. 2784-2795]
C. Beckermann and C.Y. Wang

Materials Processing

Active Wear and Failure Mechanisms of TiN-Coated High Speed Steel and TiN-Coated Cemented Carbide Tools When Machining Powder Metallurgically Made Stainless Steels [pp. 2796-2808]
Laizhu Jiang, Hannu H;auanninen, Jukka Paro, and Veijo Kauppinen

Abnormal Growth of Faceted (WC) Grains in a (Co) Liquid Matrix [pp. 2809-2819]
Young Joon Park, Nong Moon Hwang, and Duk Yong Yoon

Composite Materials

NiTi and NiTi-TiC Composites: Part IV. Neutron Diffraction Study of Twinning and Shape-Memory Recovery [pp. 2820-2836]
D.C. Dunand, D. Mari, M.A.M. Bourke, and J.A. Roberts

Tensile Ductility and Fracture of Superplastic Aluminum-SiC Composites Under Thermal Cycling Conditions [pp. 2837-2842]
Gaspar Gonz;aaalez-Doncel and Oleg D. Sherby

Observation of Short Fatigue Crack-Growth Process in SiC-Fiber-Reinforced Ti-15-3 Alloy Composite [pp. 2843-2851]
S.Q. Guo, Y. Kagawa, and K. Honda

Direct questions about this or any other Metallurgical and Materials Transactions page to mettrans@andrew.cmu.edu.

Search TMS Document Center Tables of Contents Subscriptions Met. and Mat. Trans. TMS OnLine