Met and Mat Trans Contents A: January 1997

METALLURGICAL AND MATERIALS TRANSACTIONS A

TABLE OF CONTENTS Volume 28A, No. 1, January 1997 This Month Featuring: Transformations; Mechanical Behavior; Physical Chemistry; Environment; Welding & Joining; Solidification; Materials Processing; Composite Materials. View January 1997 Abstracts.

METALLURGICAL AND MATERIALS TRANSACTIONS A

TABLE OF CONTENTS
Volume 28A, No. 1, January 1997

This Month Featuring: Transformations; Mechanical Behavior; Physical Chemistry; Environment; Welding & Joining; Solidification; Materials Processing; Composite Materials. View January 1997 Abstracts.

Transformations

Identification and Range Quantification of Steel Transformation Products by Transformation Kinetics [pp. 5-14]
L. Fang, W.E. Wood, and D.G. Atteridge

Simulation of Recrystallization Microstructuresand Textures: Effects of Preferential Growth [pp. 15-25]
D. Juul Jensen

Effect of Elastic Stress on Two-Phase Binary Diffusion Couples [pp. 27-38]
William C. Johnson

Diffusion Fields Associated with Size and Shape Coarsening of Oblate Spheroids [pp. 39-50]
Yiwen Mou and J.M. Howe

Study of the - Phase Transformations of a Ti-64 Sheet Induced from a High-Temperature State and a High-Temperature + State [pp. 51-61]
H. Moustahfid, N. Gey, M. Humbert, and M.J. Philippe

Formation of '' Iron Nitride in FeN Martensite: Nitrogen Vacancies, Iron-Atom Displacements, and Misfit-Strain Energy [pp. 63-77]
M.J. van Genderen, A. Böttger,and E.J. Mittemeijer

Mechanical Behavior

Fatigue and Fracture Behavior of a Fine-Grained Lamellar TiAl Alloy [pp. 79-90]
Kwai S. Chan and Donald S. Shih

Ultrasonic Backscattering in Duplex Microstructures: Theory and Application to Titanium Alloys [pp. 91-104]
Y.K. Han and R.B. Thompson

The Effect of Carbon on the Loss of Room-Temperature Damping Capacity in Copper-Manganese Alloys [pp. 105-112]
Shashi Laddha, David C. Van Aken, and Huh-Tswen Lin

Modeling the Mechanical Behavior of Tantalum [pp. 113-122]
Bing-Jean Lee, Kenneth S. Vecchio, Said Ahzi, and Scott Schoenfeld

Correlation of Microstructure and Fracture Toughness in Three High-Speed Steel Rolls [pp. 123-134]
Sunghak Lee, Kee-Sun Sohn, Chang Gil Lee, and Byung Il Jung

Room-Temperature Deformation Behavior of a Directionally Solidified (B2)-(Ni-Fe-Al) Intermetallic Alloy [pp. 135-147]
A. Misra, J.T. Kim, and R. Gibala

Effects of Crack Aspect Ratio on the Behavior of Small Surface Cracks in Fatigue: Part I. Simulation [pp. 149-156]
K.S. Ravichandran

Effects of Crack Aspect Ratio on the Behavior of Small Surface Cracks in Fatigue: Part II. Experiments on a Titanium (Ti-8Al) Alloy [pp. 157-169]
K.S. Ravichandran and J.M. Larsen

Tensile Flow and Work-Hardening Behaviorof a Ti-Modified Austenitic Stainless Steel [pp. 171-178]
P.V. Sivaprasad, S. Venugopal, and S. Venkadesan

The Effect of Hydrostatic Pressurizationon the Microhardness and Compressive Behavior of the Porous Mn-Modified LI₂ Titanium Trialuminide [pp. 179-186]
Z. Witczak and R.A. Varin

Physical Chemistry

Thermochemistry of Binary Alloys of Transition Metals: The Systems Me-Gd, Me-Ho, and Me-Lu (Me = Cu, Ag, and Au) [pp. 187-190]
K. Fitzner and O.J. Kleppa

Environment

Fracture Mechanics Approach to Hydrogen-Assisted Microdamage in Eutectoid Steel [pp. 191-197]
J. Toribio

Welding & Joining

Weldability and Toughness Assessment of Ti-Microalloyed Offshore Steel [pp. 199-206]
I. Rak V. Gliha, and M. Koçak

Solidification

Electron Backscattered Diffraction Investigation of the Texture of Feathery Crystals in Aluminum Alloys [pp. 207-213]
S. Henry, P. Jarry, P.-H. Jouneau, and M. Rappaz

Materials Processing

Gravitational Effects on Grain Coarsening during Liquid-Phase Sintering [pp. 215-221]
Randall M. German, Yixiong Liu, and Anthony Griffo

Effect of Cu Addition on Consolidating Ti₅Si₃by the Elemental Powder-Metallurgical Method [pp. 223-228]
K.J. Park, J.K. Hong, and S.K. Hwang

Analysis of Orientation Clustering in a Directionally Solidified Nickel-Based Ingot [pp. 229-236]
David A. West and Brent L. Adams

Composite Materials

A Synchrotron X-ray Diffraction Study of the Local Residual Strains around a Single Inclusion in an Al/W Metal-Matrix Composite [pp. 237-243]
Henning F. Poulsen, Torben Lorentzen, Robert Feidenhans'l, and Yi-Lin Liu

Friction and Abrasion Resistance of Cast Aluminum Alloy-Fly Ash Composites [pp. 245-250]
P.K. Rohatgi, R.Q. Guo, P. Huang and S. Ray

Direct questions about this or any other Metallurgical and Materials Transactions page to mettrans@andrew.cmu.edu.

Search TMS Document Center Tables of Contents Subscriptions Met. and Mat. Trans. TMS OnLine