Met and Mat Trans Contents A: February 1997

METALLURGICAL AND MATERIALS TRANSACTIONS A

TABLE OF CONTENTS Volume 28A, No. 2, February 1997 This Month Featuring: Alloy Phases; Transformations; Transport Phenomena; Mechanical Behavior; Environment; Electronic, Magnetic and Optical Material; Solidification; Materials Processing; and Composite Materials. View February 1997 Abstracts.

METALLURGICAL AND MATERIALS TRANSACTIONS A

TABLE OF CONTENTS
Volume 28A, No. 2, February 1997

This Month Featuring: Alloy Phases; Transformations; Transport Phenomena; Mechanical Behavior; Environment; Electronic, Magnetic and Optical Material; Solidification; Materials Processing; and Composite Materials. View February 1997 Abstracts.

Alloy Phases

On the Effect of Plastic Deformation on the Coarsening of -Phase Precipitation in an Al-Cu Alloy [pp.257-263]
E. Cerri, E. Evangelista, N. Ryum

The Ce-Mg-Y System [pp. 265-276]
H. Flandorfer, M. Giovannini,A. Saccone, P. Rogl and R. Ferro

Transformations

An Experimental and Theoretical Study of Heat-Affected Zone Austenite Reformation in Three Duplex Stainless Steels [pp. 277-285]
Staffan Hertzman, Paulo J. Ferreira, and Bengt Brolund

On the Rule of Additivity in Phase Transformation Kinetics [pp. 287-291]
Mark Lusk and Herng-Jeng Jou

Compaction and Characterization of Mechanically Alloyed Nanocrystalline Titanium Aluminides [pp. 293-302]
C. Suryanarayana, G.E. Korth,and F.H. Froes

Transport Phenomena

Computer Simulation of Multicomponent Diffusionin Joints of Dissimilar Steels [pp. 303-308]
Thomas Helander and John Ågren

Mechanical Behavior

Role of Matrix Microstructure on Room-Temperature Tensile Properties and Fiber-Strength Utilizationof an Orthorhombic Ti-Alloy-Based Composite [pp. 309-323]
C.J. Boehlert, B.S. Majumdar,S. Krishnamurthy, and D.B. Miracle

High-Temperature Tensile Deformation and Thermal Cracking of Ferritic Spheroidal Graphite Cast Iron [pp. 325-333]
C.P. Cheng, S.M. Chen, T.S. Lui,and L.H. Chen

Bainitic Chromium-Tungsten Steels with 3 Pct Chromium [pp. 335-345]
R.L. Klueh, D.J. Alexander,and P.J. Maziasz

A Critical Assessment of the Mechanistic Aspectsin HAYNES 188 during Low-Cycle Fatiguein the Range 25°C to 1000°C [pp. 347-361]
K. Bhanu Sankara Rao, M.G. Castelli, G.P. Allen, and J.R. Ellis

Controlled Drawing to Produce Desirable Hardnessand Microstructural Gradients in Alloy 302 Wire [pp. 363-375]
M.P. Riendeau, M.C. Mataya,and D.K. Matlock

Deformation, Fracture, and Mechanical Properties of Low-Temperature-Tempered Martensitein SAE 43xx Steels [pp. 377-387]
Mario Saeglitz and George Krauss

Effects of Test Temperature, Grain Size, and Alloy Additions on the Cleavage Fracture Stress of Polycrystalline Niobium [pp. 389-399]
A.V. Samant and J.J. Lewandowski

A Study on the Subgrain Superplasticity of Extruded Al-Al₃Ni Eutectic Alloy [pp. 401-409]
J.Y. Uan, L.H. Chen, and T.S. Lui

Communication: Orientation Dependence of Microfracture Behavior in a Dual-Phase High-Strength Low-Alloy Steel [pp. 504-509]
Dongwoo Suh, Dongil Kwon,Sunghak Lee, and Nack J. Kim

Environment

A Mechanics-Based Approach to Cyclic Oxidation [pp. 411-422]
Kwai S. Chan

Electronic, Magnetic, & Optical Material

Development of a Pinned Wall Sensor Using Cobalt-Rich, Near-Zero Magnetostrictive Amorphous Alloys [pp. 423-434]
C.K. Kim and R.C. O'Handley

Solidification

A Thermodynamic Description for the Ternary Al-Mg-Cu System [pp. 435-446]
S.-L. Chen, Y. Zuo, H. Liang,and Y.A. Chang

Effects of Liquidus and Solidus Curvature in Solidification Modeling of Binary Systemswith Constant Partition Ratio [pp. 447-451]
M. Rettenmayr and T. Kraft

Nucleation and Phase Selection in Undercooled Fe-Cr-Ni Melts: Part I.Theoretical Analysis of Nucleation Behavior [pp. 453-460]
T. Volkmann, W. Löser,and D.M. Herlach

Nucleation and Phase Selection in Undercooled Fe-Cr-Ni Melts: Part II.Containerless Solidification Experiments [pp. 461-469]
T. Volkmann, W. Löser,and D.M. Herlach

Communication: Determination of the Solidification Curve of a RENE N4 Superalloy [pp. 503-504]
Sinn-Wen Chen and Shih-Chang Jeng

Materials Processing

On the Precipitation of TiC in Liquid Iron by Reactions between Different Phases [pp. 471-483]
Zhensheng Liu and Hasse Fredriksson

Undulation of W/Matrix Interface by Resintering of Cyclically Heat-Treated W-Ni-Fe Heavy Alloys [pp. 485-489]
Heung-Sub Song, Joon-Woong Noh, Woon-Hyung Baek,Suk-Joong L. Kang,and Byung-Sun Chun

Composite Materials

Tribological Properties of Aluminum Alloy Matrix TiB₂ Composite Prepared by In Situ Processing [pp. 491-502]
C.A. Caracostas, W.A. Chiou, M.E. Fine, and H.S. Cheng

Direct questions about this or any other Metallurgical and Materials Transactions page to mettrans@andrew.cmu.edu.

Search TMS Document Center Tables of Contents Subscriptions Met. and Mat. Trans. TMS OnLine