METALLURGICAL AND MATERIALS TRANSACTIONS A
TABLE OF CONTENTS
Volume 28A, No. 4, April 1997

This Month Featuring: Alloy Phases, Transformations, Mechanical Behavior, Solidification, Materials Processing, Composite Materials. View April 1997 Abstracts.

Alloy Phases

The Activity of Cobalt and Silicon in the Co-Si System with Special Focus on the -Co Solid Solution [pp. 909-915]
Dusan Lexa, Robert J. Kematick, and Clifford E. Myers

Microstructure and Mechanical Properties of Sputter-Deposited Cu1-xTax Alloys [pp. 917-925]
Hong Wang, M.J. Zaluzec, and J.M. Rigsbee

Transformations

Microstructure and Properties of Duplex -Al3(Ti, V)/-(Ti, V) Alloys [pp. 927-938]
Woong-Seong Chang and B.C. Muddle

Modeling Time Dependence of the Average Interface Migration Rate in Site-Saturated Recrystallization [pp.939-946]
P.R. Rios

Analysis of Grain Growth in a Two-Phase Gamma Titanium Aluminide Alloy [pp. 947-954]
V. Seetharaman and S.L. Semiatin

Aging Effects in a Cu-12Al-5Ni-2Mn-1Ti Shape Memory Alloy [pp. 955-967]
Z.G. Wei, H.Y. Peng, W.H. Zou, and D.Z. Yang

Diffusional Breakdown of Nickel Protective Coatings on Copper Substrate in Silver-Copper Eutectic Melts [pp. 969-977]
W.D. Zhuang and T.W. Eagar

Communication: Authors' Reply [p. 1098]

Mechanical Behavior

Numerical Models of Creep and Boundary Sliding Mechanisms in Single-Phase, Dual-Phase, and Fully Lamellar Titanium Aluminide [pp. 979-989]
Anirban Chakraborty and James C. Earthman

Fracture Toughness of Polycrystalline NiAl from Finite-Element Analysis of Miniaturized Disk-Bend Test Results [pp. 991-996]
S.J. Eck and A.J. Ardell

Influence of Solid/Liquid Interfaces on the Microstructure and Stress-Rupture Life of the Single-Crystal Nickel-Base Superalloy NASAIR 100 [pp. 997-1009]
Xiping Guo, Hengzhi Fu, and Jiahua Sun

The Effects of Composition and '/ Lattice Parameter Mismatch on the Critical Resolved Shear Stresses for Octahedral and Cube Slip in NiAlCrX Alloys [pp. 1011-1020]
R.V. Miner

Dislocation Structures in Zirconium and Zircaloy-4 Fatigued at Different Temperatures [pp. 1021-1033]
Lin Xiao and Haicheng Gu

Communication: Effects of Temperature on the Fatigue Crack Growth of an Al-Li 8090 Alloy with ' Microstructure [pp. 1089-1092]
Chong Soo Lee, Ki Jong Park, Daoming Li, and Nack Joon Kim

Communication: The Antiphase Boundary Energies of L12 Ordered Ni74.5Pd2Al23.5 Alloy [pp. 1092-1095]
J. Sun, C.S. Lee, and J.K.L. Lai

Communication: Dislocation/Particle Interactions in '(NiAl) Precipitation Strengthened Ferritic Fe-19Cr-4Ni-2Al Alloy [pp. 1098-1101]
S.M. Zhu and S.C. Tjong

Solidification

The Impact of Cooling Rates on the Microstructure of Al-U Alloys [pp. 1035-1046]
A. Munitz, V.Y. Zenou, M. Talyanker, and C. Cotler

Materials Processing

Microstructure and Properties of Copper and Aluminum Alloy 3003 Heavily Worked by Equal Channel Angular Extrusion [pp. 1047-1057]
Stephane Ferrasse, Vladimir M. Segal, K. Ted Hartwig, and Ramon E. Goforth

Superplastic Behavior of Spray-Deposited 5083 Al [pp. 1059-1068]
Yue Wu, Linda Del Castillo, and Enrique J. Lavernia

Fabrication of Al2O3-Reinforced Ni3Al Composites by a Novel In Situ Route [pp. 1069-1077]
S. Nourbakhsh, O. Sahin, and H. Margolin

Microstructure and Mechanical Behavior of the NiAl-TiC In Situ Composite [pp. 1079-1087]
Z.P. Xing, J.T. Guo, Y.F. Han, and L.G. Yu

Communication: Interfacial Bonding In Spray-Formed Metal Matrix Composites [pp. 1095-1098]
M. De Sanctis, R. Valentini, and A. Solina

Direct questions about this or any other Metallurgical and Materials Transactions page to mettrans@andrew.cmu.edu.

Search TMS Document Center Tables of Contents Subscriptions Met. and Mat. Trans. TMS OnLine