Met and Mat Trans Contents A: May 1997

METALLURGICAL AND MATERIALS TRANSACTIONS A

TABLE OF CONTENTS Volume 28A, No. 5, May 1997 This Month Featuring: Alloy Phases, Transformations, Mechanical Behavior, Environment, Surface Treatment, Solidification, Composite Materials. View May 1997 Abstracts.

METALLURGICAL AND MATERIALS TRANSACTIONS A

TABLE OF CONTENTS
Volume 28A, No. 5, May 1997

This Month Featuring: Alloy Phases, Transformations, Mechanical Behavior, Environment, Surface Treatment, Solidification, Composite Materials. View May 1997 Abstracts.

Alloy Phases

Crystal Structure Determination by High Resolution Electron Microscopy for (Sr_0.86Nd_0.14)₃Cu₂O₅ Intergrown with Infinite-Layer Compound [pp. 1111-1114]
Y.G. Peng, F.H. Li, and Y.S. Yao

Transformations

Mechanically Activated Carbothermic Reduction of Ilmenite [pp. 1115-1121]
Y. Chen, T. Hwang, M. Marsh, and J.S. Williams

Ball-Milling-Induced Crystallization and Ball-Milling Effect on Thermal Crystallization Kinetics in an Amorphous FeMoSiB Alloy [pp. 1123-1131]
F.Q. Guo and K. Lu

X-ray Study of Phase Transformations in Martensitic Ni-Al Alloys [pp. 1133-1142]
P.L. Potapov, S.Y. Song, V.A. Udovenko, and S.D. Prokoshkin

Mechanical Behavior

Influence of the Amount and Morphology of Retained Austenite on the Mechanical Properties of an Austempered Ductile Iron [pp. 1143-1156]
J. Aranzabal, I. Gutierrez, J.M. Rodriguez-Ibabe, and J.J. Urcola

Modeling and Microstructure Analysis of Fatigue Initiation Life Extension by Reductions in Microporosity [pp. 1157-1167]
J.H. Elsner, E.P. Kvam, and A.F. Grandt, Jr.

Strain Distribution in Copper Tensile Specimens Prestrained in Rolling [pp. 1169-1179]
J.V. Fernandes and M.F. Vieira

Modeling Charpy Impact Energy Property Changes Using a Bayesian Method [pp. 1181-1193]
R. Moskovic, P.L. Windle, and A.F. Smith

Effects of Aluminum Content on the Mechanical Properties of a 9Cr-0.5Mo-1.8W Steel [pp. 1195-1203]
H. Naoi, M. Ohgami, X. Liu, and T. Fujita

Isotropic and Kinematic Hardening in a Dispersion-Strengthened Aluminum Alloy [pp. 1205-1211]
A.P. Reynolds and J.S. Lyons

Tensile Properties of a Thermomechanically Processed Ductile Iron [pp. 1213-1218]
C.K. Syn, D.R. Lesuer, and O.D. Sherby

Communication: An Examination of Creep Data for an Al-Mg Composite [pp. 1271-1273]
Yong Li and Terence G. Langdon

Environment

Communication: Estimation of Atmospheric Corrosion of High-Strength, Low-Alloy Steels [p. 1274]
S. Vaynman, R.S. Guico, M.E. Fine and S.J. Manganello

Surface Treatment

The Effect of Mn-Depleted Surface Layer on the Corrosion Resistance of Shape Memory Fe-Mn-Si-Cr Alloys [pp. 1219-1222]
G. Coccia Lecis, C. Lenardi, and A. Sabatini

Microscopic Investigation of Sensitized Ni-Base Alloy 600 after Laser Surface Melting [pp. 1223-1231]
Yun Soo Lim, Jeong Hun Suh, Il Hyun Kuk, and Joung Soo Kim

Solidification

Faceted Growth of Silicon Crystals in Al-Si Alloys [pp. 1233-1243]
Ru-Yao Wang, Wei-Hua Lu, and L.M. Hogan

Solidification of Hypereutectic Al-38 Wt Pct Cu Alloy in Microgravity and in Unit Gravity [pp. 1245-1250]
Hong Yu, K.N. Tandon, and J.R. Cahoon

Composite Materials

Interfacial Reactions in the Squeeze-Cast (SAFFIL+C)/SAE 329 Al Composite [pp. 1251-1259]
Jae-Chul Lee, Gyeung-Ho Kim, Jung-Ill Lee, and Ho-In Lee

Microstructure and Properties of Spray-Deposited 2014 + 15 Vol Pct SiC Particulate-Reinforced Metal Matrix Composite [pp. 1261-1269]
J.S. Zhang, X.J. Liu, H. Cui, X.J. Duan, Z.Q. Sun, and G.L. Chen

Direct questions about this or any other Metallurgical and Materials Transactions page to mettrans@andrew.cmu.edu.

Search TMS Document Center Tables of Contents Subscriptions Met. and Mat. Trans. TMS OnLine