Met and Mat Trans Contents A: February 1998

METALLURGICAL AND MATERIALS TRANSACTIONS A

CONTENTS Volume 29A, No. 2, February 1998 This Month Featuring: Transformations; Transport Phenomena; Mechanical Behavior; Welding & Joining; Surface Treatment; Electronic, Magnetic, & Optical Material; Solidification; Materials Processing; Composite Materials. View February 1998 Abstracts.

METALLURGICAL AND MATERIALS TRANSACTIONS A

CONTENTS
Volume 29A, No. 2, February 1998

This Month Featuring: Transformations; Transport Phenomena; Mechanical Behavior; Welding & Joining; Surface Treatment; Electronic, Magnetic, & Optical Material; Solidification; Materials Processing; Composite Materials. View February 1998 Abstracts.

Transformations

Microstructural Evolution during the Austenite-to-Ferrite Transformation from Deformed Austenite [pp. 417-426]
R. Bengochea, B. López, and I. Gutierrez

Stress-State Effects on the Stress-Induced Martensitic Transformation of Carburized 4320 Steels [pp. 427-437]
I. Karaman, Huseyin Sehitoglu, H.J. Maier, and M. Balzer

Communication: Grain Boundary Precipitation Reactions in a Wrought Fe-8Al-5Ni-2C Alloy Prepared by the Conventional Ingot Process [pp. 696-700]
C. H. Hwang and T.F. Liu

Transport Phenomena

Combined Refinement of Diffusion Coefficients Applied on the Nb-C and Nb-N Systems [pp. 439-446]
David Rafaja, Walter Lengauer, Herbert Wiesenberger, and Manech Joguet

Mechanical Behavior

Torsion Textures Produced by Dynamic Recrystallization in -Iron and Two Interstitial-Free Steels [pp. 447-459]
J. Baczynski and J.J. Jonas

Effect of Prestrain on Aging and Bake Hardening of Cold-Rolled, Continuously Annealed Steel Sheets [pp. 463-467]
Woo Chang Jeong

Effect of Test Temperature on the Dynamic Torsional Deformation Behavior of Two Aluminum-Lithium Alloys [pp. 469-476]
Chang Gil Lee, Ki Jong Kim, Sunghak Lee, and Kyungmox Cho

Microstructural Development of Adiabatic Shear Bands Formed by Ballistic Impact in a WELDALITE 049 Alloy [pp. 477-483]
Chang Gil Lee, Woo Jin Park, Sunghak Lee, and Kwang Seon Shin

Microtexture Evolution during Annealing and Superplastic Deformation of Al-5 Pct Ca-5 Pct Zn [pp. 485-492]
M.T. Pérez-Prado, T.R. McNelley, O.A. Ruano, and G. González-Doncel

An Investigation of Toughening in NiAl Composites Reinforced with Yttria--Partially Stabilized Zirconia Particles [pp. 493-505]
P. Ramasundaram, F. Ye, R.R. Bowman, and W.O. Soboyejo

Cyclic Deformation Behavior of High-Purity Titanium Single Crystals: Part I. Orientation Dependence of Stress-Strain Response [pp. 507-512]
X. Tan, H. Gu, C. Laird, and N.D.H. Munroe

Cyclic Deformation Behavior of High-Purity Titanium Single Crystals: Part II. Microstructure and Mechanism [pp. 513-518]
X. Tan, H. Guo, H. Gu, C. Laird, and N.D.H. Munroe

Grain-Shape Parameters for High-Temperature Creep Resistance in Powder Metallurgy Tungsten Fine Wires [pp. 519-526]
K. Tanoue

Crystal Plasticity Forming Limit Diagram Analysis of Rolled Aluminum Sheets [pp. 527-535]
P.D. Wu, K.W. Neale, E. van der Giessen, M. Jain, A. Makinde, and S.R. MacEwen

Ir-Base Refractory Superalloys for Ultra-High Temperatures [pp. 537-549]
Y. Yamabe-Mitarai, Y. Ro, T. Maruko, and H. Harada

Brittle Fracture Initiation Associated with the Strain Localization in a Heat-Affected Zone of a Low Carbon Steel [pp. 551-558]
Ken'ichi Yokoyama and Michihiko Nagumo

Microstructure and Creep Behavior of an Orthorhombic Ti-25Al-17Nb-1Mo Alloy [pp. 559-564]
J.W. Zhang, C.S. Lee, D.X. Zou, S.Q. Li, J.K.L. Lai

Transformation Superplasticity of Iron and Fe/TiC Metal Matrix Composites [pp. 565-575]
Peter Zwigl and David C. Dunand

Communication: Sticking Mechanism during Hot Rolling of Two Stainless Steels [pp. 700-705]
Sunghak Lee, Dongwoo Suh, Seungchan Oh, and Won Jin

Welding & Joining

Role of Microstructural Degradation in the Heat-Affected Zone of 2.25Cr-1Mo Steel Weldments in Subscale Features during Steam Oxidation and Their Role in Weld Failures [pp. 577-586]
R.K. Singh Raman

A Novel Approach for Predicting the Tensile Strength of Brazed Joints [pp. 587-592]
Kunimasa Takeshita and Yuhji Terakura

Surface Treatment

An Overview of Some Advanced Surface Technology in Russia [pp. 593-610]
Anthony J. Perry and Jesse N. Matossian

Electronic, Magnetic, & Optical Material

Thermodynamics and Phase Equilibria in the Al-In-Sb System [pp. 611-616]
R. Jayaganthan and J.P. Hajra

Solidification

Numerical Simulation of Macrosegregation: a Comparison between Finite Volume Method and Finite Element Method Predictions and a Confrontation with Experiments [pp. 617-630]
N. Ahmad, H. Combeau, J.-L. Desbiolles, T. Jalanti, G. Lesoult, J. Rappaz, M. Rappaz, and C. Stomp

Solidification and Spangle Formation of Hot-Dip-Galvanized Zinc Coatings [pp. 631-646]
J. Strutzenberger and J. Faderl

Materials Processing

Microstructure and Properties of Cu-C Pseudoalloy Films Prepared by Sputter Deposition [pp. 647-658]
J.P. Chu, C.H. Chung, P.Y. Lee, J.M. Rigsbee, and J.Y. Wang

Finite Element Modeling of Distortion during Liquid Phase Sintering [pp. 659-664]
Ramnath Ganesan, Anthony Griffo, and Randall M. German

Evolution of Texture and Microstructure in a Thermomechanically Processed Al-Li-Cu Mg Alloy [pp. 665-675]
A.K. Singh, G.G. Saha, A.A. Gokhale, and R.K. Ray

Composite Materials

Superplastic Behavior and Cavitation in High-Strain-Rate Superplastic Si₃N4_p/Al-Mg-Si Composites [pp. 677-683]
Hajime Iwasaki, Takasuke Mori, Mamoru Mabuchi, and Kenji Higashi

Failure of SiC Particulate-Reinforced Metal Matrix Composites Induced by Laser Thermal Shock [pp. 685-692]
Y.C. Zhou, Z.P. Duan, and Q.B. Yang

Communication: Microstructural Characterization of the Matrix in the SiC Fiber-Reinforced Ti-15-3 Composite [pp. 693-696]
S.Q. Guo and Y. Kagawa

Other

Erratum [pp. 706]

Contents:
Metallurgical and Materials Transactions B, Volume 29B, February 1998

Direct questions about this or any other Metallurgical and Materials Transactions page to mettrans@andrew.cmu.edu.

Search TMS Document Center Tables of Contents Subscriptions Met. and Mat. Trans. TMS OnLine