Met and Mat Trans Contents A: June 1998

METALLURGICAL AND MATERIALS TRANSACTIONS A

CONTENTS Volume 29A, No. 6, June 1998 This Month Featuring: The 1997 Edward DeMille Campbell Memorial Lecture; Alloy Phases; Transformations; Transport Phenomena; Mechanical Behavior; Environment; Surface Treatment; Solidification; Materials Processing; Composite Materials. View June 1998 Abstracts.

METALLURGICAL AND MATERIALS TRANSACTIONS A

CONTENTS
Volume 29A, No. 6, June 1998

This Month Featuring: The 1997 Edward DeMille Campbell Memorial Lecture; Alloy Phases; Transformations; Transport Phenomena; Mechanical Behavior; Environment; Surface Treatment; Solidification; Materials Processing; Composite Materials. View June 1998 Abstracts.

The 1997 Edward DeMille Campbell Memorial Lecture

Grain Boundary Cracking [pp. 1535-1544]
Paul G. Shewmon

Alloy Phases

Thermodynamic Properties and Phase Equilibria for Pt-Rh Alloys [pp. 1545-1550]
K.T. Jacob, Shashank Priya, and Yoshio Waseda

Microstructural Characterization of 5 to 9 pct Cr-2 pct W-V-Ta Martensitic Steels [pp. 1551-1558]
R. Jayaram and R.L. Klueh

F-Type Icosahedral Phase and a Related Cubic Phase in the Al-Rh-Cu System [pp. 1559-1563]
X.Z. Li, K.-T. Park, K. Sugiyama and K. Hiraga

Structural Models of ₂-Inflated Monoclinic and Orthorhombic Al-Co Phases [pp. 1565-1572]
Z.M. Mo, H.X. Sui, X.L. Ma, and K.H. Kuo

A New Equation for the Cr Equivalent in 9 to 12 Pct Cr Steels [pp. 1573-1578]
S.H. Ryu and Jin Yu

Communication: On the Observation of a New Ternary MgSiCa Phase in Mg-Si Alloys [pp. 1759-1763]
Y. Carbonneau, A. Couture, A. Van Neste, and R. Tremblay

Transformations

The -Martensitic Transformation and its Reversion in the FeMnSiCrNi Shape-Memory Alloy [pp. 1579-1584]
Qingsuo Liu, Zhihong Ma, and Nanju Gu

Microstructural Evaluation of Ti-6-22-22 Alloy [pp. 1585-1592]
A.W. Wilson and J.M. Howe

Transport Phenomena

Effect of Dislocation Trapping on Deuterium Diffusion in Deformed, Single-Crystal Pd [pp. 1593-1598]
Brent J. Heuser and John S. King

Mechanical Behavior

Temperature-Dependent Void-Sheet Fracture in Al-Cu-Mg-Ag-Zr [pp. 1599-1613]
Michael J. Haynes and Richard P. Gangloff

Damage Process in Commercially Pure -Titanium Alloy without (Ti40) and with (Ti40-H) Hydrides [pp. 1615-1628]
J. Huez, X. Feaugas, A.L. Helbert, I. Guillot, and M. Clavel

Microstructure and Mechanical Behavior of Reaction Hot-Pressed Titanium Silicide and Titanium Silicide-Based Alloys and Composites [pp. 1629-1642]
R. Mitra

Behavior and Rupture of Hydrided ZIRCALOY-4 Tubes and Sheets [pp. 1643-1651]
F. Prat, M. Grange, J. Besson and E. Andrieu

Superplastic Flow and Cavitation in Zn-22 Pct Al Doped with Cu [pp. 1653-1663]
Ahmadali Yousefiani and Farghalli A. Mohamed

Environment

Elevated-Temperature Oxidation Behavior of Titanium Silicide and Titanium Silicide=nBased Alloy and Composite [pp. 1665-1675]
R. Mitra and V.V. Rama Rao

Surface Treatment

The Effect of Heat Input on the Microstructure and Properties of Nickel Aluminum Bronze Laser Clad with a Consumable of Composition Cu-9.0Al-4.6Ni-3.9Fe-1.2Mn [pp. 1677-1690]
C.V. Hyatt, K.H. Magee and T. Betancourt

Solidification

Particle Engulfment and Pushing by Solidifying Interfaces: Part I. Ground Experiments [pp. 1691-1696]
Frank R. Juretzko, Brij K. Dhindaw, Doru M. Stefanescu, Subhayu Sen, and Peter A. Curreri

Particle Engulfment and Pushing by Solidifying Interfaces: Part II. Microgravity Experiments and Theoretical Analysis [pp. 1697-1706]
D.M. Stefanescu, F.R. Juretzko, B.K. Dhindaw, A. Catalina, S. Sen, and P.A. Curreri

Grain Refining of Al-4.5Cu Alloy by Adding an Al-30TiC Master Alloy [pp. 1707-1710]
Kazuaki Sato and Merton C. Flemings

Materials Processing

Solidification Processing of Al-Al₂O₃ Composite Using Turbine Stirrer [pp. 1711-1718]
J.A. Al-Jarrah, S. Ray, and P.K. Ghosh

Synthesis of Nanocomposite Thin Films Based on the Mo-Si-C Ternary System and Compositional Tailoring through Controlled Ion Bombardment [pp. 1719-1725]
S. Govindarajan, J.J. Moore, and J. Disam

Communication: The Knoop-Hardness Yield Locus of an Orthorhombic Titanium Aluminide Alloy [pp. 1763-1765]
P.D. Nicolaou and S.L. Semiatin

Composite Materials

Control of Interfacial Reactions during Liquid Phase Processing of Aluminum Matrix Composites Reinforced with INCONEL 601 Fibers [pp. 1727-1739]
F. Boland, C. Colin, and F. Delannay

Dry Sliding Wear of a Ti₅₀Ni₂₅Cu₂₅ Particulate-Reinforced Aluminum Matrix Composite [pp. 1741-1747]
G. Wang, P. Shi, M. Qi, J.J. Xu, F.X. Chen, and D.Z. Yang

Effects of R-Ratio on the Fatigue Crack Growth of Nb-Si_(ss) and Nb-10Si In Situ Composites [pp. 1749-1757]
W.A. Zinsser Jr. and J.J. Lewandowski

Table of Contents, Metallurgical and Materials Transactions B, June 1998

Direct questions about this or any other Metallurgical and Materials Transactions page to mettrans@andrew.cmu.edu.

Search TMS Document Center Tables of Contents Subscriptions Met. and Mat. Trans. TMS OnLine