METALLURGICAL AND MATERIALS TRANSACTIONS A
	CONTENTS Volume 29A, No. 9, September 1998 This Month Featuring: Symposium on Mechanical Behavior of Bulk Nanocrystalline Solids; Transformations; Mechanical Behavior; Solidification; Materials Processing; Composite Materials. View September 1998 Abstracts.

Symposium on Mechanical Behavior of Bulk Nanocrystalline Solids

Microstructural Characteristics of Ultrafine-Grained Aluminum Produced Using Equal-Channel Angular Pressing [pp. 2245-2252]
Yoshinori Iwahashi, Minoru Furukawa, Zenji Horita, Minoru Nemoto, and Terence G. Langdon

Microstructures and Properties of Nanocomposites Obtained through SPTS Consolidation of Powders [pp. 2253-2260]
I.V. Alexandrov, Y.T. Zhu, T.C. Lowe, R.K. Islamgaliev, and R.Z. Valiev

Mechanical Behavior of a Bulk Nanostructured Iron Alloy [pp. 2261-2271]
J.E. Carsley, A. Fisher, W.W. Milligan, and E.C. Aifantis

Effect of B on the Microstructure and Mechanical Properties of Mechanically Milled TiAl Alloys [pp. 2273-2283]
Sang H. Kim, H.H. Chung, Sung G. Pyo, S.J. Hwang, and Nack J. Kim

Mechanical Properties, Ductility, and Grain Size of Nanocrystalline Iron Produced by Mechanical Attrition [pp. 2285-2295]
T.R. Malow and C.C. Koch

Transformations

Static Recrystallization Kinetics with Homogeneous and Heterogeneous Nucleation Using a Cellular Automata Model [pp. 2307-2321]
R.L. Goetz and V. Seetharaman

Mechanical Behavior

Heterogeneous Microstructures and Microtextures in Cube-Oriented Al Crystals after Channel Die Compression [pp. 2333-2344]
Qing Liu, Claire Maurice, Julian Driver, and Niels Hansen

High-Temperature Deformation of Commercial-Purity Aluminum [pp. 2345-2359]
E.S. Puchi and M.H. Staia

An Investigation of the Fracture and Fatigue Crack Growth Behavior of Forged Damage-Tolerant Niobium Aluminide Intermetallics [pp. 2361-2374]
F. Ye, C. Mercer, and W.O. Soboyejo

Solidification

Communication: Discussion of "Effect of Dendrite Arm Coarsening on Microsegregation" [pp. 2447-2449]
T. Kraft and Y.A. Chang

Authors' Reply [pp. 2449-2450]
H. Combeau, J.-M. Drezet, A. Mo, and M. Rappaz

Materials Processing

The Sweep Constant Concept in Phase Coarsening [pp. 2395-2398]
C.S. Pande, R.A. Masumura, and S.P. Marsh

Transmission Electron Microscope Specimen Preparation of Zn Powders Using the Focused Ion Beam Lift-Out Technique [pp. 2399-2406]
B.I. Prenitzer, L.A. Giannuzzi, K. Newman, S.R. Brown, R.B. Irwin, T.L. Shofner, and F.A. Stevie

Investigation of Thermomechanical Behavior of a Work Roll and of Roll Life in Hot Strip Rolling [pp. 2407-2424]
C.G. Sun, C.S. Yun, J.S. Chung, and S.M. Hwang

A Novel Way of Amorphous Phase Formation during Mechanical Alloying of Copper and Cadmium Powders [pp. 2425-2432]
D.L. Zhang and T.B. Massalski

Composite Materials