METALLURGICAL AND MATERIALS TRANSACTIONS A
CONTENTS
Volume 29A, No. 11, November 1998

This Month Featuring: Alloy Phases; Transformations; Transport Phenomena; Mechanical Behavior; Welding & Joining; Solidification; Materials Processing; Composite Materials. View November 1998 Abstracts.

Alloy Phases

Effect of Ordering Energy and Stoichiometry in = 5 Boundaries in B2 Compounds [pp. 2655-2668]
B. Mutasa and D. Farkas

Transformations

Characterization by Thermoelectric Power of a Commercial Aluminum-Iron-Silicon Alloy (8011) during Isothermal Precipitation [pp. 2669-2677]
Ney José Luiggi A.

Nanometer-Scale, Fully Lamellar Microstructure in an Aged TiAl-Based Alloy [pp. 2679-2685]
Y.Q. Sun

Grain Growth and Carbide Precipitation in Superalloy, UDIMET 520 [pp. 2687-2695]
S. Xu, J.I. Dickson, and A.K. Koul

Transformation Relaxation and Aging in a CuZnAl Shape-Memory Alloy Studied by Modulated Differential Scanning Calorimetry [pp. 2697-2705]
Z.G. Wei

Transport Phenomena

Surface Segregation of Phosphorus, Carbon, and Sulfur[epin Commercial Low-Carbon Grades of Steel [pp. 2707-2715]
V. Rangarajan, R. Toncheff, and L.L. Franks

Interdiffusion in the Carbides of the Nb-C System [pp. 2717-2726]
J. Woodford and Y.A. Chang

Mechanical Behavior

Some Observations on Cyclic Deformation Structures in the High-Strength Commercial Aluminum Alloy AA 7150 [pp. 2727-2736]
D.N. Hanlon and W.M. Rainforth

Interface-Controlled Fatigue Cracking of SCS-6/Ti-22Al-23Nb ``Orthorhombic'' Titanium Aluminide Composite [pp. 2737-2746]
Y.C. Her, P.C. Wang, and J.-M. Yang

Sliding Wear Behavior of Some Al-Si Alloys: Role of Shape and Size of Si Particles and Test Conditions [pp. 2747-2752]
B.K. Prasad, K. Venkateswarlu, O.P. Modi, A.K. Jha, S. Das, R. Dasgupta, and A.H. Yegneswaran

Effect of Pitting Corrosion in NaCl Solutions on the Statistics of Fracture of Beryllium [pp. 2753-2760]
Rajendra U. Vaidya, Mary Ann Hill, Marilyn Hawley, and Darryl P. Butt

Welding & Joining

Spatially Resolved X-Ray Diffraction Phase Mapping and Transformation Kinetics in the Heat-Affected Zone of Commercially Pure Titanium Arc Welds [pp. 2761-2773]
John W. Elmer, Joe Wong, and Thorsten Ressler

Charpy V-Notch Properties and Microstructures of Narrow Gap Ferritic Welds of a Quenched and Tempered Steel Plate [pp. 2775-2784]
G.L.F. Powell and G. Herfurth

Solidification

Solidification of Nb-Bearing Superalloys: Part I. Reaction Sequences [pp. 2785-2796]
J.N. DuPont, C.V. Robino, J.R. Michael, M.R. Notis, and A.R. Marder

Solidification of Nb-Bearing Superalloys: Part II. Pseudoternary Solidification Surfaces [pp. 2797-2806]
J.N. DuPont, C.V. Robino, A.R. Marder, and M.R. Notis

<110> Dendrite Growth in Aluminum Feathery Grains [pp. 2807-2817]
S. Henry, P. Jarry, and M. Rappaz

Materials Processing

Reactive Infiltration Processing of Aluminum-Nickel Intermetallic Compounds [pp. 2819-2828]
C. San Marchi and A. Mortensen

Numerical Analysis of the Formability of an Aluminum 2024 Alloy Sheet and Its Laminates with Steel Sheets [pp. 2829-2834]
Hirohiko Takuda and Natsuo Hatta

Composite Materials

Role of Cold Work and SiC Reinforcements on the '/ Precipitation in Al-10 pct Mg Alloy [pp. 2835-2842]
N.R.M.R. Bhargava, I. Samajdar, S. Ranganathan, and M.K. Surappa

Effect of SiC Volume Fraction and Particle Size on the Fatigue Resistance of a 2080 Al/SiCp Composite [pp. 2843-2854]
N. Chawla, C. Andres, J.W. Jones, and J.E. Allison

Damage Mechanisms in a Cast Ductile Iron and a Al2O3p/Al Composite [pp. 2855-2862]
J.H. Zhu, P.K. Liaw, J.M. Corum, J.G.R. Hansen, and J.A. Cornie

Erratum [p. 2863]

Direct questions about this or any other Metallurgical and Materials Transactions page to mettrans@andrew.cmu.edu.

Search TMS Document Center Tables of Contents Subscriptions Met. and Mat. Trans. TMS OnLine