METALLURGICAL AND MATERIALS TRANSACTIONS A
TABLE OF CONTENTS
Volume 28A, No. 3A, Special Issue 1997

This Month Featuring: Alloy Phases, Transformations, Transport Phenomena, Mechanical Behavior, Physical Chemistry, Environment, Surface Treatment, Solidification, Materials Processing. View Special Issue 1997 Abstracts.

Alloy Phases

Decagonal Quasicrystal and Related Crystalline Phases in Mn-Ga Alloys with 52 to 63 At. Pct Ga [pp. 729-742]
J.S. Wu and K.H. Kuo

Transformations

Mössbauer Effect Study of Mechanically Alloyed and 1 Fe-Zn Intermediate Phases [pp. 743-747]
Zhentong Liu and Oswald N.C. Uwakweh

Grain Boundary Mobility during Recrystallization of Copper [pp. 749-754]
R.A. Vandermeer, D. Juul Jensen, and E. Woldt

Transport Phenomena

On the Blister Formation in Copper Alloys Due to the Helium Ion Implantation [pp. 755-762]
D. Moreno and D. Eliezer

Mechanical Behavior

High-Temperature Crack Growth in 304 Stainless Steel under Mixed-Mode Loading Conditions [pp. 763-773]
W.E. Churley and J.C. Earthman

Secondary Hardening and Fracture Behavior in Alloy Steels Containing Mo, W, and Cr [pp. 775-784]
H. Kwon, K.B. Lee, H.R. Yang, J.B. Lee, and Y.S. Kim

Crystallographic Analysis of the Influence of Stress State on Earing Behavior in Deep Drawing of Face-Centered Cubic Metals [pp. 785-793]
S.Y. Li, X.M. Zhang, H.Z. Zhou, and G. Gottstein

Room-Temperature Deformation Behavior of Directionally Solidified Multiphase Ni-Fe-Al Alloys [pp. 795-807]
A. Misra and R. Gibala

Dry Sliding Wear Response of Some Bearing Alloys as Influenced by the Nature of Microconstituents and Sliding Conditions [pp. 809-815]
B.K. Prasad

The Effect of Hydrogen on the Fracture Toughness of Alloy X-750 [pp. 817-823]
Douglas M. Symons and Anthony W. Thompson

Mechanisms of Ambient Temperature Fatigue Crack Growth in Ti-46.5Al-3Nb-2Cr-0.2W [pp. 825-835]
B.D. Worth, J.M. Larsen, S.J. Balsone, and J.W. Jones

Physical Chemistry

Reaction Diffusion and Phase Equilibria in the V-N System [pp. 837-842]
C. Teichmann, W. Lengauer, P. Ettmayer, J. Bauer, and M. Bohn

Environment

Room-Temperature Diffusion in Cu/Ag Thin-Film Couples Caused by Anodic Dissolution [pp. 843-850]
Denny A. Jones, Alan F. Jankowski, and Gail A. Davidson

Surface Treatment

X-Ray and Transmission Electron Microscopy Investigation of Strain in a Nitrided Steel: No Evidence of Plastic Deformation [pp. 851-857]
L. Barrallier, R. Soto, J.-M. Sprauel, and A. Charai

Solidification

Convection and Channel Formation in Solidifying Pb-Sn Alloys [pp. 859-866]
Michael I. Bergman, David R. Fearn, Jeremy Bloxham, and Margarita C. Shannon

On the Transition from Pushing to Engulfment During Directional Solidification of the Particle-Reinforced Aluminum-Based Metal-Matrix Composite 2014 + 10 Vol Pct Al2O3 [pp. 867-874]
U. Hecht and S. Rex

The Influence of Convection during Solidification on Fragmentation of the Mushy Zone of a Model Alloy [pp. 875-883]
C.J. Paradies, R.N. Smith, and M.E. Glicksman

Materials Processing

An Investigation of the Effect of Texture on the High-Temperature Flow Behavior of an Orthorhombic Titanium Aluminide Alloy [pp. 885-893]
P.D. Nicolaou and S.L. Semiatin

Consolidation of Nanostructured Metal Powders by Rapid Forging: Processing, Modeling, and Subsequent Mechanical Behavior [pp. 895-904]
G.R. Shaik and W.W. Milligan

Direct questions about this or any other Metallurgical and Materials Transactions page to mettrans@andrew.cmu.edu.

Search TMS Document Center Tables of Contents Subscriptions Met. and Mat. Trans. TMS OnLine