METALLURGICAL AND MATERIALS TRANSACTIONS B
TABLE OF CONTENTS
Volume 27B, No. 1, February 1996

This Month Featuring: Pyrometallurgy; Electrometallurgy; Transport Phenomena; Process Control; Physical Chemistry; Solidification; and Solid State Reactions. View February 1996 Abstracts.

Pyrometallurgy

Reaction Equilibria in the Production of Manganese Ferroalloys [pp. 5-17]
Weizhong and Sverre E. Olsen

Electrometallurgy

Physical Modeling Studies of Electrolyte Flow Due to Gas Evolution and Some Aspects of Bubble Behavior in Advanced Hall Cells: Part III. Predicting the Performance of Advanced Hall Cells [pp. 19-27]
R. Shekhar and J.W. Evans

Transport Phenomena

Prediction of Liquid Metal Viscosities Using an Adjustable Hard Sphere Radial Distribution Curve [pp. 29-34]
Anthony L. Hines and Tsair-Wang Chung

Water Model Experiment on the Liquid Flow Behavior in a Bottom Blown Bath with Top Layer [pp. 35-41]
Manabu Iguchi, Olusegun J. Ilegbusi, Hiroshi Ueda, Tomoaki Kuranaga, and Zen-Ichiro Morita

Probing the Initial Stage of Synthesis of Al2O3/Al Composites by Directed Oxidation of Al-Mg Alloys [pp. 43-50]
H. Venugopalan, K. Tankala and T. Debroy

Process Control

Variation of Contact Angles with Temperature and Time in the Al-Al2O3 System [pp. 51-55]
Woohyun Jung, Huesup Song, Sang Whan Park, and Doh-Yeon Kim

Physical Chemistry

Solubility of Carbon in CaO-Al2O3 Melts [pp. 57-64]
Masaki Kuwata and Hideaki Suito

Representation of Mixed Reactive Gases on Free Energy (Ellingham-Richardson) Diagrams [pp. 65-69]
C.V. Robino

Influence of Phosphorus Addition on the Surface Tension of Liquid Iron and Segregation of Phosphorus on the Surface of Fe-P Alloy [pp. 71-79]
X.M. Xue, H.G. Jiang, Z.T. Sui, B.Z. Ding, and Z.Q. Hu

Communication: The Influence of Oxygen Pressure and P2O5 on the Surface Tension of Liquid Iron Oxide at 1435°C [pp. 139-140]
P.K. Bhattacharyya and D.R. Gaskell

Communication: Vacuum Evaporation of KCl-NsCl Salts: Part I. Thermodynamic Modeling of Vapor Pressures of Solid and Liquid Solutions [pp. 141-146]
Lily L. Wang and Terry C. Wallace, Sr.

Solidification

Thermomechanics of the Cooling Stage in Casting Processes: Three-Dimensional Finite Element Analysis and Experimental Validation [pp. 81-99]
M. Bellet, F. Decultieux, M. Ménaï, F. Bay, C. Levaillant, J.-L. Chenot, P. Schmidt, and I.L. Svensson

Scaling of Intragranular Dendritic Microstructure in Ingot Solidification [pp. 101-113]
D. Bouchard and J.S. Kirkaldy

The Design of Feed Systems for Thin-Walled Zinc High-Pressure Die Castings [pp. 115-118]
M.T. Murray and J.R. Griffiths

Heat-Flow-Based Analysis of Surface Crack Formation During the Start-Up of the Direct Chill Casting Process: Part I. Development of the Inverse Heat-Transfer Model [pp. 119-127]
J.B. Wiskel and S.L. Cockcroft

Heat-Flow-Based Analysis of Surface Crack Formation During the Start-Up of the Direct Chill Casting Process: Part II. Experimental Study of an AA5182 Rolling Ingot [pp. 129-137]
J.B. Wiskel and S.L. Cockcroft

Solid State Reactions

Communication: Discussion of "The Effect of Steel Chemistry on the Formation of Fe-Zn Intermetallic Compounds of Galvanneal-Coated Steel Sheets" [pp. 146-147]
Lucille A. Giannuzzi, Paul R. Howell, and William R. Bitler

Communication: Author's Reply [pp. 147-148]
C.S. Lin and M. Meshii

Direct questions about this or any other Metallurgical and Materials Transactions page to mettrans@andrew.cmu.edu.

Search TMS Document Center Tables of Contents Subscriptions Met. and Mat. Trans. TMS OnLine