1999
DECEMBER
"Iron Control in
Zinc Pressure Leach Processes" by K.R. Buban, M.J. Collins,
and I.M. Masters
NOVEMBER
"Sheet
Metal Forming: A Review" by William F.
Hosford
OCTOBER
"Using the Centrifugal Method for the Plasma-Arc Vitrification
of Waste" by R.K. Womack
SEPTEMBER
 "Holistic
Strategies for Designing Multistage Materials Processes" by W.G. Frazier and E.A. Medina
"Using Hybrid Modeling for the Interdisciplinary Design
of More Affordable Systems" by James
W. Poindexter, Brian A. Stucke, and Gerald C. Shumaker
"Incorporating Hybrid Models into a Framework for Designing
Multistage Material Processes" by Enrique
A. Medina
"Extrusion Die Design: A New Methodology of Using Design
of Experiments as a Precursor to Neural Networks" by Bhavin V. Mehta, Hamza Ghulman, and R. Gerth
"Using Hybrid Modeling for Testing Intelligent Software
for Lunar-Mars Closed Life Support" by Jane T. Malin
AUGUST
JULY
"Monitoring the Solidification of Single-Crystal Castings
Using High-Energy X-Ray Diffraction"
by D.W. Fitting, W.P. Dubé, and T.A. Siewert
"Investigating Solidification with the Laser-Engineered
Net Shaping (LENSTM) Process" by William Hofmeister, Melissa Wert, John Smugeresky, Joel A. Philliber,
Michelle Griffith, and Mark Ensz
"Observing and Measuring Solidification Phenomena at High
Temperatures" by C. Orrling, Y. Fang, N. Phinichka, S. Sridhar,
and A.W. Cramb
JUNE
MAY
"Aluminum Production Paths in the New Millennium" by Barry J. Welch
APRIL
"Recent Developments in the Thermomechanical Fatigue Life
Prediction of Superalloys" by Changan Cai, Peter K. Liaw, Mingliang Ye, and
Jie Yu
"The CMSF Process: The Spray Forming of Clean Metal" by W.T. Carter, Jr., M.G. Benz, A.K. Basu, R.J. Zabala, B.A. Knudsen,
R.M. Forbes Jones, H.E. Lippard, and R.L. Kennedy
"Spray Forming: Alloys, Products, and Markets" by Alan Leatham
"The Production-Scale Spray Forming of Superalloys for Aerospace Applications" by Gregory A. Butzer
MARCH
"Materials Issues in Area-Array Microelectronic Packaging" by Darrel R. Frear
FEBRUARY
"The Structure and Mechanical Behavior of Ice" by Erland M. Schulson
JANUARY
"The Structural Evolution of Superalloy Ingots during Hot Working" by Robin M. Forbes Jones and Laurence A. Jackman
DECEMBER
"Producing Metal Parts with Selective Laser Sintering/Hot Isostatic Pressing" by Suman Das, Martin Wohlert, Joseph J. Beaman,
and David L. Bourell
NOVEMBER
"The November JOM-e: The NDE of Material Properties" by Peter K. Liaw
"Using Acoustic Emission in Fatigue and Fracture Materials Research" by Miinshiou Huang, Liang Jiang, Peter K. Liaw,
Charlie R. Brooks, Rodger Seeley, and Dwaine L. Klarstrom
"The Nondestructive Evaluation of Advanced Ceramics and Ceramic-Matrix Composites" by Jeongguk Kim and Peter K. Liaw
"The Microstructural Characterization of Sensors Based on Electronic Ceramic Materials" by P.I. Gouma, S.A. Akbar, and M.J. Mills
"Using Scanning Acoustic Microscopy to Study Subsurface Defects and Crack Propagation in Materials" by Zayna M. Connor, Morris E. Fine, Jan D. Achenbach, and Mark E. Seniw
OCTOBER
"Developing
a High-Temperature Superconducting Bulk Magnet for the Maglev Train
of the Future" by Hiroyuki Fujimoto
SEPTEMBER
"The Key Role of Impurities in Ancient Damascus Steel Blades" by J.D. Verhoeven, A.H. Pendray, and W.E. Dauksch
AUGUST
"The Numerical Analysis of Creep Deformation and Cavitation
in TiAl Intermetallic Alloys" by A. Chakraborty
and J.C. Earthman
JULY
"The Naval Research Laboratory: 75 Years of Materials Innovation" by Bhatka B. Rath and Don J. DeYoung
JUNE
"Metal Forming at the Center of Excellence for the Synthesis and Processing of Advanced Materials" by D.A. Hughes, M.E. Kassner, M.G. Stout, and J.S. Vetrano
MAY
APRIL
"EnvIRONment
and Other Bath Smelting Processes for Treating Organic and Ferrous Wastes" by S. Street, G. Brooks, L. Reilly, and H.K. Worner
MARCH
"Reducing Defects in Remelting Processes for High-Performance
Alloys" by James A. Van Den Avyle, John A. Brooks, and
Adam C. Powell
FEBRUARY
"Solidification Processing of Materials in Magnetic Fields" by B.Q. Li
JANUARY
"The Royal Mail Ship Titanic: Did a Metallurgical
Failure Cause a Night to Remember?" by
Katherine Felkins, H.P. Leighly, Jr., and A. Jankovic
DECEMBER
"The Thermodynamic Modeling of Multicomponent Phase Equilibria" by Ursula R. Kattner
NOVEMBER
"Developments in the Processing and Properties of Particulate Al-Si Composites" by J.U. Ejiofor and R.G. Reddy
OCTOBER
"The Challenge of Precursor Compounds in the MOCVD of Oxides" by Ren Xu
SEPTEMBER
"III-V Nitride Semiconductors for High-Performance Blue
and Green Light-Emitting Devices" by
Daniel Steigerwald, Serge Rudaz, Heng Liu, R. Scott Kern, Werner Götz,
and Robert Fletcher
AUGUST
"The Mechanical Properties of In-Situ Composites" by R.M. Aikin, Jr.
JULY
"Hot Demonstrations of Nuclear-Waste Processing Technologies" by H.F. McFarlane, K.M. Goff, F.S. Felicione,
C.C. Dwight, and D.B. Barber
JUNE
"The Discovery and Acceptance of the Kirkendall Effect: The Result of a Short Research Career" by Hideo Nakajima
MAY
 "Low-Cost Titanium Armors for Combat Vehicles" by Jonathan S. Montgomery, Martin G.H. Wells, Brij Roopchand, and James W. Ogilvy
APRIL
 "Metal-Casting Process Design: Postmortem and Predictive Troubleshooting" by Tanvir Y. Goraya, Michal S. Soclof, David G. Yan, and Zhuo Meng
MARCH
"Bir Umm Fawakhir: Insights into Ancient Egyptian Mining" by Carol Meyer
FEBRUARY
"Is the Use of Advanced Materials in Sports Equipment
Unethical?" F.H. Froes
JANUARY
"Science and Art Converge at the National Gallery of Art" by L. Glinsman and D. Barbour
DECEMBER
"The Integration of Process and Cost Modeling--A Powerful Tool for Business Planning" by Julian
Szekely, John Busch, and Gerardo Trapaga
NOVEMBER
"Limited Casting Resources Meet World Class Ingenuity" by George J. Binczewski
OCTOBER
"Bessie
Bessemer Furnace and Old Man Steel Re-educate with Performance Steelmaking" by Tammy Beazley
SEPTEMBER
"An Ultrasonic Sensor for High-Temperature Materials Processing" by David A. Stubbs and Rollie E. Dutton
AUGUST
"Alumina Production in Russia Part I: Historical Background" by Vadim Smirnov
JULY
"Steel vs. Plastics: The Competition for Light-Vehicle Fuel Tanks" by Peter J. Alvarado
JUNE
"Needed: Materials for 24th Century Starships--Considering
the Materials Demands of the Star Trek Universe"
by André Bormanis
MAY
"A Lower-Melting-Point Solder Alloy for Surface Mounts" by M.T. McCormack, Y. Degani, H.S. Chen, and W.R. Gesick
APRIL
"A Sampling of Highlights from the EPD Congress 1996" by Mark E. Schlesinger
MARCH
"Benchmark Testing the Flow and Solidification Modeling of Al Castings" by B. Sirrell, M. Holliday, and J. Campbell
FEBRUARY
"A Brief History of Composites in the U.S.--The Dream and the Success" by E. Pete Scala
JANUARY
"Oxygen Pyrometallurgy at Copper Cliff--A Half Century of Progress" by Paul E. Queneau and Samuel E. Marcuson
DECEMBER
"Step
Inside the Cyberworld of a Virtual Reality Steel Mill" by Tammy M. Beazley.
NOVEMBER
"The
Point of a Monument: A History of the Aluminum Cap of the Washington
Monument" by George J. Binczewski
OCTOBER
"An
Integrated Procedure for Modeling Investment Castings" by John S. Tu, R. Kelly Foran, Albert M. Hines, and Paul R. Aimone
SEPTEMBER
"A
New Paradigm: Multi-User Scanning Electron Microscopy" by L.S. Chumbley, M. Meyer, K. Fredrickson, and F.C. Laabs
AUGUST
"The
Chronology of a Microgravity Spaceflight Experiment: IDGE" by Martin E. Glicksman, Matthew B. Koss, and Edward A. Winsa
JULY
"Recent
Developments in a Vision-Based Surface Strain Measurement System" by D.W. Manthey and D. Lee
JUNE
"Megatrends
in Manufacturing IV: Perspectives on Metal Working and the Government's
Role" by James J. Robinson
MAY
"AAES
Reports the Engineering Salary Trends of 1994" by Tammy M. Beazley
APRIL
"Understanding
the Internet: A Guide for Materials Scientists and Engineers" by Kenneth J. Meltsner
|
"