Selected Readings Magnesium Alloy Development

Provided Courtesy of Materials Technology@TMS

For additional resources, visit
http://www.materialstechnology.org

| | |
| |

The following are selected readings for magnesium alloy development reviewed by an advisory group of | |
TMS subject matter experts | |
| |
| |
| |
| | | |
PAPER TITLE | AUTHOR(S) | SOURCE | MORE |

"Development of a New Wrought Magnesium-Aluminum-Manganese Alloy AM30" | A. A. Luo and A. K. Sachdev | Met. Trans. A,  Vol. 38A, June 2007.  Pp. 1184-1192 | Read Abstract |
"Effect of Sr Additions on the Microstructure and Strength of a Mg-Al-Ca Ternary Alloy" | A. Suzuki, N. D. Saddock, L. Riester, E. Lara-Curzio, J. W. Jones and T. M. Pollock | Met. Trans. A. Vol. 38A, No. 2.  February, 2007.  Pp. 420-427 | Read Abstract |
"The Capability of MRI Magnesium Alloys to Address High Temperature Applications Requirements" | N. Moskovich, E. Aghion, A. Arnon and B. Bronfin | Magnesium Technology 2007, p. 253 | Link to 2007 Proceedings |
"Microstructure, Corrosion and Creep of As-Cast Magnesium Alloys Mg-2Sn-2Ca and Mg-4Sn-2Ca" | T. A. Leil, K. P. Rao, N. Hort, Y. Huang, C. Blawert, H. Dieringa, and K. U. Kainer | Magnesium Technology 2007, p. 257 | Link to 2007 Proceedings |
"Influence of Alloying Elements on the Mechanical Properties of Zinc Containing Extruded Magnesium Alloys" | E. M. Garcia, J. Bohlen, D. Letzig, and K. U. Kainer | Magnesium Technology 2007, p. 263 | Link to 2007 Proceedings |
"Subgrain Stabilized Microstructure in Mg-Zn-Sn-Y Alloys" | A. Gorny, A. Katsman, I. Popov, and M. Bamberger | Magensium Technology 2007, p. 307 | Link to 2007 Proceedings |
"AM30 - A New Wrought Magnesium Alloy" | A. Luo and A. Sachdev | Magnesium Technology 2007, p. 321 | Link to 2007 Proceedings |
"Thermodynamic Modeling of the Mg-Sn-Zn-Al System and Its Application fo Mg Alloy Design" | I.-H. Jung, W.-J. Park, S.-H. Ahn, D.-H.Kang and N. J. Kim | Magnesium Technology 2006, p. 457 | Link to 2006 Proceedings |
"AM-HP2:  A New Magnesium High Pressure Diescasting Alloy for Automotive Powertrain Applications" | M. A. Gibson, C. J. Bettles, M. T. Murray, and G. L. Dunlop | Magnesium Technology 2006, p. 327 | Link to 2006 Proceedings |
"AM-Lite: A New Magnesium Diescasting Alloy for Decorative Applications" | T. Abbortt, M. Murray, and G. Dunlop | Magnesium Technology 2006, p. 481 | Link to 2006 Proceedings |
"Mechanisms of Creep Deformation in Mg-Sc-based Alloys" | B. L. Mordike, I. I. Stulíková, and B. Smola | Met. Trans. A. Vol. 36A. July, 2005, pp. 1729-1736 | Read Abstract |
"Process and Alloy Development for Hydrostatic Extrusion of Magnesium:  The European Community Research Project MAGNEXTRUSCO" | J. Bohlen, J. Swiostek, W. H. Sillekens, P.-J. Vet, D. Letzig, and K. U. Kainer | Magnesium Technology 2005, p. 241 | Link to 2005 Proceedings |
"The Role of Rare Earth Elements in Structure and Property Control of Magnesium Die Casting Alloys" | P. Bakke and H. Westengen | Magnesium Technology 2005, p. 291 | Link to 2005 Proceedings |
"Metallurgical Background to the Development of Creep Resistant Gravity Casting Magnesium Alloys" | B. Bronfin, M. Katsir, O. Bar-Yosef, F. Moll and S. Schumann | Magnesium Technology 2005, p. 395 | Link to 2005 Proceedings |
"Magnesium Diecasting Alloys for High Temperature Applications" | M. O. Perguleryuz and A. A. Kaya | Magnesium Technology 2004, p. 281 | Read the Full Paper |
"New Magnesium Alloy for Aerospace and Specialty Applications" | P. Lyon | Magnesium Technology 2004, p. 311 | Read the Full Paper |
"Enhanced Ductility and Strength Through RE Addition to Magnesium Die Casting Alloys" | P. Bakke, K. Pettersen and H. Westengen | Magnesium Technology 2003, p. 171 | Read the Full Paper |
"Dead Sea Magnesium Alloys Newly Developed for High Temperature Applications" | E. Aghion, B. Bronfin, F. Von Buch, S. Schumann and H. Friedrich | Magnesium Technology 2003, p. 177 | Read the Full Paper |
"Magnesium Diecasting Alloy AJ62x with Superior Creep Resistance, Ductility and Diecastability" | M. Perguleryuz, P. Labelle, D. Argo and E. Baril | Magnesium Technology 2003, p. 201 | Read the Full Paper |
"AMC-SC1:  An Elevated Temperature Magnesium Alloy Suitable for Precision Sand Casting of Powertrain Components" | C. J. Bettles, C. T. Forwood, D. H. StJohn, M. T. Frost, D. S. Jones, M. Qian, G-L. Song, J. R. Griffiths and J. F. Nie | Magnesium Technology 2003, p. 223 | Read the Full Paper |
"Magnesium for Crashworthy Components" | T Abbott, M. Easton and R. Schmidt | Magnesium Technology 2003, p. 227 | Read the Full Paper |
"Magnesium Wrought Alloys for Automotive Applications" | R. Gradinger and P. Stolfig | Magnesium Technology 2003, p. 231 | Read the Full Paper |
"Elevated Temperature Mg-Al-Sr:  Creep Resistance, Mechanical Properties, and Microstructure" | E. Baril, P. Labelle, and M. O. Pekguleryuz | JOM, November 2003, p. 34 | Read the Full Paper |
"Improving the Strength and Ductility of Magnesium Die-Casting Alloys via Rare-Earth Addition" | Per Bakke, Ketil Pettersen, and Håkon Westengen | JOM, November 2003, p. 46 | Read Full Paper |
"New Die-Casting Alloy MRI153 For Power-Train Applications" | F. von Buch, S. Schumann, H. Friedrich, E. Aghion, B. Bronfin, B. L. Mordike, M. Bamberger and D. Eliezer | Magnesium Technology 2002, p. 61 | Read the Full Paper |
"Process Parameters and Diecasting of Noranda's AJ52 High Temperature Mg-Al-Sr Alloy" | D. Argo, M. Pekguleryuz, P. Labelle, P. Vermette, R. Bouchard and M. Lefebvre | Magnesium Technology 2002, p. 87 | Read the Full Paper |
"Microstructure and Creep Behavior of a Die Cast Magnesium-Rare Earth Alloy" | I. P. Moreno, T. K. Nandy, J. W. Jones, J. E. Allison and T. M. Pollock | Magnesium Technology 2002, p. 111 | Read the Full Paper |
"Development of Creep Resistant Mg-Al-Sr Alloys" | Mihriban O. Pekguleryuz and Eric Baril | Magnesium Technology 2001, p. 119 | Read Full Paper |
"Effect of Sb on the Microstructure and Mechanical Properties of AZ91 Magnesium Alloy" | Qudong Wang, Wenzhou Chen, Wenjiang Ding, Yanping Zhu, and M. Mabuchi | Metallurgical and Materials Transactions A, Vol 32A, March 2001, p. 787 | Read Abstract |
"Magnesium Alloy Development Guided by Thermodynamic Calculations" | J. Groebner, D. Kevorkov, R. Schmid-Fetzer | Magnesium Technology 2001, p. 105 | Read the Full Paper |
"Tensile and Compressive Creep of Magnesium-Aluminum-Calcium Based Alloys" | A. Luo and B. R. Powell | Magnesium Technology 2001, p. 137 | Read the Full Paper |
"Characteristics and Perspectives of New Magnesium-Lithium Alloys-An Approach Towards LAE" | H. Haferkamp, U. Holzkamp, P. Juchmann, V. Kaese, M. Niemeyer, and P.-T. Tai | Magnesium Technology 2000, p. 161 | Read the Full Paper |
"Design Magnesium Alloys:  How Computational Thermodynamics Can Help" | Z.-K. Liu | Magnesium Technology 2000, p. 191 | Read the Full Paper |
"Develoment of High Creep–Resistant Magnesium Alloy Strengthened by Ca Addition" | T. Horie, H. Iwahori, Y. Seno, and Y. Awano | Magnesium Technology 2000, p. 261 | Read the Full Paper |
"AM-Lite and AM-HP2 - New Magnesium Alloys Offer New Opportunities" | Thomas Sweder | SAE 2006 World Congress & Exhibition, April 2006. Session: Achieving Lightweight Vehicles (Part 1 of 2) | Read Abstract |
"Rational Selection of Mg Concentration Specifications for 319-Type Alloys" | Jacob W. Zindel, K. A. Kofeldt, Larry Alan Godlewski, Ravi Vijayaraghavan, William T. Donlon | SAE 2006 World Congress & Exhibition, April 2006. Session: Advances in Lightweight Materials - Casting (Part 1 of 2) | Read Abstract |
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | | | |