Selected Readings: Magnesium Modeling and Simulation

Provided Courtesy of Materials Technology@TMS

For additional resources, visit
http://www.materialstechnology.org

| | | |
| | |

The following are selected readings for magnesium modeling and simulation reviewed by an advisory group of | | |
TMS subject matter experts | | |
| | |
| | |
| | |
| | | | |
PAPER TITLE | AUTHOR(S) | SOURCE | MORE | |

"Numerical Modeling of Large Strain Deformation in Magnesium Alloy AM30" | J. Levesque, K. Inal, K. W. Neale, A. Luo, R. K. Mishra, and L. Jaing | Magnesium Technology 2007, p. 11 | Link to 2007 Proceedings | |
"Simulation of Hot Rolling of Magnesium Strip by Using Finite Element Technique" | E. Essadiqi, G. Shen, C. Galvani, K. Spencer, A. Elwazri, and S. Yue | Magnesium Technology 2007, p. 59 | Link to 2007 Proceedings | |
"Prediction of Variability in Mechanical Properties Based on Microstructural Simulation and Finite Element Based Computations" | S. G. Lee, A. Sreeranganathan and A. Gokale | Magnesium Technology 2007, p. 357 | Link to 2007 Proceedings | |
"Constitutive Bahavior of Wrought Magnesium Alloy AZ61" | F. Sloof, J. Zhou, J. Duszczyk and L. Katgerman | Magnesium Technology 2007, p. 363 | Link to 2007 Proceedings | |
"Integrated Computational Materials Engineering:  A New Paradigm for the Global Materials Profession" | J. Allison, D. Backman, L. Christodoulou | JOM, November 2006, p. 25 | Read the Full Paper | |
"Numerical Modeling of Large Strain Deformation in Magnesium" | J. Levesque, K. Inal, K.W.Neale, R. K. Mishra, and A. A. Luo | Magnesium Technology 2006, p. 239 | Link to 2006 Proceedings | |
"Development and Validation of an Extrusion Limit Diagram for AZ31 Magnesium Alloy" | Y. Wang, X. Zeng, W. Ding, A. A. Luo, and A. K. Sachdev | Magnesium Technology 2006. p. 245 | Link to 2006 Proceedings | |
"Thermodynamic Modeling of the Mg-Sn-Zn-Al System and Its Application to Mg Alloy Design" | I.-H. Jung, W.-J. Park, S.-H. Ahn, D.-H. Kang, and N. J. Kim | Magnesium Technology 2006, p. 457 | Link to 2006 Proceedings | |
"Two-Stage Thermodynamic Modeling of a Thixoforming Process" | M. B. Djurdjevic, and R. Schmid-Fetzer | Magnesium Technology 2006, p. 469 | Link to 2006 Proceedings | |
"Numerical Simulations of Radiative Heat Transfer Between High-Temperature Fluidized Beds and Magnesium Castings" | S. Bakhtiyarov | Magnesium Technology 2005, p. 133 | Link to 2005 Proceedings | |
"A Mathematical Model of Heat Transfer and Fluid Flow in the Direct Chill Casting of AZ31 Magnesium Bilets" | E. H. Lu, D. M. Maijer, H. Hao, and D. Sediako | Magnesium Technology 2005, p. 235 | Link to 2005 Proceedings | |
"Numerical Simulations and Experimental Study of Hot Core Distortion Phenomenon in Magnesium Casting" | S. Bakhtiyarov, J. Capps, R. Overfelt, and D. Weiss | Magnesium Technology 2005, p. 365 | Link to 2005 Proceedings | |
"Numerical Simulation of Natural Convection in Magnesium Alloy Squeeze Casting" | A. Yu, N. Li and H. Hu | Magensium Technology 2003, p. 119 | Read the Full Paper | |
"Creep Resistant Mg-Al-Ca Alloys: Computational Thermodynamics and Experimental Investigation" | Koray Ozturk, Yu Zhong, Alan A. Luo, and Zi-Kui Liu, JOM, November 2003 | JOM, November 2003, p. 40 | Read the Full Paper | |
"Modelling of the Thermo-Physical and Physical Properties for Solidification of Mg-Alloys" | N. Saunders, X. Li, A. P. Miodownik, and J.-P. Schille | Magensium Technology 2003, p. 135 | Read the Full Paper | |
"A Computational Thermodynamic Analysis of Atmospheric Magnesium Production" | M. Marshall, Z-K. Liu, and R. Christini | Magensium Technology 2001, p. 17 | Read the Full Paper | |
"Mathematic Modeling of the Magnesium Refining Furnace" | R.T. Bui, R. Hachette, G. Simard, R. Sheng, D. Argo, C. Brochu, M. Smith, and Y.M. Rybukhin | Magnesium Technology 2001, p. 61 | Read the Full Paper | |
"Computational Thermodynamics and Experimental Investigation of Mg-Al-Ca Alloys" | K. Ozturk, Y. Zhong, z-K. Liu, and A.A. Luo | Magnesium Technology 2001, p. 113 | Read the Full Paper | |
"Magnesium Alloy Development Guided by Thermodynamic Calculations" | J. Groebner, D. Kevorkov, R. Schmid-Fetzer | Magnesium Technology 2001, p. 105 | Read the Full Paper | |
"Qualitative Model for Creep of AZ91D Magnesium Alloy" | M. Regev, A. Rosen, and M. Bamberger | Metallurgical and Materials Transactions A, June 2001, p. 1335 | Read Abstract | |
"Design Magnesium Alloys: How Computational Thermodynamics Can Help" | Z-K. Liu | Magnesium technology 2000, p. 191 | Read the Full Paper | |
"Computer Simulation of High Pressure Die Casting of Magnesium Engine Cradle" | Adrian R. Conrad, Martin McLaughlin, Chung-Whee Kim | SAE 2005 World Congress & Exhibition, April 2005. Session: CAD/CAM/CAE Technology- Design/Product and Process/Manufacturing (Part 1 & 2 of 3) | Read Abstract | |
| | | | | |