TMS Logo

Second International Symposium on Microalloyed Bar & Forging Steel: Tuesday AM Session

July 8-10, 1996 · Golden, Colorado


When: July 9, 1996
Session Chairs: R. Larson, Eaton Corporation, T Cona, PO Box 4013, Kalamazoo, MI 49003; G. Mochnal (FIERF/FIA), 25 Prospect Avenue West, Suite 300, Cleveland, OH 44115, USA
8:00 am
"OVERVIEW OF THE HOT DEFORMATION OF MICROALLOYED FORGING STEELS:" G. Velarde, C. J. Van Tyne, ASPPRC, Colorado School of Mines, Golden, CO 80401, USA; Yi-Wen Chen, NIST, 325 Broadway, Boulder, CO 80303, USA

8:25 am
"FLOW BEHAVIOR OF TWO MEDIUM CARBON V-Ti-Al MICROALLOYED STEELS UNDER HOT WORKING CONDITIONS:" J. M. Cabrera, ESIQIE-Institutom Politecnico, Nacional, Ap. Postal 75-874, CP-07300, Mexico; A. Al. Omar, J. J. Jonas, J. M. Prado, Universidad Politecnica de Catalunya, ETSEIB-UPC, Av.Diagonal, 647, 08028-Barcelona, Spain

8:50 am
"OPTIMIZATION OF FERRITE-PEARLITE MICROSTRUCTURES OF VANADIUM-TREATED MEDIUM-CARBON STEELS BY MEANS OF MATHEMATICAL MODELLING OF FORGING PROCESS:" R. Kuziak, Institute for Ferrous Metallurgy, Materials Science Department, ul. Karola Miarki 12, 44-100 Gliwice, Poland; Y.W. Cheng, NIST, 325 Broadway, Boulder, CO 80303, USA; M. Pietrzyk, Academy of Mining and Metallurgy, Poland

9:15 am
"COMPUTER APPROACHES TO MICROSTRUCTURAL SIMULATION IN BAR ROLLING AND FORGING OF STEELS:" R. Shivpuri, The Ohio State University, Dept. of Industrial, Welding, and Systems Engineering, 210 Baker Systems, 1971 Neil Avenue, Columbus, OH 43210-1271, USA

9:40 am
"AN ADVANCED HIGH STRENGTH GRAPHITIZED STEEL FOR MACHINING AND COLD FORGING USES: T. Iwamoto, T. Hoshino, K. Amano, Y. Nakano, Kawasaki Steel Corporation, Technical Research Laboratories, Kawasakidori 1-chome, Mizushima, Kurashiki, Okayama 712, Japan

10:05 am

10:20 am
"MICROALLOY STEEL IN HIGH PRODUCTION RATE FORGING ENVIRONMENT:" A. K. Hingwe, Masco Tech Forming Technologies, 2727 W. 14 Mile Road, Royal Oak, MI 48073, USA; P. H. Wright, Chaparral Steel Company, 300 Ward Road, Midlothian, TX 76065, USA

10:45 am
"FORGED MICROALLOYED STEEL CRANKSHAFTS FOR AUTOMOTIVE ENGINES:" Christian Tinius, Krupp-Hoesch-Automotive, Germany; R. Mrdjenovich, Ford Motor Company, 24189 Allen Road, Woodhaven, MI 48183, USA

11:10 am
"PROCESSING, PRACTICAL APPLICATIONS AND BENEFITS OF WARM FORGING A 0.30 PCT. CARBON MICROALLOYED STEEL:" N. E. Aloi, Jr, The Timken Company, 1835 Dueber Avenue, S. W., Canton, OH 44706, USA; S. Julian, MSP Industries Corporation, USA

11:35 am
"TEMPERATURE CONTROL OF INDUCTION HEATING FOR MICROALLOYED FORGING STEELS:" W. F. Peschol, American Induction Heating Corporation, 33842 James J. Pompo Drive, PO Box 248, Fraser, MI 48026, USA

12:10 pm

The information on this page is maintained by TMS Customer Service Center (

Search TMS Meetings Page About TMS TMS OnLine