TMS2019 Professional Development Events

Additive Manufacturing Materials and Processes

Sunday, March 10, 2019
8:00 a.m. to Noon
San Antonio, Texas
Sponsored by:
TMS Additive Manufacturing Committee; TMS Powder Materials Committee
David L. Bourell, University of Texas at Austin; Sudarsanam Suresh Babu, University of Tennessee-Knoxville and Oak Ridge National Laboratory; Jack Beuth, Carnegie Mellon University; Kirk Rogers, The Barnes Group Advisors


Additive manufacturing (AM) has become popular in the last few years, although seminal developments took place 25–30 years ago. The purpose of this workshop is to familiarize participants with current AM processes; current AM practice for metals, polymers, and ceramics; modeling of AM processes, microstructural evolution, and service properties; and current challenges and research opportunities.

Who Attends?

This workshop is designed for people in the materials community already familiar with AM processes who want to learn more. Academics and researchers will also benefit from discussions about current challenges to the full adoption of AM.

Learning Objectives

Participants will become familiar with current AM processes and future directions.

Instructor Biographies

David L. Bourell is the Temple Foundation Professor of Mechanical Engineering at the University of Texas at Austin. He is currently director of the Laboratory for Freeform Fabrication. Bourell’s areas of research include particulate processing with emphasis on sintering kinetics and densification, and materials issues associated with laser sintering (LS). He holds nine primary patents dealing with materials innovations in LS dating back to 1990 and has published more than 200 papers in journals, conference proceedings, and book chapters. Bourell is a leading expert in advanced materials for LS, having worked in this area since 1988. He was the lead author on the original materials patent for LS technology. Issued in 1990, this patent has been cited by 150 other patents. Bourell is a Fellow of ASM International and TMS, and a lifetime member of TMS. In 2009, he received the TMS Materials Processing & Manufacturing Division Distinguished Scientist/Engineer Award.

Sudarsanam Suresh Babu holds the University of Tennessee/Oak Ridge National Laboratory (UT/ORNL) governor’s chair in advanced manufacturing at the University of Tennessee, Knoxville, and serves in the Department of Mechanical, Aerospace, and Biomedical Engineering. Babu has a joint professorship with the Department of Materials Science and Engineering (MSE). As a governor's chair, he leads basic and applied research in a wide range of additive and other advanced manufacturing processes, including product design implications in collaboration with industry, faculty, and students at UT as well as with researchers at the Manufacturing Demonstration Facility (MDF) at ORNL. Babu has published more than 150 journal papers and numerous conference proceedings.

Jack Beuth is professor of mechanical engineering at Carnegie Mellon University (CMU). Beuth received his Ph.D. in engineering sciences from Harvard University in 1992 and has been on the CMU faculty since that time. Beuth’s research is in the disciplines of solid mechanics, heat transfer, and manufacturing, with over 75 publications across the areas of additive manufacturing, interfacial mechanics, thin film mechanics and fracture mechanics. His current research includes modeling of additive manufacturing (AM) processes, the study of micro-scale strength size effects in MEMS materials, and research in education. In 2000, he was awarded the George Tallman and Florence Barrett Ladd Development Professorship in Mechanical Engineering at CMU. In 2005, Beuth was co-recipient of the ASME Curriculum Innovation Award. In 2009, he received the Benjamin Richard Teare Teaching Award from the CMU College of Engineering.

Kirk Rogers has used additive technologies to solve manufacturing, repair, and supply chain problems for the last ten years. He recently was the technical leader on the startup of a $40M Additive Manufacturing R&D center, the culmination of a nearly 20-year career at GE and is now Senior ADDvisor℠ at the Barnes Group Advisors. The majority of Rogers’s career has been in the medical device manufacturing realm, where he built manufacturing lines for and qualified numerous products. Rogers has 25 years of experience in materials processing and business strategy, including metal powder production, novel joining methods, metal additive manufacturing, novel refractory alloys, sustainable manufacturing, carbon composite materials, powder metallurgy, technology portfolio management, identification and application of new process methodologies, and development of patent and technology strategy. Rogers has obtained three U.S. patents, and has filed more than 20 trade secrets and patent applications. He obtained his B.S. in Materials Engineering from Case Western Reserve University and Ph.D in Materials Science and Engineering from Purdue University. He completed postdoctoral work at The Ohio State University and is a certified Six Sigma Blackbelt.

Registration Rates

Registering As Advance Registration Rate
(on or before February 1)
Standard Registration Rate
(after February 1)
Member  $250 $275
Non-member  $275 $300
Student  $200 $225