T. Altan, Ohio State University (USA)
J. Alwood, Cambridge University (UK)
J. Alves, Instituto Superior Técnico (Portugal)
C. Angelet de Saracibar, Universitat de Barcelona (Spain)
H. Aretz, Hydro (Germany)
T. Balan, École Nationale Supérieure d’Arts et Métiers Metz (France)
D. Banabic, Universitatea Tehnică din Cluj-Napoca (Romania)
F. Barlat, Pohang University of Science and Technology (Korea)
G.F. Bathala, Universidade de São Paulo (Brazil)
K.-J. Bathe, Massachusetts Institute of Technology (USA)
B.-A. Behrens, Leibniz Universität Hannover (Germany)
P. Boisse, Institut National des Sciences Appliquées de Lyon (France)
P.-O. Bouchard, Centre de Mise en Forme des Matériaux (France)
M. Brunig, Universität der Bundeswehr München (Germany)
S. Bruschi, Università degli Studi di Padova (Italy)
J. Cao, Northwestern University (USA)
R.P.R. Cardoso, University of the West of England Bristol (UK)
O. Cazacu, University of Florida (USA)
E. Ceretti, Università degli Studi di Brescia (Italy)
J. Cesar de Sa, Universidade do Porto (Portugal)
F.K. Chen, Taipei University (Taiwan)
J. Chen, Shanghai Jiaotong University (China)
F. Chinesta, École Nationale Supérieure d’Arts et Métiers ParisTech (France)
S. Coppieters, Katholieke Universiteit Leuven (Belgium)
G. Daehn, Ohio State University (USA)
K. Danas, Ecole Polytechnique (France)
K. Davey, University of Manchester Institute of Science and Technology (UK)
P.M. Dixit, Indian Institute of Technology Kanpur (India)
J. Duflou, Katholieke Universiteit Leuven (Belgium)
L. Fratini, Università degli Studi di Palermo (Italy)
T. Furushima, University of Tokyo (Japan)
M.G.D Geers, Technische Universiteit Eindhoven (Netherlands)
B. Geijselaers, Universiteit Twente (Netherlands)
A. Gilat, Ohio State University (USA)
S. Golovashchenko, Oakland University (USA)
D. Green, University of Windsor (Canada)
P. Groche, Technische Universität Darmstadt (Germany)
A.M. Habraken, Université de Liège (Belgium)
T. Hama, Kyoto University (Japan)
G. Hirt, Rheinisch-Westfälische Technische Hochschule Aachen (Germany)
P. Hora, Eidgenössische Technische Hochschule Zürich (Switzerland)
P. Hu, Dalian University (China)
H. Huh, Korea Advanced Institute of Science and Technology (Korea)
S.M. Hwang, Pohang University of Science and Technology (Korea)
Y.M. Hwang, SunYi (Taiwan)
K. Inal, University of Waterloo (Canada)
A. Jacot, Brunel University (UK) and Calcom-ESI (Switzerland)
B. Kaftanoglu, Atilim Üniversitesi (Turkey)
J.H. Kim, Pusan National University (Korea)
H. Kim, EWI (USA)
M. Koc, Hamad Bin Khalifa University (Qatar)
J. Kusiak, Akademia Górniczo-Hutnicza Krakow (Poland)
T. Kuwabara, Tokyo University of Agriculture and Technology (Japan)
S. Kyriakides, University of Texas at Austin (USA)
M.-G. Lee, Seoul National University, (Korea)
P. L'Eplattenier, Livermore Software Technology Corporation (USA)
D. Y. Li, Shanghai Jiaotong University (China)

J. Li, Pennsylvania State University (USA)
M. Liewald, Institut für Umformtechnik, Universität Stuttgart (Germany)
L-E. Lindgren, Luleå Tekniska Universitet (Sweden)
G. Liu, Harbin Institute of Technology (China)
R. Loge, École Polytechnique Fédérale de Lausanne (Switzerland)
Y. Lou, Xian Shiaotong University (China)
G. Lubineau, King Abdullah University of Science and Technology (Saudi Arabia)
C. Maier, Universitatea din Galați (Romania)
P.Y. Manach, UBS (France)
A. Maniatty, Rensselaer Polytechnic Institute (USA)
P.A.F. Martins, Universidade de Lisboa (Portugal)
E. Massoni, Centre de Mise en Forme des Matériaux (France)
S. Mates, National Institute of Standards and Technology (USA)
K. Mattiasson, Chalmers Tekniska Högskola (Sweden)
M. Merklein, Friedrich-Alexander-Universität Erlangen-Nürnberg (Germany)
F. Micari, Università degli Studi di Palermo (Italy)
W. Misiolek, Lehigh University (USA)
D. Mohr, Eidgenössische Technische Hochschule Zürich (Switzerland)
P. Montmitonnet, Centre de Mise en Forme des Materiaux (France)
O. Music, Atilim Üniversitesi (Turkey)
K. Narasimhan, Indian Institute of Technology Bombay (India)
G. Ngaile, North Carolina State University (USA)
K.B. Nielsen, Aalborg Universitet (Denmark)
V. Oancea, Dasault Systemes Simulia (USA)
M. Oldenburg, Luleå Tekniska Universitet (Sweden)
G. Palumbo, Politecnico di Bari (Italy)
J.-P. Ponthot, Université de Liège (Belgium)
F. Pourboghrat, Ohio State University (USA)
K.S. Raghavan, AK Steel, (USA)
Ł. Rauch, Akademia Górniczo-Hutnicza (Poland)
K. Ravi-Chandar, University of Texas at Austin (USA)
S. Reese, Rheinisch-Westfälische Technische Hochschule Aachen (Germany)
S. Roy, Altair (USA)
S. Sadagopan, ArcelorMittal (USA)
A.D. Santos, Universidade do Porto (Portugal)
J. Sherwood, University of Massachusetts Lowell (USA)
M.F. Shi, U.S. Steel (USA)
J. Signorelli, Universidad Nacional de Rosario (Argentina)
B. Silva, Instituto Superior Técnico (Portugal)
D. Steglich, Helmholtz Zentrum (Germany)
T. Stoughton, General Motors (USA)
A.E. Tekkaya, Technische Universität Dortmund Institut für Umformtechnik und Leichtbau (Germany)
S. Thuillier, Université de Bretagne-Sud (France)
F. Trochu, Polytechnique Montréal (Canada)
R. Valente, Universidade de Aveiro (Portugal)
C. Vallellano, Universidad Seville (Spain)
A.H. van den Boogaard, Universiteit Twente (Netherlands)
C.J. Van Tyne, Colorado School of Mines (USA)
M. Vaz Junior, Universidade de Santa Catarina (Brazil)
G.-C. Vosniakos, National Technical University of Athens (Greece)
M. Worswick, University of Waterloo (Canada)
P. Wu, McMaster University (Canada)
X. Wu, Wayne State University (USA)
J. Yanagimoto, University of Tokyo (Japan)
L. Yao, Columbia University (USA)
J.-W. Yoon, Deakin University (Australia) and Korea Advanced Institute of Science and Technology (Korea)
H.-L. Yu, Wollogong University (Australia) and Central South University (China)
P. Zeng, Tsinghua University (China)