2019
-
Acta Materialia Undergraduate Scholarship
Keith Coffman -
View Details
- Title: Student
- Affiliation: Georgia Institute of Technology, Atlanta, GA
- Quote: JOM has been instrumental in my keeping abreast of current accomplishments and challenges in my field. The resources made available by TMS, such as the Modelling Across Scales report are extremely valuable as they compile information on current techniques and challenges in a field, keeping students and professionals up to speed. I have also actively perused the website (chiefly for scholarship and internship opportunities), which has not only resulted in the generous support of the Acta Materialia scholarship, but also opportunities to appreciate what peers are accomplishing. The job board is a good sanity check for what hiring companies and universities seek. I have had few opportunities to participate in national conferences, so I hope to participate in the TMS Annual Meeting & Exhibition in March 2019. All-in-all, the resources and networking opportunities afforded by active membership in TMS have been extremely supportive of my educational and career goals. I am completing my final year as an undergraduate student in materials science and engineering at Georgia Institiute of Technology; after graduating I intend to pursue a Ph.D. in materials science. I will focus on computation and multiscale simulation of material properties from first principles, and I hope to apply my skills to solve energy generation and storage challenges, among many others.
|
2019
-
Acta Materialia Undergraduate Scholarship
Rafael Rodriguez De Vecchis -
View Details
- Title: Student
- Affiliation: University of Pittsburgh, Pittsburgh, PA
- Quote: TMS and Material Advantage have provided me with both an excellent academic environment where I can share my passion for materials science with my fellow classmates, as well as with very much needed economic support that allows me to move forward in my engineering career. All this support has encouraged me to keep pursuing my aspirations for graduate school, proceeding with a Ph.D. program in materials science, with the purpose of becoming a professor, strongly committed to improve teaching by inspiring students to reach their full potential and dreams, and developing in collaboration with industry, new scientific and technological knowledge on new materials that can improve society and guarantee a sustainable future for the next generations.
|
2019
-
AIME Champion H. Mathewson Award
Irene Beyerlein -
View Details
- Title: Professor
- Affiliation: University of California Santa Barbara, Santa Barbara, CA
- Other: "Elevated Temperature Effects on the Plastic Anisotropy of an Extruded Mg-4 Wt Pct Li Alloy: Experiments and Polycrystal Modeling," Metalurgical Transactions A, January 2017.
|
2019
-
AIME Champion H. Mathewson Award
Ana Casanova-Gomez -
View Details
- Title: Student
- Affiliation: University of Cambridge, Madrid, Spain
- Quote: I am very honored to share this award with a team of great professionals that I deeply admire. I gave my first steps in the world of materials science with this project during my master’s thesis, and it could not have been a better academic or personal experience. It is therefore exceptionally rewarding to receive this recognition for the work (and most especially the people) that first inspired my curiosity for metallurgy and materials research.
- Other: "Microstructural Features Controlling the Variability in Low-Cycle Fatigue Properties of Alloy Inconel 718DA at Intermediate Temperature," Metallurgical Transactions A, March 2016.
|
2019
-
AIME Champion H. Mathewson Award
Jonathan Cormier -
View Details
- Title: Associate Professor
- Affiliation: ISAE-ENSMA and Institut Pprime, Futuroscope Chasseneuil, France
- Quote: TMS is my “materials family”. TMS allowed me to network with colleagues all around the world and for me, TMS is the leading organization for dissemination of scientific knowledge through its journals and conferences.This award is a recognition of a long term activity and collaboration between Institut Pprime and SAFRAN on the analysis of fatigue variability in high strength disk superalloys for rotating components in gas turbines. More recently, this collaboration has been extended to the University of California, Santa Barbara in the framework of Damien Texier post-doc, with decisive contributions by all partners.
- Other: "Microstructural Features Controlling the Variability in Low-Cycle Fatigue Properties of Alloy Inconel 718DA at Intermediate Temperature," Metallurgical Transactions A, March 2016.
|
2019
-
AIME Champion H. Mathewson Award
Christoph Fahrenson -
View Details
- Title: Technical staff Member
- Affiliation: Technical University of Berlin, Berlin, Germany
- Other: "Elevated Temperature Effects on the Plastic Anisotropy of an Extruded Mg-4 Wt Pct Li Alloy: Experiments and Polycrystal Modeling," Metalurgical Transactions A, January 2017.
|
2019
-
AIME Champion H. Mathewson Award
Jean-Michel Franchet -
View Details
- Title: Materials & Processes Engineer
- Affiliation: SAFRAN Tech, Magny-les-Hameaux, France
- Quote: This award recognizes of a long term collaboration between Institut Pprime and Safran on metallurgical and mechanical studies concerning high strength disk superalloys for rotating components in gas turbines.
- Other: "Microstructural Features Controlling the Variability in Low-Cycle Fatigue Properties of Alloy Inconel 718DA at Intermediate Temperature," Metallurgical Transactions A, March 2016.
|
2019
-
AIME Champion H. Mathewson Award
Marko Knezevic -
View Details
- Title: Associate Professor
- Affiliation: University of New Hampshire, Durham, NH
- Quote: I am honored and grateful for the nomination and selection of the paper for the award. Research efforts and accomplishments being recognized and rewarded by the TMS community always positively influences the professional development of its members. This award is a motivation for me to continue the good work and remain within the network of TMS members.
- Other: "Elevated Temperature Effects on the Plastic Anisotropy of an Extruded Mg-4 Wt Pct Li Alloy: Experiments and Polycrystal Modeling," Metalurgical Transactions A, January 2017.
|
2019
-
AIME Champion H. Mathewson Award
Martin Lentz -
View Details
- Title: Project Manager
- Affiliation: Hydro Aluminium Rolled Products GmbH, Bonn, Germany
- Other: "Elevated Temperature Effects on the Plastic Anisotropy of an Extruded Mg-4 Wt Pct Li Alloy: Experiments and Polycrystal Modeling," Metalurgical Transactions A, January 2017.
|
2019
-
AIME Champion H. Mathewson Award
Stephane Pierret -
View Details
- Title: Engineer
- Affiliation: SAFRAN Aircraft Engines, Paris, France
- Other: "Microstructural Features Controlling the Variability in Low-Cycle Fatigue Properties of Alloy Inconel 718DA at Intermediate Temperature," Metallurgical Transactions A, March 2016.
|
2019
-
AIME Champion H. Mathewson Award
Tresa Pollock -
View Details
- Title: Professor
- Affiliation: University of California, Santa Barbara, Santa Barbara, CA
- Quote: For Safran, this award is clearly a recognition of the very high scientific level of the institut Pprime on these items.
- Other: "Microstructural Features Controlling the Variability in Low-Cycle Fatigue Properties of Alloy Inconel 718DA at Intermediate Temperature," Metallurgical Transactions A, March 2016.
|
2019
-
AIME Champion H. Mathewson Award
Walter Reimers -
View Details
- Title: Professor
- Affiliation: Technical University of Berlin, Berlin, Germany
- Other: "Elevated Temperature Effects on the Plastic Anisotropy of an Extruded Mg-4 Wt Pct Li Alloy: Experiments and Polycrystal Modeling," Metalurgical Transactions A, January 2017.
|
2019
-
AIME Champion H. Mathewson Award
Marcel Risse -
View Details
- Affiliation: BSH Home Appliances Corp, Berlin, Germany
- Quote: I feel very honored as recipient of the AIME Champion H. Matheson Award. It is a strong motivation and strengthening for further technical projects in the field of metallurgical and material science. Receiving the AIME Champion H. Matheson Award is also a chance for me to motivate new corporations with research partnerships and development companies from engineering point of view.
- Other: "Elevated Temperature Effects on the Plastic Anisotropy of an Extruded Mg-4 Wt Pct Li Alloy: Experiments and Polycrystal Modeling," Metalurgical Transactions A, January 2017.
|
2019
-
AIME Champion H. Mathewson Award
Damien Texier -
View Details
- Title: CNRS Researcher
- Affiliation: Institut Clement Ader - UMR CNRS, Jarlard, Albi, France
- Quote: In my opinion, TMS is the most global network that gathers active researchers( academics and industrials) in any fields of materials science (and even more). It is a source of science dissemination and valorization through high quality journals, proceeding books, and conferences. Since I recently obtained a permanent academic position, I will now be proud to be part of TMS and participate in this effervescent community. This award is a great honor that recognizes starting research activities with colleages I particularly appreciate from Pprine, UCSB and SAFRAN via a Postdoctoral fellow's position. This rewards a strong, long-term and ongoing relations built between the three partners on the understanting of fatigue variability in Ni-based superalloys using micromechanical approaches.
- Other: "Microstructural Features Controlling the Variability in Low-Cycle Fatigue Properties of Alloy Inconel 718DA at Intermediate Temperature," Metallurgical Transactions A, March 2016.
|
2019
-
AIME Champion H. Mathewson Award
Patrick Villechaise -
View Details
- Title: Senior Researcher
- Affiliation: Institut Pprime - CNRS, Futuroscope Chasseneuil, France
- Quote: This is a nice recognition for an experimental study developed in collaboration between the Safran company and two research teams (UCSB in the United States and Pprime Institute in France). It concludes very well the post doc position of D. Texier who had a central contribution on both sites. This is also interesting to receive an award for an equilibrated study between very fine experimental developments especially with in situ SEM tests and a direct applicative study on the fatigue life variability of the largely used INCONEL 718 DA alloys in turbo machines.
- Other: "Microstructural Features Controlling the Variability in Low-Cycle Fatigue Properties of Alloy Inconel 718DA at Intermediate Temperature," Metallurgical Transactions A, March 2016.
|
2019
-
AIME Henry deWitt Smith Scholarship
Brady Dowdell -
View Details
- Title: Student
- Affiliation: North Carolina State University, Raleigh, NC
- Quote: In the first year of my Ph.D., I joined Material Advantage and TMS to start making professional connections, and learn more about the different career paths open to me. As a result, I have not only made several local connections with industry professionals at Material Advantage meetings, but have been provided the opportunity to share my research with a broader audience at TMS conferences. In addition, I have also been afforded opportunities to conduct research on multiple projects that aren’t directly related to my Ph.D. research as a result of attendance at Material Advantage meetings. This extra experience has not only improved my confidence and competence in the techniques required to conduct my research, but has also helped me determine what career path I wish to take. After graduation, I plan on pursuing a career as an electron microscopist either in industry or for an academic institution.
|
2019
-
AIME Henry deWitt Smith Scholarship
Pranjal Nautiyal -
View Details
- Title: Student
- Affiliation: Florida International University, Miami, FL
- Quote: I started my Ph.D. in Materials Engineering in Fall 2015, and have been a Material Advantage member since then. As a member, I have participated in student contests, received TMS travel grants to attend conferences and interacted with other fellow students and researchers in the materials community. I also chaired the Material Advantage chapter in my university, which has helped me to gain leadership experience, engage in social outreach and get to know successful professionals in my area. I will graduate in Spring 2020 and wish to become a Professor. I like doing research, writing and teaching, and academia would be a perfect career choice for me. TMS has helped me develop skill sets that will be helpful for me to succeed.
|
2019
-
AIME Honorary Membership Award
K. Linga Murty -
View Details
- Title: Professor
- Affiliation: North Carolina State University, Raleigh, NC
- Citation: For his contributions to the materials community through exemplary research and service in nuclear materials, high temperature deformation behavior and nanostructured materials.
|
2019
-
AIME Robert Lansing Hardy Award
Saryu Fensin -
View Details
- Title: Scientist
- Affiliation: Los Alamos National Laboratory, Los Alamos, NM
- Citation: For innovative and scientifically groundbreaking modeling research quantifying the role of grain boundary structure on the dynamic mechanical response of materials.
|
2019
-
AIME Robert Lansing Hardy Award
Nan Li -
View Details
- Title: Staff Scientist
- Affiliation: Los Alamos National Laboratory, Los Alamos, NM
- Quote: I am truly honored to receive the prestigious TMS Robert Lansing Hardy Award. I would like to thank my nominators, my advisor and mentors, my collaborators, the members of the TMS Award Committee, and TMS Foundation for their support. This is a significant milestone in my professional career. TMS is an exciting professional society, and every time I attend the conference, I am inspired by the science and networking opportunities here. I look forward to my continued contributions to this Society.
- Citation: For elucidating the deformation mechanisms and irradiation response of nano-metals via in situ TEM nanomechanics.
|
2019
-
Alexander Scott Distinguished Service Award
Robert Hyers -
View Details
- Title: Professor
- Affiliation: University of Massachusetts, Amherst, MA
- Quote: TMS is my main professional home. TMS is where I learned how to participate in a professional society. Volunteering for TMS gave me opportunities to meet most of the colleagues in my professional network, something to do with them so that we could build acquaintance into professional relationships, and once in a while, a chance to make a difference.
- Citation: For over a decade of selfless and dedicated service, and exceptional leadership to TMS through the organizing of Symposia, Committee Memberships, Financial Planning Officer and membership of the Executive Committee and Board of Directors.
|
2019
-
Application to Practice Award
Don Lipkin -
View Details
- Title: Materials Scientist
- Affiliation: General Electric Co, Niskayuna, NY
- Citation: For outstanding contributions to the application of materials science to gas turbine technology, especially on protective coatings that enable benefits in efficiency and environmental impact.
|
2019
-
Brimacombe Medalist
Sean Agnew -
View Details
- Title: Director of Engineering Science Major
- Affiliation: University of Virginia, Charlottesville, VA
- Citation: For outstanding contributions to advancing the scientific understanding of deformation mechanisms and the associated mechanical response of magnesium-based and other metals.
|
2019
-
Brimacombe Medalist
Raymundo Arroyave -
View Details
- Title: Professor
- Affiliation: Texas A&M University, College Station, TX
- Citation: For his leadership in integrating informatics and data science into materials design and for exemplary service to the materials community through his dedication to TMS.
|
2019
-
Brimacombe Medalist
Irene Beyerlein -
View Details
- Title: Professor
- Affiliation: University of California, Santa Barbara, Santa Barbara, CA
- Citation: For groundbreaking work on the plasticity of HCP metals and metal nanocomposites as well as for her commitment to mentorship of the next generation of materials scientists.
|
2019
-
Brimacombe Medalist
Jian Luo -
View Details
- Title: Professor
- Affiliation: University of California, San Diego, La Jolla, CA
- Quote: I am truly honored to receive a TMS Brimacombe Medal. Trained as a ceramist, I am currently working almost equally on metals and ceramics, with a focus on interfaces. One scientific goal is to develop grain boundary ‘phase’ diagrams for both metals and ceramics, as well as both structural and functional materials. TMS offers a wonderful interdisciplinary scientific discussion platform across different types of materials. Participating in technical committees and co-organizing symposia are also highly fruitful experience for me, and TMS is instrumental in helping my career and professional development.
- Citation: For significant contributions of understanding materials interfaces, especially developing grain boundary phase diagrams and uncovering the mysterious mechanisms of liquid metal embrittlement and activated sintering.
|
2019
-
Brimacombe Medalist
Jonathan Spowart -
View Details
- Title: Senior Materials Research Engineer
- Affiliation: United States Air Force, Wright Patterson AFB, OH
- Quote: TMS membership has provided me with unparalleled benefits over a multi-decade career in the materials science profession. I have been an active member of TMS for over 25 years, and as my career has progressed, TMS has been there every step of the way. TMS membership has allowed me to grow substantially and professionally over that time, and has allowed me to make a difference in the lives of others. TMS membership provides a platform and foundation for personal and professional excellence, and has truly enabled me to accomplish those things that the Brimacombe Medal celebrates and recognizes in its recipients. I am extremely happy and genuinely humbled by this prestigious award, and I look forward to serving TMS for many years to come.
- Citation: In recognition of outstanding contributions to the field of materials characterization which have enabled numerous advances in materials science and engineering.
|
2019
-
Brimacombe Medalist
Dallas Trinkle -
View Details
- Title: Associate Professor
- Affiliation: University of Illinois Urbana Champaign, Urbana, IL
- Quote: I am honored to receive this award from TMS. TMS has been my home professional society for fifteen years. I have had many opportunities to present new and exciting results for myself at first and now for my research group. As a ‘bottom-up’ organization, I have enjoyed working with my colleagues in the science and engineering community to develop programming and work for the community. I am honored to receive this recognition from my colleagues, and humbled to join the ranks of Brimacombe medalist awardees.
- Citation: For significant contributions to the prediction of alloying efforts on diffusion, solid solution strengthening and softening and for exemplary service to TMS.
|
2019
-
Bruce Chalmers Award
Dieter Herlach -
View Details
- Title: Full Professor
- Affiliation: German Aerospace Center, Köln, Germany
- Citation: For his key contributions in rapid solidification and solidification experiments under reduced gravity, which have enlightened our understanding of dendritic growth at large undercooling and the influence of convection.
|
2019
-
Cycil Stanley Smith Award
No award given.
- Title:
- Affiliation: ,
- Quote: N/A
- Citation: N/A
- Other: N/A
|
2019
-
Cyril Stanley Smith Award
No award given.
- Title:
- Affiliation: ,
- Quote: N/A
- Citation: N/A
- Other: N/A
|
2019
-
Early Career Faculty Fellow Award
Elsa Olivetti -
View Details
- Title: Assistant Professor
- Affiliation: Massachusetts Institute of Technology, Cambridge, MA
- Quote: TMS membership provides me with the opportunity to connect with colleagues from a range of organizations and backgrounds on topics I'm interested in and am working on. I'm grateful for the opportunity that TMS membership provides me with to build these networks, present my work and the work of my students for feedback, as well as identify new research opportunities and collaborations. TMS membership also provides me with an opportunity to connect my academic work with industry members or move research in a direction that is more valuable to industry. Finally, I'm able to learn about recent critical advances in the field.
- Other: “Data Mining to Guide Synthesis Towards Resource-Effective Materials, Processes and Systems”
|
2019
-
Early Career Faculty Fellow Award
Ashley Spear -
View Details
- Title: Assistant Professor
- Affiliation: University of Utah, Salt Lake City, UT
- Quote: I first joined TMS as a graduate student in 2011. At that time, I was able to start developing a network by attending and presenting at the TMS Annual Meeting & Exhibition. At the meeting, I would always look forward to learning about the latest research in the community and meeting new people. Once I became a faculty member, my network within TMS expanded, and I had the opportunity to serve as a co-organizer (and later lead organizer) for the Fatigue symposium. Through my involvement with the Fatigue symposium, I have served as a guest editor for special issues of two different journals, including JOM. In both cases, I worked closely with presenters from our symposium to help transition their conference presentations to full-length research publications. I am pleased to say that my students are now active in the TMS community and have been presenting their research at the annual meeting for the last few years. I feel extremely fortunate to have found a strong and supportive community in TMS.
- Other: “Data-Driven Materials Science: Successes, Challenges, and Opportunities”
|
2019
-
Ellen Swallow Richards Diversity Award
Michelle Buchanan -
View Details
- Title: Deputy for Science & Technology
- Affiliation: Oak Ridge National Laboratory, Oak Ridge, TN
- Quote: TMS membership and the TMS Foundation benefits me through broad communication of recent advances in materials research, both within the community and to the general public.
- Citation: For her efforts to increase diversity in hiring, exceptional mentoring and advocacy for early career scientists, and tireless dedication to improving workplace culture.
|
2019
-
EPD Distinguished Lecturer Award
Sridhar Seetharaman -
View Details
- Title: Professor and Associate VP for Research
- Affiliation: Colorado School of Mines,
- Quote: Research in materials extraction and processing is of great importance for enabling a responsible use of Earth’s resources since these steps often are the most energy and carbon intensive steps of metals production. The Extraction & Processing Division of TMS has been at the forefront of advancing this area, and to be recognized by my colleagues and peers is a great honor. It is perhaps the best possible encouragement for me as an academic to continue to teach and carry out research in this field.
- Citation: Understanding the kinetics and thermodynamics of high temperature reactions and transformations relevant to processing and performance of metals.
- Other: Lecture Title: "The Importance of Transient Phenomena in Metallurgical Processes"
|
2019
-
EPD Distinguished Service Award
Jiann-Yang Hwang -
View Details
- Title: Professor
- Affiliation: Michigan Technological University, Houghon, MI
- Quote: TMS provides a great platform for me to interact with colleagues from all over the world. I am very honored to receive the 2019 TMS Extraction & Processing Division Distinguished Service Award. This is recognition from my colleagues and the Society. I am very thankful for the support from my family, my department, TMS, my colleagues, and friends. I will continue my efforts to make the Society stronger and more influential.
- Citation: For creative and exceptional contributions and leadership for mineral processing and metallurgy community for over 40 years.
|
2019
-
EPD Materials Characterization Best Paper Award - First Place
Marcelo Andrade -
View Details
- Title: Ironmaking Manager
- Affiliation: ArcelorMittal Global R&D, East Chicago, IN
- Other: "Characterization of HPGR Pre-treated Sinter Feed," TMS 2018: Characterization of Minerals, Metals, and Materials 2018
|
2019
-
EPD Materials Characterization Best Paper Award - First Place
Udaya Kodukula -
View Details
- Title: Lead Engineer
- Affiliation: ArcelorMittal Global R&D, East Chicago, IN
- Other: "Characterization of HPGR Pre-treated Sinter Feed," TMS 2018: Characterization of Minerals, Metals, and Materials 2018
|
2019
-
EPD Materials Characterization Best Paper Award - First Place
Mingming Zhang -
View Details
- Title: Lead Research Engineer
- Affiliation: ArcelorMittal Global R&D, Schererville, IN
- Quote: I am very honored to receive this prestigious EPD best paper award and to be recognized by the TMS Materials Characterization committee. Winning this award means a great deal to our project team and those who have been supporting us for years. The large and diverse team of scholars, engineers, scientists, technicians, and support personnel of TMS has been a great inspiration for our complex and technically challenging program.
- Other: "Characterization of HPGR Pre-treated Sinter Feed," TMS 2018: Characterization of Minerals, Metals, and Materials 2018
|
2019
-
EPD Materials Characterization Best Paper Award - Second Place
Chenguang Bai -
View Details
- Affiliation: Chongqing University, Chongqing, China
- Quote: I am very honored to hear that our paper was granted the TMS-EPD Materials Characterization Best Paper Award - Second Place. TMS is one of the prestigious conferences in the field of minerals, metals and materials. The session on materials characterization is one of the important sessions held by TMS. The honor would be a great motivation of our future work in this field.
- Other: "Applications of Aberration-Corrected Low-Energy Electron Microscopy for Metal Surfaces," TMS 2018: Characterization of Minerals, Metals, and Materials 2018
|
2019
-
EPD Materials Characterization Best Paper Award - Second Place
Xueli Cao -
View Details
- Affiliation: Fujian Institute of Research on the Structure, Fuzhou, China
- Quote: I am very honored to hear that this paper was granted the TMS-EPD Materials Characterization Best Paper Award - Second Place. TMS is one of the most prestigious conferences in the field of minerals, metals and materials. The session on materials characterization is one of the important sessions held by TMS and the award encourages everyone to continue fighting for our career. I sincerely congratulate every member of this team and wish you all can make further progresses
- Other: "Applications of Aberration-Corrected Low-Energy Electron Microscopy for Metal Surfaces," TMS 2018: Characterization of Minerals, Metals, and Materials 2018
|
2019
-
EPD Materials Characterization Best Paper Award - Second Place
Tao Li -
View Details
- Affiliation: Chongqing University, Chongqing, China
- Quote: I am very honored to hear that our paper was granted this recognition. TMS is one of the most significant partners in the field of minerals, metals and materials. The session on materials characterization is one of the important sessions held by TMS. The honor would be a great motivation of our future work in this field.
- Other: "Applications of Aberration-Corrected Low-Energy Electron Microscopy for Metal Surfaces," TMS 2018: Characterization of Minerals, Metals, and Materials 2018
|
2019
-
EPD Materials Characterization Best Paper Award - Second Place
Meng Li -
View Details
- Affiliation: Chongqing University, Chongqing, China
- Quote: I am so honored to hear that our paper was granted the TMS-EPD Materials Characterization Best Paper Award - Second Place. TMS is one of the prestigious conferences in the field of minerals, metals and materials. The session on materials characterization is one of the important sessions held by TMS. This exciting award will encourage us to continue exploration on this promising interdisciplinary field applying the latest in-situ dynamical method with low energy electron microscopy.
- Other: "Applications of Aberration-Corrected Low-Energy Electron Microscopy for Metal Surfaces," TMS 2018: Characterization of Minerals, Metals, and Materials 2018
|
2019
-
EPD Materials Characterization Best Paper Award - Second Place
Guodong Shi -
View Details
- Affiliation: Chongqing University, Chongqing, China
- Quote: Thank you to the Organizing Committee of TMS-EPD for awarding us the Best Paper Award - Second Place. The TMS conference is a very important conference in the field of materials in the world. It's my honor to participate in data collection and analysis in this article. This award will encourage us to study and work more seriously in the future and make greater contributions to scientific research.
- Other: "Applications of Aberration-Corrected Low-Energy Electron Microscopy for Metal Surfaces," TMS 2018: Characterization of Minerals, Metals, and Materials 2018
|
2019
-
EPD Materials Characterization Best Paper Award - Second Place
Wen-xin Tang -
View Details
- Affiliation: Chongqing University, Chongqing, China
- Quote: I am very honored to hear that our paper was granted the TMS-EPD Materials Characterization Best Paper Award - Second Place. TMS is one of the prestigious conferences in the field of minerals, metals and materials. The session on materials characterization is one of the important sessions held by TMS. This well-known award encourages us to continue working on this promising interdisciplinary field that applies the latest surface microscopy methods on the atomic dynamical processes of applied materials.
- Other: "Applications of Aberration-Corrected Low-Energy Electron Microscopy for Metal Surfaces," TMS 2018: Characterization of Minerals, Metals, and Materials 2018
|
2019
-
EPD Materials Characterization Best Paper Award - Second Place
Zheng Wei -
View Details
- Affiliation: Chongqing University, Chongqing, China
- Quote: I am very honored to hear that our paper was granted the TMS-EPD Materials Characterization Best Paper Award - Second Place. TMS is one of the major prestigious conferences in the field of ,inerals, metals and materials. The session on materials characterization is one of the important sessions held by TMS. This well-known award encourages us to continue working on this promising interdisciplinary field that applies the latest surface microscopy methods on the atomic dynamical processes of applied materials.
- Other: "Applications of Aberration-Corrected Low-Energy Electron Microscopy for Metal Surfaces," TMS 2018: Characterization of Minerals, Metals, and Materials 2018
|
2019
-
EPD Materials Characterization Best Paper Award - Second Place
Hanying Wen -
View Details
- Affiliation: Chongqing University, Chongqing, China
- Quote: I am very honored to hear that our paper was granted the TMS-EPD Materials Characterization Best Paper Award - Second Place. TMS is one of the prestigious conferences in the field of minerals, metals and materials. The session on materials characterization is one of the important sessions held by TMS. This well-known award encourages us to continue working on this promising interdisciplinary field that applies the latest surface microscopy methods on the atomic dynamical processes of applied materials.
- Other: "Applications of Aberration-Corrected Low-Energy Electron Microscopy for Metal Surfaces," TMS 2018: Characterization of Minerals, Metals, and Materials 2018
|
2019
-
EPD Materials Characterization Best Paper Award - Second Place
Lei Yu -
View Details
- Affiliation: Chongqing University, Chongqing, China
- Quote: I am very honored to hear that our paper was granted the TMS-EPD Materials Characterization Best Paper Award - Second Place. TMS is one of the prestigious conferences in the field of minerals, metals and materials. The session on materials characterization is one of the important sessions held by TMS. This well-known award encourages us to continue working on this promising interdisciplinary field that applies the latest surface microscopy methods on the atomic dynamical processes of applied materials.
- Other: "Applications of Aberration-Corrected Low-Energy Electron Microscopy for Metal Surfaces," TMS 2018: Characterization of Minerals, Metals, and Materials 2018
|
2019
-
EPD Materials Characterization Best Paper Award - Second Place
Lin Zhu -
View Details
- Affiliation: Chongqing University, Chongqing, China
- Quote: I am very honored to hear that our paper was granted the TMS-EPD Materials Characterization Best Paper Award - Second Place. TMS is one of the prestigious conferences in the field of minerals, metals and materials. The session on materials characterization is one of the important sessions held by TMS. This well-known award encourages us to continue working on this promising interdisciplinary field that applies the latest surface microscopy methods on the atomic dynamical processes of applied materials.
- Other: "Applications of Aberration-Corrected Low-Energy Electron Microscopy for Metal Surfaces," TMS 2018: Characterization of Minerals, Metals, and Materials 2018
|
2019
-
EPD Materials Characterization Best Paper Award - Third Place
No award given.
- Title:
- Affiliation: ,
- Quote: N/A
- Citation: N/A
- Other: N/A
|
2019
-
EPD Materials Characterization Best Poster Award - First Place
Yunus Kalay -
View Details
- Title: Associate Professor
- Affiliation: Middle East Technical University, Cankaya Ankara, Turkey
- Other: "The Effect of Transition Metals in Devitrification of Al-TM-RE Marginal Glass Forming Alloys"
|
2019
-
EPD Materials Characterization Best Poster Award - First Place
Mustafacan Kutsal -
View Details
- Other: "The Effect of Transition Metals in Devitrification of Al-TM-RE Marginal Glass Forming Alloys"
|
2019
-
EPD Materials Characterization Best Poster Award - First Place
Bengisu Yasar -
View Details
- Title: Research Assistant
- Affiliation: Middle East Technical University, Cankaya Ankara, Turkey
- Other: "The Effect of Transition Metals in Devitrification of Al-TM-RE Marginal Glass Forming Alloys"
|
2019
-
EPD Materials Characterization Best Poster Award - Second Place
Satya Ganti -
View Details
- Title: Research Scientist
- Affiliation: UES Inc, Dayton, OH
- Quote: TMS provides excellent learning opportunities for young professionals to communicate with senior members and understand their approaches used in failure analysis of materials. We are proud to be recognized for our efforts by this prestigious organization.
- Other: "Automated Optical Serial Sectioning Analysis of Phases in a Medium Carbon Steel"
|
2019
-
EPD Materials Characterization Best Poster Award - Second Place
Veeraraghavan Sundar -
View Details
- Title: Technical Marketing Manager
- Affiliation: UES Inc, Dayton, OH
- Quote: TMS has provided an excellent venue for our teams to have in-depth conversations with materials professionals practicing 3D microstructural analysis for research or industrial problem solving. The ability to share our work with this community, and to benefit from the engaging and constructive critique is very valuable. We enjoy the shared moments of inspiration and insight that result from the TMS conferences.
- Other: "Automated Optical Serial Sectioning Analysis of Phases in a Medium Carbon Steel"
|
2019
-
EPD Materials Characterization Best Poster Award - Second Place
Bryan Turner -
View Details
- Title: Materials Engineer
- Affiliation: Materials Resources LLC, Dayton, OH
- Quote: Earning this award is evidence that I can contribute to the scientific community. At this early stage of my career, it is reassuring to know that my work has been valuable to others on their quest to better understand the world around us. Additionally, it indicates that the tools and resources that I have been involved in developing may be used to solve some real world problems. As an engineer, there is not much more you can ask for.
- Other: "Automated Optical Serial Sectioning Analysis of Phases in a Medium Carbon Steel"
|
2019
-
EPD Materials Characterization Best Poster Award - Third Place
Andrew Brown -
View Details
- Other: "Experimental Investigation of Low-velocity Ballistic Impact Response of Closed Cell Aluminium Foams for Various Shaped Projectile Tips"
|
2019
-
EPD Materials Characterization Best Poster Award - Third Place
Juan Escobedo Diaz -
View Details
- Title: Lecturer-Assistant Professor
- Affiliation: University Of New South Wales, Canberra, Australia
- Other: "Experimental Investigation of Low-velocity Ballistic Impact Response of Closed Cell Aluminium Foams for Various Shaped Projectile Tips"
|
2019
-
EPD Materials Characterization Best Poster Award - Third Place
Paul Hazell -
View Details
- Other: "Experimental Investigation of Low-velocity Ballistic Impact Response of Closed Cell Aluminium Foams for Various Shaped Projectile Tips"
|
2019
-
EPD Materials Characterization Best Poster Award - Third Place
Md Ashraful Islam -
View Details
- Other: "Experimental Investigation of Low-velocity Ballistic Impact Response of Closed Cell Aluminium Foams for Various Shaped Projectile Tips"
|
2019
-
EPD Materials Characterization Best Poster Award - Third Place
Md Abdul Kader -
View Details
- Title: Student
- Affiliation: University Of New South Wales, Canberra, Australia
- Other: "Experimental Investigation of Low-velocity Ballistic Impact Response of Closed Cell Aluminium Foams for Various Shaped Projectile Tips"
|
2019
-
EPD Pyrometallurgy Best Paper Award
Ata Fallah-Mehrjardi -
View Details
- Title: Senior Manager
- Affiliation: Aurubis AG, Hamburg, Germany
- Quote: I am glad that years of spending time in research has been recognized by the science community and I appreciate selecting my paper for the best paper award.
- Other: "Experimental Investigation of Gas/Slag/Matte/Tridymite Equilibria in the Cu-Fe-O-S-Si System in Controlled Gas Atmosphere: Experimental Results at 1523 K (1250 C) and P(SO2) = 0.25 atm," Metallurgical and Materials Transactions B, April 2018
|
2019
-
EPD Pyrometallurgy Best Paper Award
Peter Hayes -
View Details
- Title: Professor and Program Leader
- Affiliation: University of Queensland, Brisbane, QLD, Australia
- Other: "Experimental Investigation of Gas/Slag/Matte/Tridymite Equilibria in the Cu-Fe-O-S-Si System in Controlled Gas Atmosphere: Experimental Results at 1523 K (1250 C) and P(SO2) = 0.25 atm," Metallurgical and Materials Transactions B, April 2018
|
2019
-
EPD Pyrometallurgy Best Paper Award
Taufiq Hidayat -
View Details
- Affiliation: University of Queensland, Brisbane, QLD, Australia
- Other: "Experimental Investigation of Gas/Slag/Matte/Tridymite Equilibria in the Cu-Fe-O-S-Si System in Controlled Gas Atmosphere: Experimental Results at 1523 K (1250 C) and P(SO2) = 0.25 atm," Metallurgical and Materials Transactions B, April 2018
|
2019
-
EPD Pyrometallurgy Best Paper Award
Evgueni Jak -
View Details
- Title: Professor
- Affiliation: University of Queensland, Brisbane, QLD, Australia
- Other: "Experimental Investigation of Gas/Slag/Matte/Tridymite Equilibria in the Cu-Fe-O-S-Si System in Controlled Gas Atmosphere: Experimental Results at 1523 K (1250 C) and P(SO2) = 0.25 atm," Metallurgical and Materials Transactions B, April 2018
|
2019
-
EPD Scholarship
Brooklyn Carlson -
View Details
- Title: Student
- Affiliation: University of Wisconson , Madison, WI
- Quote: Materials Advantage and The Minerals, Metals and Materials Society inform students such as myself about current events in materials related industries through a variety of communication platforms. Furthermore, TMS provides information regarding the details of materials conferences, such as MS&T, and provides insight to industry needs and career opportunities for young professionals. When I was a student beginning my education in materials science and engineering, I was undecided which materials to focus on within my academic studies; however, the information made available as a student of MA and TMS presented the opportunity to research the applications and industries related to materials engineering. With vast amounts of information at my disposal, I eventually decided to focus on metals and polymers during my undergraduate education. With an anticipated graduation date of May 2019, I am in the process of searching for full-time employment. Based on my previous experiences, I am pursuing a career in either the automotive, defense or aerospace industry, particularly in a manufacturing capacity.
|
2019
-
EPD Science Award
Ata Fallah-Mehrjardi -
View Details
- Title: Senior Manager
- Affiliation: Aurubis AG, Hamburg, Germany
- Quote: It is a great honor that my publication has been recognized by the science community to have major contribution in the understanding of metallurgical process.
- Other: "Experimental Investigation of Gas/Slag/Matte/Tridymite Equilibria in the Cu-Fe-O-S-Si System in Controlled Gas Atmosphere: Development of Technique," Metallurgical and Materials Transactions B, December 2017
|
2019
-
EPD Science Award
Peter Hayes -
View Details
- Title: Professor and Program Leader
- Affiliation: University of Queensland, Brisbane, QLD, Australia
- Quote: Thank you to the TMS Extraction & Processing Division awards committee for this honor. I think it is important that we continue to provide new fundamental scientific information to enhance our knowledge and research capability, and support technology development. For me breaking new ground is always exciting, and it is rewarding to know that others working in the field value this research.
- Other: "Experimental Investigation of Gas/Slag/Matte/Tridymite Equilibria in the Cu-Fe-O-S-Si System in Controlled Gas Atmosphere: Development of Technique," Metallurgical and Materials Transactions B, December 2017
|
2019
-
EPD Science Award
Taufiq Hidayat -
View Details
- Affiliation: University of Queensland, Brisbane, QLD, Australia
- Other: "Experimental Investigation of Gas/Slag/Matte/Tridymite Equilibria in the Cu-Fe-O-S-Si System in Controlled Gas Atmosphere: Development of Technique," Metallurgical and Materials Transactions B, December 2017
|
2019
-
EPD Science Award
Evgueni Jak -
View Details
- Title: Professor
- Affiliation: University of Queensland, Brisbane, QLD, Australia
- Other: "Experimental Investigation of Gas/Slag/Matte/Tridymite Equilibria in the Cu-Fe-O-S-Si System in Controlled Gas Atmosphere: Development of Technique," Metallurgical and Materials Transactions B, December 2017
|
2019
-
EPD Technology Award
Subodh Das -
View Details
- Title: CEO & Founder
- Affiliation: Phinix LLC, Clayton, MO
- Quote: This award will continue to help us in obtaining potentially new joint venture partners to invest in commercialization of our trademarked and patented RE-12TM Mg electrorefining process to extract Mg and Al-Mg alloys from Mg-bearing aluminum scrap. During my more than 40 year association with TMS, I have made and built many professional and personal contacts which have immensely benefited my personal and professional career and enhanced technical and market knowledge of the global aluminum industry.
- Other: "Use of Thermodynamic Modeling for Selection of Electrolyte for Electrorefining of Magnesium from Aluminum Alloy Melts," Metallurgical and Materials Transactions B, February 2017
|
2019
-
EPD Technology Award
Adam Gesing -
View Details
- Title: President
- Affiliation: Gesing Consultants Inc, Kingston, ONT, Canada
- Quote: This award is a very welcome peer validation of our scientific work that we were able to do in collaboration with the FactSage thermodynamic modelling group at Ecole Polytechnique, Montreal PQ, and with MER Corporation, Tucson, AZ for electrochemical experimentation, all funded by a DOE-ARPA-E project. Work involved thermodynamic modelling of magnesium electrorefining system combined with experimental validation of the model predictions. This award will aid us in convincing potential joint venture partners to invest in commercialization of the Mg electrorefining process.
- Other: "Use of Thermodynamic Modeling for Selection of Electrolyte for Electrorefining of Magnesium from Aluminum Alloy Melts," Metallurgical and Materials Transactions B, February 2017
|
2019
-
EPD Young Leaders Professional Development
Neslihan Dogan -
View Details
- Title: Assistant Professor
- Affiliation: McMaster University, Hamilton, ONT, Canada
- Quote: I would like to express my gratitude to the TMS Foundation for its generous support. This award will provide me recognition and visibility in my research community. To date, I have benefited significantly by attending TMS annual meetings in past years. I found new collaborations through networking opportunities in the meetings. I also took advantage of the access to TMS journals such as JOM and Metallurgical and Materials Transactions A and B as well as purchasing technical books offered through Springer. I look forward to participating actively within the technical committees and working on my professional growth.
|
2019
-
EPD Young Leaders Professional Development
Leili Tafaghodi -
View Details
- Title: Assistant Professor
- Affiliation: University of British Columbia, Vancouver, BC, Canada
- Quote: I am delighted to have been chosen as one of the recipients of the 2019 Young Leaders Professional Development Award from the Extraction & Processing Division. I have greatly benefited from the events organized by TMS since I attended the 2012 TMS Annual Meeting & Exhibition in Orlando, Florida as a Ph.D. student. TMS provides an opportunity to meet academic and industrial researchers and offers me a platform to present my research to the scientific community.
|
2019
-
Fellow Award
Thomas Bieler -
View Details
- Title: Professor and Director
- Affiliation: Michigan State University, East Lansing, MI
- Citation: For seminal scientific and technological contributions to the understanding of the influence of grain boundaries and texture on the processing and properties of engineering alloys.
|
2019
-
Fellow Award
M. Grace Burke -
View Details
- Title: Professor and Director
- Affiliation: University of Manchester, Manchester, England
- Citation: For extraordinary experimental skills in determining the causes of brittle failure and stress corrosion cracking in nuclear reactor materials.
|
2019
-
Fellow Award
Frank Crossley -
View Details
- Title: Retired
- Affiliation: Aerojet Propulsion Research Institute, Attleboro, MA
- Citation: For the pioneering development and application of Titanium alloys into crucial aerospace applications, both commercial and defense, including critical US national security areas.
|
2019
-
Fellow Award
Dennis Dimiduk -
View Details
- Title: Chief Technologist
- Affiliation: BlueQuartz Software LLC, Springboro, OH
- Citation: For leadership and contributions to high-temperature and intermetallic materials development, integrated materials modeling, 3D materials science and the science of size-scale effects in plasticity.
|
2019
-
Fellow Award
Roderick Guthrie -
View Details
- Title: Director of McGill Metals Processing Centre
- Affiliation: McGill University, Montreal, QC, Canada
- Quote: I have a deep respect for the TMS organization. Having been a TMS member since 1969, I have had the opportunity to present many of my, and my students', research contributions. Meanwhile, I have watched the TMS organization grow into a global force for good. Given active members and contributors from all around the world, I am hopeful that this will continue. As such, I accept this recognition of being named a Fellow of TMS with gratitude and pride.
- Citation: In recognition of his outstanding research contributions to the development of ferrous and non-ferrous processes, and a distinguished academic career in the education of students.
|
2019
-
Fellow Award
Elizabeth Holm -
View Details
- Title: Professor
- Affiliation: Carnegie Mellon University, Pittsburgh, PA
- Citation: For pioneering achievements and leadership in computational materials science and Integrated Computational Materials Engineering and for distinguished service to the materials profession.
|
2019
-
Fellow Award
Nack Joon Kim -
View Details
- Title: Professor
- Affiliation: Pohang University of Science and Technology, Pohang Gyungbuk, South Korea
- Quote: TMS has been one of my principal professional societies throughout my career ever since I joined it as a graduate student in the United States, although I have now been conducting research in Korea for some 30 years. As a long-time international member, I am deeply honored to be recognized by TMS and would like to share this honor with my colleagues, post-docs, and students, without whose support this prestigious award would not have been possible.
- Citation: For seminal contributions toward the development of high performance structural alloys through microstructure design, leading to commercialization of these alloys in various applications.
|
2019
-
Fellow Award
Alan Taub -
View Details
- Title: Professor
- Affiliation: University of Michigan, Ann Arbor, MI
- Quote: I first joined TMS as a graduate student and have relied on the meetings and publications to learn about the latest developments in my field. As a society that embraces the intersection of science and engineering, TMS enables me to interact with a broad range of researchers from industry, national laboratories and academia from around the world. It is quite an honor to be recognized as a Fellow by this community.
- Citation: For advancing materials technology and commercialization through a combination of personal research accomplishments and technology leadership in both industry and academia.
|
2019
-
Fellow Award
Dan Thoma -
View Details
- Title: Director Grainger Institute for Engineering
- Affiliation: University of Wisconsin - Madison, Madison, WI
- Quote: Receiving the prestigious TMS Fellow Award is a humbling honor. TMS is my primary source for professional information dissemination and networking. Since I was a student, I have admired the leadership and the contributions of past TMS Fellows. To be recognized within this esteemed group is truly rewarding. I look forward to future years of continued, productive interactions and service.
- Citation: For pioneering research in advanced processing and alloy design as well as for leadership of and service to the materials profession.
|
2019
-
FMD Distinguished Scientist/Engineer Award
No award given.
- Title:
- Affiliation: ,
- Quote: N/A
- Citation: N/A
- Other: N/A
|
2019
-
FMD Distinguished Service Award
Tae-Kyu Lee -
View Details
- Title: Associate Professor
- Affiliation: Portland State University, Portland, OR, US
|
2019
-
FMD Gilbert Chin Scholarship
Justin Qian -
View Details
- Title: Student
- Affiliation: University of Pennsylvania, Philadelphia, PA
- Quote: I am very honored to receive the FMD Gilbert Chin Scholarship. I also extend my thanks to Battelle and Jeffrey Wadsworth for their matching and graduate scholarships. TMS and Materials Advantage have been very helpful to my professional development by providing me with financial support, and also by giving me opportunities to interact with other professionals and students studying materials science. My future plans include applying to graduate school to work on materials research. The support from TMS has been very helpful to me so far, and I hope to be able to contribute to the field in the future.
|
2019
-
FMD JEM Best Paper Award
No award given.
- Title:
- Affiliation: ,
- Quote: N/A
- Citation: N/A
- Other: N/A
|
2019
-
FMD John Bardeen Award
Eric Chason -
View Details
- Title: Professor
- Affiliation: Brown University, Barrington, RI, US
|
2019
-
FMD Young Leaders Professional Development
Surojit Gupta -
View Details
- Title: Assistant Professor
- Affiliation: University of North Dakota,
- Quote: It is an honor to receive the 2019 TMS FMD Young Leaders Professional Development Award. TMS membership helps me to connect with my fellow scientists. More particularly, this award will help me to network and be a part of an esteemed materials society for solving challenging engineering problems.
|
2019
-
FMD Young Leaders Professional Development
Ning Zhang -
View Details
- Title: Research Assistant Professor
- Affiliation: Colorado School of Mines, Golden, CO, US
- Quote: TMS has always provided me with excellent opportunities in connecting with faculty, students, and researchers around the world. As a junior research faculty, TMS has allowed me to interact closely with the top scientists and engineers in the materials field by co-organizing a symposium, guest-editing a special issue of JOM, and participating in technical committee meetings. I have also benefitted a lot through presenting my work and communicating with researchers in my field. I am grateful and proud to receive this Young Leaders Professional Development Award, which will encourage me to be even further involved in future TMS events and activities.
|
2019
-
Frank Crossley Diversity Award
Olivia Underwood -
View Details
- Title: Product Realization Team Leader
- Affiliation: Sandia National Laboratories, Albuquerque, NM
- Quote: TMS membership and the TMS Foundation benefits me by providing a platform to share my latest work with the research community along with the opportunity to be able to attend the different talks and workshops of others when attending the TMS conferences. It allows me to network and collaborate with others. It also allows me to stay connected to my colleagues. Last but not least, it is great to have access to the free journals and to be able to serve on different committees.
- Citation: For a first generation college graduate, exemplifying persistence in her academic degree, a professional career leader, and outreach to under-represented women in STEM.
|
2019
-
Frontiers of Materials Award
No award given.
- Title:
- Affiliation: ,
- Quote: N/A
- Citation: N/A
- Other: N/A
|
2019
-
Institute of Metals/Robert Franklin Mehl Award
Hael Mughrabi -
View Details
- Title: Professor Emeritus
- Affiliation: University of Erlangen-Nuermberg, Erlangen, Germany
- Quote: During the past almost 35 years of my membership with TMS, I have repeatedly attended TMS meetings, given talks there, and enjoyed valuable scientific and personal contacts made with many other colleagues. Over the years, I have witnessed how TMS has expanded its fields of influence internationally. In this way, TMS has become an essential part of my professional and scientific activities. In the year 2008, TMS honored me with an honorary symposium at its meeting in New Orleans. Now, I consider the receipt of the prestigious TMS Institute of Metals Lecturer and Robert Franklin Mehl Award a very special recognition of the work of my research group, and I am very proud to be honored in this way.
- Citation: For seminal discoveries that had a profound effect on our understanding of plastic deformation and failure of metals with particular emphasis on fatigue and for global leadership.
|
2019
-
International Symposium on Superalloys Scholarship
Adam Ladd -
View Details
- Title: Student
- Affiliation: University of Illinois, Urbana Champaign, IL
- Quote: It's a great honor to receive this scholarship! I've worked hard my entire academic career to be the best engineer and scientist that I could be, so it's nice to know that some of that hard work has paid off. This scholarship will help me leave college with less debt and allow me to start my future career on the right foot. Being a part of Materials Advantage has been very impactful. I've made many friends, learned about different companies and career paths, and grown from a student to a professional. I can't wait to make meaningful, world-changing contributions to our society after I graduate.
|
2019
-
International Symposium on Superalloys Scholarship
Hari Rajendran -
View Details
- Title: Student
- Affiliation: Texas A&M University, College Station, TX
- Quote: I am incredibly humbled and honored to have been selected for the prestigious TMS International Symposium on Superalloys Scholarship. This recognition is an encouragement for my doctoral study which focusses on the fundamental understanding and prediction of the property degradation of Ni-based single crystal superalloys to better design the material for high-temperature applications, and thereby, retarding the insidious turbine blade failure. I would credit my advisor, Jean-Briac le Graverend, for instilling in me a passion for this line of research and motivating me to strive for better contributions to the field. I would also like to thank the TMS Foundation, the Organizing Committee of the International Symposium on Superalloys, and the Materials Advantage student program for the motivation and opportunities they provide to young researchers like me.
|
2019
-
Julia and Johannes Weertman Educator Award
David Van Aken -
View Details
- Title: Curators’ Teaching Professor
- Affiliation: Missouri University of Science and Technology, Rolla, MO
- Citation: For over three decades of exemplary education of students in physical metallurgy and the development of innovative technologies to produce next generation high strength steels.
|
2019
-
Kaufman CALPHAD Scholarship
Katelyn Adkison -
View Details
- Title: Student
- Affiliation: Pennsylvania State University, Philadelphia, PA
- Quote: I am very honored to receive the Kaufman CALPHAD scholarship. It will help me pay for my studies at Penn State, a place that has provided a wealth of opportunities in research, classes, and clubs over the last three years. In addition, TMS and Materials Advantage have allowed me to attend conferences where I was introduced to the diverse field of materials science through topics presented by other students and professionals. What I’ve learned from these experiences will help me succeed in a career in the metals or biomaterials industry after graduation.
|
2019
-
Leadership Award
James Warren -
View Details
- Title: Director, Materials Genome Program
- Affiliation: National Institute of Standards and Technology , Gaithersburg, MD
- Quote: This award from my TMS colleagues is very meaningful. TMS has been one of the most forward looking organizations in support of the mission of the Materials Genome Initiative, acting as a true partner in realizing the vision to accelerate materials discovery. Having devoted the last nine years of my career to this goal, having TMS in my corner has made an enormous difference. I believe that my leadership was buoyed by the leadership TMS has shown.
- Citation: For exceptional leadership in realizing the vision of the Materials Genome Initiative (MGI) to discover, manufacture, and deploy advanced materials twice as fast, at a fraction of the cost.
|
2019
-
Light Metals Award
Jean-Louis Achard -
View Details
- Title: R&D Technician
- Affiliation: Constellium Technology Center, Voreppe, France
- Quote: First World recognition on a first presentation in English. It’s a strong recognition for a long and laborious work. This is a source of great pride for a technician who did not do a lot of study.
- Other: "An Innovative Ultrasonic Technology for the Continuous Quality Monitoring of Liquid Aluminum on Casting Lines"
|
2019
-
Light Metals Award
Pierre Le Brun -
View Details
- Title: Technical Expert
- Affiliation: Constellium Technology Center, Voreppe, France
- Quote: Being a member of TMS for many years allowed me to be in contact with colleagues throughout the world, to keep up to date with new research activities, and to network with academia and industry. The award is an important recognition from our peers, demonstrating the relevance of the research done for our industry and the quality of the achieved results. These results were obtained through team work: a value promoted by TMS.
- Other: "An Innovative Ultrasonic Technology for the Continuous Quality Monitoring of Liquid Aluminum on Casting Lines"
|
2019
-
Light Metals Award
Pierre-Yves Menet -
View Details
- Title: R&D Group Manager
- Affiliation: Constellium Technology Center, Voreppe, France
- Quote: TMS is an important institution for our profession as it offers a great opportunity for sharing knowledge and developing professional networks. It also makes the links between academia and industry. That is why I have been a member for many years. This award is an important recognition from peers on an invention that should be beneficial for our industry
- Other: "An Innovative Ultrasonic Technology for the Continuous Quality Monitoring of Liquid Aluminum on Casting Lines"
|
2019
-
Light Metals Award
Fabio Taina -
View Details
- Title: Metallurgy and Quality Manager
- Affiliation: Constellium Issoire, Issoire, France
- Quote: I am deeply honored to receive this award. This award represents the accomplishment of an innovative research project handled by a team composed of experts in industrial process, liquid metal treatment, and non-destructive testing. This prize recognizes the value of our research and the impact of this invention on the liquid metal quality improvement.
- Other: "An Innovative Ultrasonic Technology for the Continuous Quality Monitoring of Liquid Aluminum on Casting Lines"
|
2019
-
Light Metals Subject Award - Alumina/Bauxite
Efthymios Balomenos -
View Details
- Title: Senior Researcher/External Associate
- Affiliation: National Technical University of Athens/ Mytilineos S.A., Viotia, Greece
- Quote: This award comes as a significant recognition of our team's efforts in the field of achieving sustainability in real life metallurgical applications. Solving the Bauxite Residue problem has been our goal set both in the University (NTUA) and in the industry (Mytilineos SA). Personally, I have devoted almost the last decade working on this from both sides and under both affiliations. My gratitude goes to TMS for honoring us with this award.
- Other: "Developing New Process for Selective Extraction of Rare Earth Elements from Bauxite Residue Based on Functionalized Ionic Liquids," Light Metals 2018
|
2019
-
Light Metals Subject Award - Alumina/Bauxite
Panagiotis Davris -
View Details
- Affiliation: Aluminium of Greece, Viotia, Greece
- Quote: I'm honored that the content of my research presented at the conference receives this valuable recognition from the TMS community.
- Other: "Developing New Process for Selective Extraction of Rare Earth Elements from Bauxite Residue Based on Functionalized Ionic Liquids," Light Metals 2018
|
2019
-
Light Metals Subject Award - Alumina/Bauxite
Dimitrios Panias -
View Details
- Title: Professor
- Affiliation: National Technical University of Athens, Attika, Greece
- Quote: It is an honor for the whole research group from the Laboratory of Metallurgy to be awarded with this prize. We started the work on this field with great expectations and now we are very happy that TMS awards our attempts.
- Other: "Developing New Process for Selective Extraction of Rare Earth Elements from Bauxite Residue Based on Functionalized Ionic Liquids," Light Metals 2018
|
2019
-
Light Metals Subject Award - Alumina/Bauxite
Ioannis Paspaliaris -
View Details
- Title: Professor
- Affiliation: National Technical University of Athens, Zografou, Greece
- Other: "Developing New Process for Selective Extraction of Rare Earth Elements from Bauxite Residue Based on Functionalized Ionic Liquids," Light Metals 2018
|
2019
-
Light Metals Subject Award - Aluminum Alloys
Vishweshwar Arvikar -
View Details
- Title: Senior Process Engineer
- Affiliation: Nemak Alabama, Sylacauga, AL
- Other: "The Combined Effects of Sr Additions and Heat Treatment on the Microstructure and Mechanical Properties of High Pressure Die Cast A383 Alloy," Light Metals 2018
|
2019
-
Light Metals Subject Award - Aluminum Alloys
Luke Brewer -
View Details
- Title: Associate Professor
- Affiliation: University of Alabama, Tuscaloosa, AL
- Other: "The Combined Effects of Sr Additions and Heat Treatment on the Microstructure and Mechanical Properties of High Pressure Die Cast A383 Alloy," Light Metals 2018
|
2019
-
Light Metals Subject Award - Aluminum Alloys
Mikko Karkkainen -
View Details
- Title: Student
- Affiliation: University of Alabama, Tuscaloosa, AL
- Other: "The Combined Effects of Sr Additions and Heat Treatment on the Microstructure and Mechanical Properties of High Pressure Die Cast A383 Alloy," Light Metals 2018
|
2019
-
Light Metals Subject Award - Aluminum Alloys
Ilya Levin -
View Details
- Title: Site Metallurgist
- Affiliation: Nemak Alabama, Sylacauga, AL
- Other: "The Combined Effects of Sr Additions and Heat Treatment on the Microstructure and Mechanical Properties of High Pressure Die Cast A383 Alloy," Light Metals 2018
|
2019
-
Light Metals Subject Award - Aluminum Alloys
Tao Liu -
View Details
- Title: Graduate Research Assistant
- Affiliation: University of Alabama, Tuscaloosa, AL
- Quote: Thanks for this award for our paper about mechanical properties and microstructures of high pressure die cast A383 alloys. It is a great honor. I feel confident in my future research after receiving this recognition by TMS.
- Other: "The Combined Effects of Sr Additions and Heat Treatment on the Microstructure and Mechanical Properties of High Pressure Die Cast A383 Alloy," Light Metals 2018
|
2019
-
Light Metals Subject Award - Aluminum Alloys
Sydney Morales -
View Details
- Title: Student
- Affiliation: University of Alabama, Tuscaloosa, AL
- Other: "The Combined Effects of Sr Additions and Heat Treatment on the Microstructure and Mechanical Properties of High Pressure Die Cast A383 Alloy," Light Metals 2018
|
2019
-
Light Metals Subject Award - Aluminum Alloys
Laurentiu Nastac -
View Details
- Title: Professor
- Affiliation: University of Alabama, Tuscaloosa, AL
- Other: "The Combined Effects of Sr Additions and Heat Treatment on the Microstructure and Mechanical Properties of High Pressure Die Cast A383 Alloy," Light Metals 2018
|
2019
-
Light Metals Subject Award - Aluminum Reduction Technology
Gordon Agbenyegah -
View Details
- Title: Ph.D. candidate
- Affiliation: University of Auckland, Auckland, New Zealand
- Quote: This award will generate more work—more of the work I have unlimited passion for and more of the work that can bring significant benefits to alumina refineries and aluminium smelters. I am grateful that TMS presents a a unique platform for showcasing work that many industry practitioners and academics would not have known about.
- Other: "Impacts of Sodium on Alumina Quality and Consequences for Current Efficiency," Light Metals 2018
|
2019
-
Light Metals Subject Award - Aluminum Reduction Technology
Margaret Hyland -
View Details
- Title: Vice-Provost Research
- Affiliation: Victoria University of Wellington, Wellington, New Zealand
- Quote: This is a wonderful affirmation of the work of the Light Metals Research Centre – both the quality of the research and its practical relevance.
- Other: "Impacts of Sodium on Alumina Quality and Consequences for Current Efficiency," Light Metals 2018
|
2019
-
Light Metals Subject Award - Aluminum Reduction Technology
Grant McIntosh -
View Details
- Title: Principal Chemist/Research Fellow
- Affiliation: University of Auckland, Auckland, New Zealand
- Quote: My TMS membership connects me with a community where my fundamental research can make real-world contributions. I am proud to accept this award as it demonstrates that this community values the contributions that my team and I make. It has inspired me to continue playing my small part in furthering our knowledge in light metals production and understanding alumina.
- Other: "Impacts of Sodium on Alumina Quality and Consequences for Current Efficiency," Light Metals 2018
|
2019
-
Light Metals Subject Award - Aluminum Reduction Technology
James Metson -
View Details
- Title: Deputy Vice Chancellor of Research
- Affiliation: University of Auckland, Auckland, New Zealand
- Other: "Impacts of Sodium on Alumina Quality and Consequences for Current Efficiency," Light Metals 2018
|
2019
-
Light Metals Subject Award - Aluminum Reduction Technology
Hasini Wijayaratne -
View Details
- Title: Research Engineer
- Affiliation: University of Auckland, Auckland, New Zealand
- Quote: It feels great to be recognized for our research in this field and to know that it reaches a wider audience/community through TMS. It is also an encouragement to continue working in this area contributing to the light metals industry.
- Other: "Impacts of Sodium on Alumina Quality and Consequences for Current Efficiency," Light Metals 2018
|
2019
-
Light Metals Subject Award - Electrode Technology for Aluminum Production
Juraj Chmelar -
View Details
- Title: Area Manger Process
- Affiliation: Hydro Aluminium AS, Øvre Årdal, Norway
- Quote: The TMS Annual Meeting & Exhibition is a great opportunity for companies, universities, research institutes, and students. Various companies, schools, and research places can present their results or technology. Students can show abilities with results and establish a network for future opportunities. Members from operation or production units can get updated on the progress in research and equipment in their respective areas and meet colleagues to exchange experiences and future plans. An award is a great opportunity to give recognition within TMS and also for the work done in their company or university.
- Other: "Interaction of Anode Aggregate and Binder in the Sessile Drop Wetting Test," Light Metals 2018
|
2019
-
Light Metals Subject Award - Electrode Technology for Aluminum Production
Hogne Linga -
View Details
- Title: Consultant
- Quote: When this work was undertaken I was an employee at Hydro Aluminum. In our work we tried to link the findings to practical production. We are very proud to get such an award.
- Other: "Interaction of Anode Aggregate and Binder in the Sessile Drop Wetting Test," Light Metals 2018
|
2019
-
Light Metals Subject Award - Electrode Technology for Aluminum Production
Lorentz Petter Lossius -
View Details
- Title: Principal Engineer
- Affiliation: Hydro Aluminium AS, Øvre Årdal, Norway
- Quote: The TMS Annual Meeting & Exhibition is a forum for metal companies, universities, and research institutes. Companies and institutes can promote their technology in a professional setting; graduates can show their research. Plant operation technologists can get updated on the newest methods and from the exhibition also an update on state of the art equipment. An award brings recognition, both at home and within the research community. Many TMS members take part in voluntary work to support the meetings.
- Other: "Interaction of Anode Aggregate and Binder in the Sessile Drop Wetting Test," Light Metals 2018
|
2019
-
Light Metals Subject Award - Electrode Technology for Aluminum Production
Bruno Rausch -
View Details
- Title: Principal Engineer
- Affiliation: Hydro Aluminium Deutschland GmbH, Neuss, Germany
- Other: "Interaction of Anode Aggregate and Binder in the Sessile Drop Wetting Test," Light Metals 2018
|
2019
-
Light Metals Subject Award - Electrode Technology for Aluminum Production
Rebecca Thorne -
View Details
- Title: Researcher
- Affiliation: Norwegian Institute for Air Research, Kjeller, Norway
- Other: "Interaction of Anode Aggregate and Binder in the Sessile Drop Wetting Test," Light Metals 2018
|
2019
-
Light Metals Subject Award - Electrode Technology for Aluminum Production
Viktorija Tomkute -
View Details
- Title: Project Engineer
- Affiliation: Hydro Aluminium AS, Øvre Årdal, Norway
- Quote: The TMS Annual Meeting & Exhibition is a forum for metal companies, universities, and research institutes. Companies and institutes can promote their technology in a professional setting; graduates can show their research. Plant operation technologists can get updated on the newest methods and from the exhibition also an update on state of the art equipment. An award brings recognition, both at home and within the research community. Many TMS members take part in voluntary work to support the meetings.
- Other: "Interaction of Anode Aggregate and Binder in the Sessile Drop Wetting Test," Light Metals 2018
|
2019
-
Light Metals Subject Award - Warren Peterson Cast Shop for Aluminum Production
Jean-Louis Achard -
View Details
- Title: R&D Technician
- Affiliation: Constellium Technology Center, Voreppe, France
- Quote: First World recognition on a first presentation in English. It’s a strong recognition for a long and laborious work. This is a source of great pride for a technician who did not do a lot of study.
- Other: "An Innovative Ultrasonic Technology for the Continuous Quality Monitoring of Liquid Aluminum on Casting Lines"
|
2019
-
Light Metals Subject Award - Warren Peterson Cast Shop for Aluminum Production
Pierre Le Brun -
View Details
- Title: Technical Expert
- Affiliation: Constellium Technology Center, Voreppe, France
- Quote: Being a member of TMS for many years allowed me to be in contact with colleagues throughout the world, to keep up to date with new research activities, and to network with academia and industry. The award is an important recognition from our peers, demonstrating the relevance of the research done for our industry and the quality of the achieved results. These results were obtained through team work: a value promoted by TMS.
- Other: "An Innovative Ultrasonic Technology for the Continuous Quality Monitoring of Liquid Aluminum on Casting Lines"
|
2019
-
Light Metals Subject Award - Warren Peterson Cast Shop for Aluminum Production
Pierre-Yves Menet -
View Details
- Title: R&D Group Manager
- Affiliation: Constellium Technology Center, Voreppe, France
- Quote: TMS is an important institution for our profession as it offers a great opportunity for sharing knowledge and developing professional networks. It also makes the links between academia and industry. That is why I have been a member for many years. This award is an important recognition from peers on an invention that should be beneficial for our industry
- Other: "An Innovative Ultrasonic Technology for the Continuous Quality Monitoring of Liquid Aluminum on Casting Lines"
|
2019
-
Light Metals Subject Award - Warren Peterson Cast Shop for Aluminum Production
Fabio Taina -
View Details
- Title: Metallurgy and Quality Manager
- Affiliation: Constellium Issoire, Issoire, France
- Quote: I am deeply honored to receive this award. This award represents the accomplishment of an innovative research project handled by a team composed of experts in industrial process, liquid metal treatment, and non-destructive testing. This prize recognizes the value of our research and the impact of this invention on the liquid metal quality improvement.
- Other: "An Innovative Ultrasonic Technology for the Continuous Quality Monitoring of Liquid Aluminum on Casting Lines"
|
2019
-
LMD Distinguished Service Award
Barry Sadler -
View Details
- Title: Managing Director
- Affiliation: Net Carbon Consulting Pty Ltd, Melbourne, VIC, Australia
- Quote: Thank you to the Light Metals Division for this recognition of my service. Throughout my career, the recognition I have valued most is that provided by my peers, so receiving the Distinguished Service Award has special personal significance. Involvement in TMS activities since 1987 has been enormously rewarding to me personally and professionally; especially in enabling me to develop a network of international associates that I treasure. My volunteer work with TMS is a way of partly repaying these benefits.
- Citation: For advancing the role of TMS through his many contributions of time and effort as an author, organizer and instructor.
|
2019
-
LMD JOM Best Paper Award
Sanjay Sampath -
View Details
- Title: Distinguished Professor and Director
- Affiliation: Stoney Brook University, Stony Brook, NY
- Quote: Greg and I are grateful to the JOM awards committee for selection of our paper. JOM is an outstanding journal with a large number of excellent publications and getting recognized is an honor. We believe our paper about approaches for sustainable remanufacturing of metals is very timely given the challenges the world faces in terms of resource utilization, energy consumption and environmental management. JOM will provide a broad exposure to our concepts and potentially lead to applications based on the concepts described in our paper. We thank JOM and TMS for this distinct honor and look forward to our continued interaction with the journal and the society.
- Other: "Sustainability of Metal Structures via Spray-Clad Remanufacturing," JOM, April 2018
|
2019
-
LMD JOM Best Paper Award
Gregory Smith -
View Details
- Title: Researcher
- Affiliation: Naval Research Laboratory,
- Other: "Sustainability of Metal Structures via Spray-Clad Remanufacturing," JOM, April 2018
|
2019
-
LMD Magnesium Technology Award - Best Poster
John Allison -
View Details
- Title: Professor
- Affiliation: University Of Michigan, Ann Arbor, MI
- Other: "Interaction of Glide Dislocations with Extended Precipitates in Mg-Nd Alloys"
|
2019
-
LMD Magnesium Technology Award - Best Poster
Zhihua Huang -
View Details
- Title: Student
- Affiliation: University Of Michigan, Ann Arbor, MI
- Other: "Interaction of Glide Dislocations with Extended Precipitates in Mg-Nd Alloys"
|
2019
-
LMD Magnesium Technology Award - Best Poster
Amit Misra -
View Details
- Title: Professor
- Affiliation: University Of Michigan, Ann Arbor, MI
- Other: "Interaction of Glide Dislocations with Extended Precipitates in Mg-Nd Alloys"
|
2019
-
LMD Magnesium Technology Award - Student Paper
Trevor Abbott -
View Details
- Title: Director - Research & Development
- Affiliation: Magontec Limited, Sydney, NSW, Australia
- Other: "Experimental Study of the Solidification Microstructure in the Mg-Rich Corner of the Mg-Al-Ce System," Magnesium Technology 2018
|
2019
-
LMD Magnesium Technology Award - Student Paper
Mark Easton -
View Details
- Title: Professor
- Affiliation: RMIT University, Carlton, VIC, Australia
- Quote: TMS is a big part of my global network. The TMS Annual Meeting & Exhibition is where I meet up with the people I collaborate with and find out what is going on in the global materials community. It is great to see Charlotte’s work be recognized in this way and shows the importance of a team of people working together with a student on a project.
- Other: "Experimental Study of the Solidification Microstructure in the Mg-Rich Corner of the Mg-Al-Ce System," Magnesium Technology 2018
|
2019
-
LMD Magnesium Technology Award - Student Paper
Mark Gibson -
View Details
- Title: Honorary Fellow
- Affiliation: CSIRO Manufacturing, Clayton, VIC, Australia
- Quote: It is welcome recognition of the hard work that Charlotte has put into her research and a great indication that the future of the field is in good hands.
- Other: "Experimental Study of the Solidification Microstructure in the Mg-Rich Corner of the Mg-Al-Ce System," Magnesium Technology 2018
|
2019
-
LMD Magnesium Technology Award - Student Paper
Stuart McDonald -
View Details
- Title: Senior Research Fellow
- Affiliation: University of Queensland, Brisbane, QLD, Australia
- Quote: This award is great recognition for a hardworking Ph.D. student who has collaborated with a number of colleagues to access world-class facilities and research techniques. TMS provides an excellent platform to disseminate these results where they can have the greatest impact.
- Other: "Experimental Study of the Solidification Microstructure in the Mg-Rich Corner of the Mg-Al-Ce System," Magnesium Technology 2018
|
2019
-
LMD Magnesium Technology Award - Student Paper
Kazuhiro Nogita -
View Details
- Title: Professor
- Affiliation: University of Queensland, Brisbane, QLD, Australia
- Other: "Experimental Study of the Solidification Microstructure in the Mg-Rich Corner of the Mg-Al-Ce System," Magnesium Technology 2018
|
2019
-
LMD Magnesium Technology Award - Student Paper
David St. John -
View Details
- Title: Professor Emeritus
- Affiliation: University of Queensland, Brisbane, QLD, Australia
- Quote: It is very pleasing to receive this award as it is recognition of the quality of our research and the ability of one of our students to clearly communicate their work to a broad spectrum of the global research community. This platform is made possible through membership in TMS. My continued membership derives from the breadth of research areas that TMS covers. Also, on the annual opportunity to catch up with colleagues whom I would not otherwise meet face to face without the existence of TMS.
- Other: "Experimental Study of the Solidification Microstructure in the Mg-Rich Corner of the Mg-Al-Ce System," Magnesium Technology 2018
|
2019
-
LMD Magnesium Technology Award - Student Paper
Mark Styles -
View Details
- Title: Research Scientist
- Affiliation: CSIRO Manufacturing, Clayton, VIC, Australia
- Quote: This award is a great recognition of the excellent work done by Ph.D. student, Charlotte Wong, whose work focuses on understanding the Mg-Al-La and Mg-Al-Ce phase diagrams and the solidification pathways in he AE class of Mg alloys. Congratulations Charlotte!
- Other: "Experimental Study of the Solidification Microstructure in the Mg-Rich Corner of the Mg-Al-Ce System," Magnesium Technology 2018
|
2019
-
LMD Magnesium Technology Award - Student Paper
Charlotte Wong -
View Details
- Title: Student
- Affiliation: RMIT University, Carlton, VIC, Australia
- Quote: This award means a great deal to me. It is very affirming, and it is an honour to be recognized among the global research community. It proves that being passionate about what I do leads to success. TMS is a platform that provides opportunity for everyone to meet and share knowledge and idea in this global community.
- Other: "Experimental Study of the Solidification Microstructure in the Mg-Rich Corner of the Mg-Al-Ce System," Magnesium Technology 2018
|
2019
-
LMD Magnesium Technology Award - Student Paper
Suming Zhu -
View Details
- Title: Senior Research Fellow
- Affiliation: RMIT University, Carlton, VIC, Australia
- Other: "Experimental Study of the Solidification Microstructure in the Mg-Rich Corner of the Mg-Al-Ce System," Magnesium Technology 2018
|
2019
-
LMD Magnesium Technology Best Paper Award - Application
John Allison -
View Details
- Title: Professor
- Affiliation: The University of Michigan, Ann Arbor, MI
- Other: "Development of BioMg® 250 Bioabsorbable Implant Alloy," Magnesium Technology 2018
|
2019
-
LMD Magnesium Technology Best Paper Award - Application
Raymond Decker -
View Details
- Title: Chief Technical Officer
- Affiliation: Thixomat/nanoMAG, LLC, Livonia, MI
- Quote: Considering the continual high quality of the TMS-LMD-Magnesium Technology series, this is an honor, indeed. I'm proud to have been a member of TMS since joining as a University of Michigan student in 1950. I've benefited by attending many TMS meetings since then and made many good friends thereby. Most certainly, I have found that TMS activities have served well in keeping in touch with the latest technology in materials.
- Other: "Development of BioMg® 250 Bioabsorbable Implant Alloy," Magnesium Technology 2018
|
2019
-
LMD Magnesium Technology Best Paper Award - Application
Daniel LaCroix -
View Details
- Title: Student
- Affiliation: Michigan Technological University, Livonia, MI
- Quote: As a recent graduate, it is an honor to receive this award. After many years of schooling and lots of effort there, it's exciting for me to be able to apply what I've learned to real-life situations and to have that recognized.
- Other: "Development of BioMg® 250 Bioabsorbable Implant Alloy," Magnesium Technology 2018
|
|
2019
-
LMD Magnesium Technology Best Paper Award - Application
|