METALLURGICAL AND MATERIALS TRANSACTIONS A
TABLE OF CONTENTS
Volume 25A, No. 6, June 1994

This Month Featuring: Alloy Phases; Transformations; Transport Phenomena; Mechanical Behavior; Environment; and Solidification.

Alloy Phases

Communication: Cubic AlNi Compound Dispersed Mg-Based Amorphous Matrix Composites Prepared by Rapid Solidification [pp. 1323-1325]
A. Niikura, A.P. Tsai, A. Inoue, and T. Masumoto

Transformations

Microstructural Study of the Titanium Alloy Ti-15Mo-2.7Nb-3Al-0.2Si (TIMETAL 21S) [pp. 1109-1118]
K. Chaudhuri and J.H. Perepezko

to G Phase Transformation in Electrodeposited Iron-Zinc Alloy Coatings [pp. 1119-1125]
C.A. Drewien, J.I. Goldstein, and A.R. Marder

Computer Simulation of Diffusion in Multiphase Systems [pp. 1127-1134]
Anders Engström, Lars Hoglund, and John Ågren

Interstitial Precipitation in Fe-Cr-Al Alloys [pp. 1135-1146]
W.S. Spear and D.H. Polonis

Fracture and the Formation of Sigma Phase, M23C6, and Austenite from Delta-Ferrite in an AISI 304L Stainless Steel [pp. 1147-1158]
C.C. Tseng, Y. Shen, S.W. Thompson, M.C. Mataya, and G. Krauss

Transport Phenomena

Tritium Distribution at the Crack Tip of High-Strength Steels Submitted to Stress Corrosion Cracking [pp. 1159-1167]
A.M. Brass, J. Chene, and J. Gonzalez

Mechanical Behavior

Creep and Intergranular Cracking of Ni-Cr-Fe-C in 360°C Argon [pp. 1169-1183]
Thomas M. Angeliu and Gary S. Was

Hydride Embrittlement in ZIRCALOY-4 Plate: Part I. Influence of Microstructure on the Hydride Embrittlement in ZIRCALOY-4 at 20°C and 350°C [pp. 1185-1197]
J.B. Bai, C. Prioul, and D. François

Hydride Embrittlement in ZIRCALOY-4 Plate: Part II. Interaction between the Tensile Stress and the Hydride Morphology [pp. 1199-1208]
J.B. Bai, N. Ji, D. Gilbon, C. Prioul, and D. François

Anisotropic Plastic Potentials for Polycrystals and Application to the Design of Optimum Blank Shapes in Sheet Forming [pp. 1209-1216]
F. Barlat, K. Chung, and O. Richmond

Relationships of Slip Morphology, Microcracking, and Fracture Resistance in a Lamellar TiAl-Alloy [pp. 1217-1228]
K.S. Chan and Y.-W. Kim

Phosphorus and Carbon Segregation: Effects on Fatigue and Fracture of Gas-Carburized Modified 4320 Steel [pp. 1229-1240]
R.S. Hyde, G. Krauss, and D.K. Matlock

Superplastic Behavior of Two Ultrahigh Boron Steels [pp. 1241-1248]
J.A. Jiménez, G. González-Doncel, P. Acosta, and O.A. Ruano

The Effect of Low Gold Concentrations on the Creep of Eutectic Tin-Lead Joints [pp. 1249-1257]
P.A. Kramer, J. Glazer, and J.W. Morris, Jr.

Fiber Strength and Fiber/Matrix Bond Strength in Single Crystal Al2O3 Fiber Reinforced Ni3Al Based Composites [pp. 1259-1265]
S. Nourbakhsh, W.H. Rhee, O. Sahin, and H. Margolin

Comparison of Orthorhombic and Alpha-Two Titanium Aluminides as Matrices for Continuous SiC-Reinforced Composites [pp. 1267-1283]
P.R. Smith, J.A. Graves, and C.G. Rhodes

Communication: Influence of Near-Surface Microstructures on the Transient Current Response in Fe-Cr-Ni Alloys during Scratch Tests [pp. 1325-1331]
S.K. Varma, Monica M. de Lugo, A.H. Advani, and A. Bronson

Environment

Embrittlement of B2 Iron Aluminide by Water Vapor and by Hydrogen [pp. 1285-1290]
D.B. Kasul and L.A. Heldt

A Structural Study of Oxidation in a Zirconia-Toughened Alumina Fiber-Reinforced NiAl Composite [pp. 1291-1299]
S. Nourbakhsh, O. Sahin, and H. Margolin

Solidification

The Velocity of Solidification of Highly Undercooled Nickel [pp. 1301-1308]
B. Timothy Bassler, William F. Hofmeister, Gabriel Carro, and Robert J. Bayuzick

Numerical Modeling of Solidification and Subsequent Transformation of Fe-Cr-Ni Alloys [pp. 1309-1321]
T. Koseki, T. Matsumiya, W. Yamada, and T. Ogawa

Direct questions about this or any other Metallurgical and Materials Transactions page to mettrans@andrew.cmu.edu.

Search TMS Document Center Tables of Contents Subscriptions Met. and Mat. Trans. TMS OnLine