Met and Mat Trans Contents A: July 1995

METALLURGICAL AND MATERIALS TRANSACTIONS A

TABLE OF CONTENTS Volume 26A, No. 7, July 1995 This Month Featuring: Alloy Phases; Transformations; Mechanical Behavior; Physical Chemistry; Environment; Welding And Joining; Electronic, Magnetic, and Optical Material; Solidification; Materials Processing; Composite Materials. View July 1995 Abstracts.

METALLURGICAL AND MATERIALS TRANSACTIONS A

TABLE OF CONTENTS
Volume 26A, No. 7, July 1995

This Month Featuring: Alloy Phases; Transformations; Mechanical Behavior; Physical Chemistry; Environment; Welding And Joining; Electronic, Magnetic, and Optical Material; Solidification; Materials Processing; Composite Materials. View July 1995 Abstracts.

Alloy Phases

Pearlite Phase Transformation in Si and V Steel [pp. 1617-1631]
K. Han, G.D.W. Smith, and D.V. Edmonds

Alloy Design and Coarsening Phenomenon of L12 Precipitates in High-Temperature Al-2 At. Pct (Ti, V, Zr) Systems [pp. 1633-1639]
Seung Zeon Han, Seog Chul Chung, and Hyuck Mo Lee

Transformations

A New Theory and Kinetic Modeling of Strain-lnduced Precipitation of Nb(CN) in Microalloyed Austenite [pp. 1641-1657]
W.J. Liu

Effects of Cold Work on Precipitation in Al-Cu-Mg-(Ag) and Al Cu-Li(Mg-Ag) Alloys [pp. 1659-1671]
S.P. Ringer, B.C. Muddle, and I.J. Polmear

High-Temperature Metallurgy of Advanced Borated Stainless Steels [pp. 1673-1685]
C.V. Robino and M.J. Cieslak

On Grain and Subgrain Rotations in Two Dimensions [pp. 1687-1697]
T.O. Saetre and N. Ryum

Modeling Al Enrichment in Galvanized Coatings [pp. 1699-1704]
Nai-Yong Tang

Precipitation Hardening of Mg-Zn and Mg-Zn-RE Alloys [pp. 1705-1716]
L.Y. Wei, G.L. Dunlop, and H. Westengen

Recrystallization in Copper: Comparison between Techniques [pp. 1717-1724]
E. Woldt and D. Juul Jensen

Mechanical Behavior

The Effect of an Overload on the Rate of Fatigue Crack Propagation under Plane Stress Conditions [pp. 1725-1733]
H. Bao and A.J. McEvily

Anelastic Behavior of Barium-Titanate-Based Ceramic Materials [pp. 1735-1739]
W. Duffy, Jr., B.L. Cheng, M. Gabbay, and G. Fantozzi

Can the Average Particle Section Size in a Metallographic Plane Be Larger Than the True Average Particle Size In a Three-Dimensional Microstructure? [pp. 1741-1744]
Pascal Louis and Arun M. Gokhale

Compatibility of Deformation in Two-Phase Ti-Al Alloys: Dependence on Microstructure and Orientation Relationships [pp. 1745-1756]
J. Luster and M.A. Morris

Energy Dissipation Efficiency in Aluminum Dependent on Monotonic Flow Curves and Dynamic Recovery [pp. 1757-1766]
H.J. McQueen, E. Evangelista, N. Jin, and M.E. Kassner

Unconstrained and Constrained Tensile Flow and Fracture Behavior of an Nb-1.24 At. Pct Si Alloy [pp. 1767-1776]
M.G. Mendiratta, R. Goetz, D.M. Dimiduk, and J.J. Lewandowski

The Role of Hydrogen in Stress-Corrosion Cracking of Austenitic Stainless Steel in Hot MgCl₂ Solution [pp. 1777-1784]
L. Qiao, X. Mao, and W. Chu

The Influence of Heat Treatment on the High-Stress Abrasion Resistance and Fracture Toughness of Alloy White Cast Irons [pp. 1785-1793]
I.R. Sare and B.K. Arnold

Modeling Microstructural Development during the Forging of Waspaloy [pp. 1795-1803]
Gangshu Shen, S.L. Semiatin, and Rajiv Shivpuri

Design of Multiscalar Metallic Multilayer Composites for High Strength, High Toughness, and Low CTE Mismatch [pp. 1805-1813]
D.J. Srolovitz, S.M. Yalisove, and J.C. Bilello

The Creep-Damage Constitutive and Life Predictive Model of Nickel-Base Single-Crystal Superalloys [pp. 1815-1821]
Z.F. Yue, Z.Z. Lu, and C.Q. Zheng

Communication: In Situ Method of Following the Reactivity between SiC and Liquid Aluminum [pp. 1904-1906]
S. Gowry and M. Bouchard

Physical Chemistry

Fracture Behavior of Quaternary Al-Li-Cu-Mg Alloy under Mixed Mode I/III Loading [pp. 1823-1833]
N. Eswara Prasad and S.V. Kamat

Environment

Oxidation of Ductile Particle Reinforced Ti-48Al Composite [pp. 1835-1845]
S.A. Kekare, J.B. Toney, and P.B. Aswath

Welding and Joining

Influence of Microstructural Variations in the Weldment on the High-Temperature Corrosion of 2.25Cr-lMo Steel [pp. 1847-1858]
R.K. Singh Raman

Effect of Ferrite Transformation on the Tensile and Stress Corrosion Properties of Type 316 L Stainless Steel Weld Metal Thermally Aged at 873 K [pp. 1859-1868]
H. Shaikh, H.S. Khatak, S.K. Seshadri, J.B. Gnanamoorthy, and P. Rodriguez

Electronic, Magnetic, and Optical Material

Magnetic Properties of Maraging Steels in Relation to Nickel Concentration [pp. 1869-1876]
M. Ahmed, K. Hasnain, I. Nasim, and H. Ayub

Solidification

In Situ Synthesis of TiC Particulate-Reinforced Aluminum Matrix Composites [pp. 1877-1884]
Tetsuya Nukami and Merton C. Flemings

Materials Processing

Interactions between Sic Fibers and a Titanium Alloy during Infrared Liquid Infiltration [pp. 1885-1894]
Sunil G. Warrier and Ray Y. Lin

Composite Materials

Thermodynamically Stable [Ni(Al,Ti)]-,'[Ni2AlTi]-'[Ni3(Al,Ti)] Metal-Metal Composites [pp. 1895-1903]
L.C. Hsiung and H.K.D.H. Bhadeshia

Communication: Effect of Process Parameter Variability on HIP Consolidation of Continuous-Fiber, Metal-Matrix Composites Made from Foil/Fiber/Foil Layups [pp. 1906-1908]
P.D. Nicolaou, S.L. Semiatin, and W.H. Zimmer

Other

Correction [p. 1909]

Direct questions about this or any other Metallurgical and Materials Transactions page to mettrans@andrew.cmu.edu.

Search TMS Document Center Tables of Contents Subscriptions Met. and Mat. Trans. TMS OnLine