METALLURGICAL AND MATERIALS TRANSACTIONS A
TABLE OF CONTENTS
Volume 27A, No. 11, November 1996

This Month Featuring: Alloy Phases; Transformations; Transport Phenomena; Mechanical Behavior; Physical Chemistry; Environment; Welding & Joining; Surface Treatment; Materials Processing; Composite Materials. View November 1996 Abstracts.

Alloy Phases

An Isothermal Section at 550°C in the Al-Rich Corner of the Al-Fe-Mn-Si System [pp. 3357-3361]
G. Davignon, A. Serneels, B. Verlinden, and L. Delaey

Transformations

High-Resolution Transmission Electron Microscopy Investigation of the Face-Centered Cubic/Hexagonal Close-Packed Martensite Transformation in Co-31.8 Wt Pct Ni Alloy: Part 1. Plate Interfaces and Growth Ledges [pp. 3362-3370]
D.W. Bray and J.M. Howe

High-Resolution Transmission Electron Microscopy Investigation of the Face-Centered Cubic/Hexagonal Close-Packed Martensite Transformation in Co-31.8 Wt Pct Ni Alloy: Part 2. Plate Intersections, Extended Defects, and Nucleation Mechanisms [pp. 3371-3380]
D.W. Bray and J.M. Howe

A Model Describing Neutron Irradiation-Induced Segregation to Grain Boundaries in Dilute Alloys [pp. 3381-3390]
R.G. Faulkner,Shenhua Song, and P.E.J. Flewitt

Preferential Coarsening of " Precipitates in INCONEL 718 During Creep [pp. 3391-3398]
Ming Gao, Shuchun Chen, D. Gary Harlow, and Robert P. Wei

Austenite Grain Growth Kinetics in Al-Killed Plain Carbon Steels [pp. 3399-3409]
Matthias Militzer, Alan Giumelli, E. Bruce Hawbolt, and T. Ray Meadowcroft

Modeling Recovery and Recrystallization Kinetics in Cold-Rolled Ti-Nb Stabilized Interstitial-Free Steel [pp. 3410-3423]
K. Mukunthan and E.B. Hawbolt

The Effect of Metallic Elements on the Crystallization Behavior of Amorphous Fe-Si-B Alloys [pp. 3424-3430]
T. Naohara

On the Effect of Stress on Nucleation and Growth of Precipitates in an Al-Cu-Mg-Ag Alloy [pp. 3431-3444]
B. Skrotzki, G.J. Shiflet, and E.A. Starke, Jr.

Crystallographic Preferred Orientation Induced by Cyclic Rolling Contact Loading [pp. 3445-3465]
A.P. Voskamp and E.J. Mittemeijer

M2C Precipitates in Isothermal Tempering of High Co-Ni Secondary Hardening Steel [pp. 3466-3472]
Choong Hwa Yoo, Hyuck Mo Lee, Jin W. Chan, and John W. Morris, Jr.

Transport Phenomena

Analysis of Mean Square Penetration Depth in Grain Boundary Diffusion Mechanical Behavior [pp. 3473-3477]
Y.T. Chou, Y.Z. Li, and C.T. Liu

Mechanical Behavior

Hot Deformation Mechanisms of a Solution-Treated Al-Li-Cu-Mg-Zr Alloy [pp. 3478-3490]
G. Avramovic-Cingara, D.D. Perovic, and H.J. McQueen

Plastic Zones and Fatigue-Crack Closure Under Plane-Strain Double Slip [pp. 3491-3502]
Ken Gall, Huseyin Sehitoglu, and Yavuz Kadioglu

The Plastic Anisotropy of an Al-Li-Cu-Zr Alloy Extrusion in Unidirectional Deformation [pp. 3503-3512]
M.T. Lyttle and J.A. Wert

Characterization of the Wear Response of a Modified Zinc-Based Alloy vis-à-vis a Conventional Zinc-Based Alloy and a Bearing Bronze at a High Sliding Speed [pp. 3513-3523]
B.K. Prasad, A.K. Patwardhan, and A.H. Yegneswaran

Influence of Interstitials on the Mechanical Properties of Metallic Materials [pp. 3524-3529]
R.E. Reed-Hill, C.V. Iswaran, and M.J. Kaufman

Effects of Alkali-Metal Impurities on Fracture Toughness of 2090 Al-Li-Cu Extrusions [pp. 3530-3541]
E.D. Sweet, S.P. Lynch, C.G. Bennett, R.B. Nethercott, and I. Musulin

Manifestations of Dynamic Strain Aging in Soft-Oriented NiAl Single Crystals [pp. 3542-3557]
M.L. Weaver, M.J. Kaufman, and R.D. Noebe

The Cracking Mechanism of Silicon Particles in an A357 Aluminum Alloy [pp. 3558-3568]
Jien-Wei Yeh and Wen-Pin Liu

Communication: The Behavior of Internal Markers in Ti-6Al-4V Deformed in Superplastic Tension [pp. 3747-3748]
P.L. Blackwell and P.S. Bate

Physical Chemistry

Thermodynamic Activities and Partial Enthalpies of Mixing in the Solid Solution of Fe in Ni3Al [pp. 3569-3575]
M. Albers, D. Kath, and K. Hilpert

Thermochemistry of the Ni-Hf System--Intermetallic Phases [pp. 3576-3590]
László Bencze and Klaus Hilpert

Thermodynamic Assessment of the Nb-N System [pp. 3591-3600]
Weiming Huang

Environment

Microstructural Aspects of Sulfide Stress Cracking in an API X-80 Pipeline Steel [pp. 3601-3601]
H.F. López, R. Raghunath, J.L. Albarran, and L. Martinez

Welding & Joining

Solidification of an Alloy 625 Weld Overlay [pp. 3612-3620]
J.N. DuPont

Transient Liquid-Phase Bonding in the NiAl/Cu/Ni System -- A Microstructural Investigation [pp. 3621-3629]
W.F. Gale and Y. Guan

A Model for Coupled Growth of Reaction Layers in Reactive Brazing of ZrO2-Toughened Al2O3 [pp. 3630-3638]
T. Torvund, Ø. Grong, O.M. Akselsen, and J.H. Ulvensøen

The Wear Behavior Between Hardfacing Materials [pp. 3639-3648]
Weite Wu and Lung-Tien Wu

Surface Treatment

The Growth and Structure of Thin Oxide Films on Cerium Ion-Implanted Nickel [pp. 3649-3661]
F. Czerwinski, J.A. Szpunar, and W.W. Smeltzer

Influence of Plastic Deformation upon the Half-Width of Engineering Metallic Materials in Hard State [pp. 3662-3668]
J.B. Li, H.B. Xu, R. Chen, and Z.G. Wang

Materials Processing

Permeability of Microporous Carbon Preforms [pp. 3669-3674]
S.K. Datta, N. Simhai, S.N. Tewari, J.E. Gatica, and M. Singh

High-Temperature Deformation and Failure of an Orthorhombic Titanium Aluminide Sheet Material [pp. 3675-3681]
P.D. Nicolaou and S.L. Semiatin

Determination of Hydrogen in Titanium Alloys by Cold Neutron Prompt Gamma Activation Analysis [pp. 3682-3687]
Rick L. Paul, Hugh M. Privett III, Richard M. Lindstrom, Wade J. Richards, and Robert R. Greenberg

Synthesis of RuAl by Reactive Powder Processing [pp. 3688-3699]
I.M. Wolff

Composite Materials

Thermal Expansion of Metals Reinforced with Ceramic Particles and Microcellular Foams [pp. 3700-3717]
D.K. Balch, T.J. Fitzgerald, V.J. Michaud, A. Mortensen, Y.-L. Shen, and S. Suresh

Microstructural Changes in a Mechanically Alloyed Al-6.2Zn-2.5Mg-1.7Cu Alloy (7010) With and Without Particulate SiC Reinforcement [pp. 3718-3726]
A. Bhaduri, V. Gopinathan, P. Ramakrishnan, and A.P. Miodownik

Wear and Friction Behavior of Metal Impregnated Microporous Carbon Composites [pp. 3727-3738]
Gultekin Goller, D.P. Koty, S.N. Tewari, M. Singh, and A. Tekin

Reinforcement Shape Effects on the Fracture Behavior and Ductility of Particulate-Reinforced 6061-Al Matrix Composites [pp. 3739-3746]
S.G. Song, N. Shi, G.T. Gray III, and J.A. Roberts

Direct questions about this or any other Metallurgical and Materials Transactions page to mettrans@andrew.cmu.edu.

Search TMS Document Center Tables of Contents Subscriptions Met. and Mat. Trans. TMS OnLine