Met and Mat Trans Contents A: September 1997

METALLURGICAL AND MATERIALS TRANSACTIONS A

TABLE OF CONTENTS Volume 28A, No. 9, September 1997 This Month Featuring: Alloy Phases; Transformations; Mechanical Behavior; Solidification; Materials Processing; Composite Materials. View September 1997 Abstracts.

METALLURGICAL AND MATERIALS TRANSACTIONS A

TABLE OF CONTENTS
Volume 28A, No. 9, September 1997

This Month Featuring: Alloy Phases; Transformations; Mechanical Behavior; Solidification; Materials Processing; Composite Materials. View September 1997 Abstracts.

Alloy Phases

A Thermodynamic Description of the Al-Mg-Zn System [pp. 1725-1734]
H. Liang, S.-L. Chen, and Y.A. Chang

Transformations in ₂ + Titanium Aluminide Alloys Containing Molybdenum: Part I. Solidification Behavior [pp. 1735-1743]
A.K. Singh and D. Banerjee

Transformations in ₂ + Titanium Aluminide Alloys Containing Molybdenum: Part II. Heat Treatment [pp. 1745-1753]
A.K. Singh and D. Banerjee

Transformations

A Variant Selection Model for Predicting the Transformation Texture of Deformed Austenite [pp. 1755-1768]
M.P. Butrón-Guillén, C.S. Da Costa Viana, and J.J. Jonas

Precipitation Behavior in Ultra-Low-Carbon Steels Containing Titanium and Niobium [pp. 1769-1780]
M. Hua, C.I. Garcia and A.J. DeArdo

Communication: Element Partitioning during Coarsening of ( - ') Ni-Al-Mo Alloys [pp. 1943-1945]
M. Fährmann, E. Fährmann, T.M. Pollock, and W.C. Johnson

Mechanical Behavior

Strain Hardening Regimes and Microstructural Evolution during Large Strain Compression of Low Stacking Fault Energy Fcc Alloys That Form Deformation Twins [pp. 1781-1795]
Sirous Asgari, Ehab El-Danaf, Surya R. Kalidindi, and Roger D. Doherty

Fracture Toughness and Fatigue Crack Growth in Rapidly Quenched Nb-Cr-Ti In Situ Composites [pp. 1797-1808]
K.S. Chan, D.L. Davidson, and D.L. Anton

Thermal Cycling Behavior of As-Quenched and Aged Ti-6Al-4V Alloy [pp. 1809-1814]
Hongbin Geng, Shiyu He and Tingquan Lei

Elevated Temperature Fracture Toughness of Al-Cu-Mg-Ag Sheet: Characterization and Modeling [pp. 1815-1830]
Michael J. Haynes and Richard P. Gangloff

A Thermodynamic Analysis of the Empirical Power Relationships for Creep Rate and Rupture Time [pp. 1831-1842]
A.J. Krasowsky and L. Toth

High-Temperature Tensile Ductility in WC-Co Cemented Carbides [pp. 1843-1847]
I.C. Lee and T. Sakuma

Compressive Creep Behavior of Spray-Formed Gamma Titanium Aluminide [pp. 1849-1857]
B. Li, J. Wolfenstine, J.C. Earthman and E.J. Lavernia

Strengthening Effects in AC8A/Al₂O₃ Short-Fiber Composites as a Function of Temperature and Strain Rate [pp. 1859-1869]
C.S. Liauo and J.C. Huang

Wear Characteristics of TiNi Shape Memory Alloys [pp. 1871-1877]
H.C. Lin, H.M. Liao, J.L. He, K.C. Chen, and K.M. Lin

Microtexture and Grain Boundary Evolution during Microstructural Refinement Processes in SUPRAL 2004 [pp. 1879-1887]
Terry R. McNelley and Michael E. McMahon

Communication: Formation of the Al-Rich Phase on Grain Boundary and the Creep Damage Mechanism in Directionally Solidified Ni-Base Superalloy [pp. 1945-1949]
S. Komazaki and T. Shoji

Solidification

Solidification Paths and Carbide Morphologies in Melt-Processed MoSi₂-SiC In Situ Composites [pp. 1889-1900]
Daniel J. Tilly, Jan P.A. Löfvander, and Carlos G. Levi

Interfaces in MoSi₂-SiC In Situ Composites Synthesized by Melt Processing [pp. 1901-1911]
Daniel J. Tilly, Jan P.A. Löfvander, Marc DeGraef, and Carlos G. Levi

Materials Processing

High Strain Rate Torsional Behavior of an Ultrahigh Carbon Steel (1.8 Pct C-1.6 Pct Al) at Elevated Temperature [pp. 1913-1920]
Manuel Carsi, Felix Peñalba, Oscar A. Ruano, and Oleg D. Sherby

Optimization of Microstructure Development during Hot Working Using Control Theory [pp. 1921-1930]
James C. Malas III, W. Garth Frazier, S. Venugopal, Enrique A. Medina, Steven Medeiros, Raghavan Srinivasan, R. Dennis Irwin, W.M. Mullins, and Anil Chaudhary

Communication: Nitridation of Ti-Al Alloys: A Thermodynamic Approach [pp. 1949-1951]
R. Schmid-Fetzer and K. Zeng

Composite Materials

In Situ Ceramic Particle-Reinforced Aluminum Matrix Composites Fabricated by Reaction Pressing in the TiO₂ (Ti)-Al-B (B₂O₃) Systems [pp. 1931-1942]
Z.Y. Ma and S.C. Tjong

Communication: Wear Behavior of As-Cast ZnAl27/SiC Particulate Metal-Matrix Composites under Lubricated Sliding Condition [pp. 1951-1955]
S.C. Tjong and F. Chen

Direct questions about this or any other Metallurgical and Materials Transactions page to mettrans@andrew.cmu.edu.

Search TMS Document Center Tables of Contents Subscriptions Met. and Mat. Trans. TMS OnLine