Symposium |
Presentation Title |
Presenter and Affiliation |
Integrated Computational Metallurgical Engineering |
Develop ICME Tool for High Ductility Cast Aluminum Alloys for
Automotive Body Applications |
Mei Li, Ford |
Integrated Computational Metallurgical Engineering |
Advances in Aluminium ICME |
Jürgen Hirsch, Hydro |
Integrated Computational Metallurgical Engineering |
Application of ICME to Hot Mill Process Parameter Control for Sheet
Aluminum Products |
Nitin Singh , Novelis |
Recycling |
Aluminum Recovery and Recycling for the 21st Century: Challenges and Opportunities |
Diran Apelian, WPI |
Forming and Joining |
Meeting Vehicle Lightweighting Challenges with Aluminum |
Anil Sachdev, GM |
Forming and Joining |
Path Independent Forming Limit Diagram for
Sheet Forming |
JW Yoon, Swinburne University |
Forming and Joining |
Material Testing and Modeling of Aluminum
Alloy Sheet and Tube in Support of Forming Simulations |
Toshihiko Kuwabara, Tokyo University of Agriculture and Technology |
Phase Transformations |
Nanocluster Formation Behavior in Al-Zn-Mg
Alloys with Microalloying Elements and Improved Mechanical Properties |
Tatsuo Sato, Tokyo Institute of Technology |
Phase Transformations |
Precipitation and Transformation of
Metastable Phase in Al-Mg-Si Alloy |
Kenji Matsuda, University of Toyama |
Phase Transformations |
Precipitation in Al-Cu-Li Alloys: from the
Kinetics of T1 Phase Precipitation to Microstructure Development in Friction
Stir Welds |
Alexis Deschamps, Grenoble Institute of Technology |
Thermo-mechanical Treatment |
Characterization of Metal Flow in Metals
Processing by a Combined Approach using Advanced Experimental Grid Pattern
Techniques Coupled with FE-analysis |
Henry Valberg, Norwegian University of Science and Technology |
Thermo-mechanical Treatment |
Hot Extrusion of Aluminum Chips |
A. E Tekkaya, TU Dortmund |
Fatigue and Fracture Toughness |
Effect of Fatigue and Damage Tolerance
Material Properties on the Efficiency of Aircraft Structures |
Hans-Jürgen Schmidt, AeroStruc |
Fatigue and Fracture Toughness |
Damage Tolerance Applied to the Design of
Mid-Size Aircraft |
Carlos Chaves, Embraer |
Fatigue and Fracture Toughness |
Material Evaluation Methodology for Fatigue
and Fatigue Crack Growth Critical Structures – an Aluminum Supplier
Perspective |
Bob Bucci, Alcoa |
Fatigue and Fracture Toughness |
Fracture
Mechanisms in Al-Cu-Li Alloys |
JC Ehrström, Constellium |
Advanced Analysis |
Atom-Probe Tomography and the Science of a
New Class of Al-Sc Based Alloys |
David Seidman, NWU |
Solidification and Casting |
It’s Not Your Father’s Cast House Any More |
Bob Wagstaff, Novelis |
Solidification and Casting |
Microstructural Modification Mechanisms and
Integrated Thermal Management for Local Microstructure Control in Aluminum
Castings |
Ralph Napolitano, Iowa State |
Solidification and Casting |
Microstructure Development and Control in
Hypereutectic Cast Al-Si Alloy Evaluated by Metallurgical Analysis and
Neutron Diffraction |
Wojciech Kasprzak, NRC |
Solidification and Casting |
The Evolution of Mushy Zones in Four
Dimensions |
Peter Voorhees, NWU |
Novel Materials |
Enhanced Performance of Layered/Laminated
Aluminum Systems |
John Lewandoski, Case Western |
Novel Materials |
Microcellular Aluminium by Replication |
Andreas Mortenson, Ecole Polytechnique Fédérale de Lausanne (EPFL) |
Novel Materials |
Nanostructured Materials: From the
Nanoscale to the Microscale |
Enrique J. Lavernia, UC Davis |
Corrosion |
Application of Microelectrochemical Methods
for Understanding Localized Corrosion Behavior of Aluminum Alloys |
Rudi Buchheit, OSU |
Coating and Surfaces |
Measurements of Adhesion and Adhesion
Degradation for Organic Coatings on Metals |
Gerald Frankel, OSU |