METALLURGICAL AND MATERIALS TRANSACTIONS B
CONTENTS
Volume 29B, No. 3, June 1998

This Month Featuring: The 1997 Edward DeMille Campbell Memorial Lecture; Composite Materials; Hydrometallurgy; Pyrometallurgy; Transport Phenomena; Physical Chemistry; Solid State Reactions; Materials Processing; Mathematical Modeling. View June 1998 Abstracts.

The 1997 Edward DeMille Campbell Memorial Lecture

Grain Boundary Cracking [pp. 509-518]
Paul G. Shewmon

Composite Materials

Chemical Reactions between Aluminum and Fly Ash during Synthesis and Reheating of Al-Fly Ash Composite [pp. 519-525]
R.Q. Guo and P.K. Rohatgi

Hydrometallurgy

Physicochemical and Structural Factors in the Sulfuric Acid Leaching of Nickel- and Copper-Bearing Synthetic Birnessites [pp. 527-540]
Rakesh Kumar and S. Das

Pyrometallurgy

Experimental Study of Phase Equilibria in the Systems PbOx-CaO and PbOx-CaO-SiO2 [pp. 541-553]
Evgueni Jak, Naigang Liu, and Peter C. Hayes

Tellurium Distribution in Copper Anode Slimes Smelting [pp. 555-562]
D.R. Swinbourne, G.G. Barbante, and A. Sheeran

Transport Phenomena

Liquid-Solid Mass Transfer from a Wall in Contact with a Gas/Liquid Interface Undergoing Wave Motion [pp. 563-567]
Z.D. Chen and J.J.J. Chen

Mixing Time and Fluid Flow Phenomena in Liquids of Varying Kinematic Viscosities Agitated by Bottom Gas Injection [pp. 569-575]
Manabu Iguchi, Kei-Ichi Nakamura and Ryoji Tsujino

Physical Chemistry

A Thermodynamic Study of Ru-Sn Binary Alloys [pp. 577-581]
Ryo Kawabata, Munetaka Myo-Chin, and Masanori Iwase

Effects of CaO, Al2O3, and MgO Additions on the Copper Solubility, Ferric/Ferrous Ratio, and Minor-Element Behavior of Iron-Silicate Slags [pp. 583-590]
Hang Goo Kim and H.Y. Sohn

Thermodynamic Modeling of Liquid Fe-Ni-Cu-Co-S Mattes [pp. 591-601]
Florian Kongoli, Yves Dessureault, and Arthur D. Pelton

Solid State Reactions

Investigation of Mechanochemical Reactions Between Zircon (ZrSiO4) and Alkaline Earth Metal Oxides [pp. 603-610]
N.J. Welham

Materials Processing

Modeling the Microstructural Changes during Hot Tandem Rolling of AA5XXX Aluminum Alloys: Part I. Microstructural Evolution [pp. 611-620]
M.A. Wells, D.J. Lloyd, I.V. Samarasekera, J.K. Brimacombe, and E.B. Hawbolt

Modeling the Microstructural Changes during Hot Tandem Rolling of AA5XXX Aluminum Alloys: Part II. Textural Evolution [pp. 621-633]
M.A. Wells, D.J. Lloyd, I.V. Samarasekera, J.K. Brimacombe, and E.B. Hawbolt

The Mechanism of Formation of TiB2 Particulates Prepared by In Situ Reaction in Molten Aluminum [pp. 635-640]
B. Yang, Y.Q. Wang, and B.L. Zhou

Mathematical Modeling

Investigation of Inclusion Re-Entrainment from the Steel-Slag Interface [pp. 641-649]
D. Bouris and G. Bergeles

Model for Temperature Profile Estimation in the Refractory of a Metallurgical Ladle [pp. 651-659]
T.P. Fredman and H. Saxén

A Computational Model for the Prediction of Steel Hardenability [pp. 661-672]
M. Victor Li, David V. Niebuhr, Lemmy L. Meekisho, and David G. Atteridge

Constrained Sintering of a Sphere with Radial Density Gradient: Viscous Model [pp. 673-678]
Jie Luo, Yuhe Ren, and R. Stevens

Fluid Flow in Casting Rigging Systems: Modeling, Validation, and Optimal Design [pp. 679-690]
Robert M. McDavid and Jonathan A. Dantzig

Simplified Simulation of the Transient Behavior of Temperatures in the Upper Shaft of the Blast Furnace [pp. 691-697]
Henrik Saxén

A Three-Dimensional Model of the Spray Forming Method [pp. 699-708]
Hyun-Kwang Seok, Dong-Hun Yeo, Kyu Hwan Oh, Ho-in Lee, and Hyung Yong Ra

Modeling the Microstructural Changes during Hot Tandem Rolling of AA5XXX Aluminum Alloys: Part III. Overall Model Development and Validation [pp. 709-719]
M.A. Wells, D.J. Lloyd, I.V. Samarasekera, J.K. Brimacombe, and E.B. Hawbolt

Table of Contents, Metallurgical and Materials Transactions A, June 1998

Direct questions about this or any other Metallurgical and Materials Transactions page to mettrans@andrew.cmu.edu.

Search TMS Document Center Tables of Contents Subscriptions Met. and Mat. Trans. TMS OnLine