"AA3104 Can-Body Stock Ingot: Characterization and Homogenization" (Research Summary), R.G. Kamat, June 1996, pp. 34-38.

"An Adaptive Feed Strategy for a Center-Break Reduction Cell" (Research Summary), J.S. McKenna, F.K. Omani, and T. Nyadziehe, November 1993, pp. 44-47.

"Additives and the Corrosion Resistance of Aluminosilicate Refractories in Molten Al-5Mg" (Research Summary), M. Allahevrdi, S. Afshar, and C. Allaire, February 1998, pp. 30-34.

"Advances in the Resistance Welding of Automotive Aluminum" (Innovations in Aluminum, Part I), C.L. Tsai, May 1997, pp. 28-30.

"Advances in Thermal Management Materials for Electronic Applications" (Commentary), S. Jin, June 1998, p. 46.

"Advancing the Hall-Héroult Electrolytic Process" (JOM-e: Overview), B.J. Welch, August 2000.

"Al Alloys: The Influence of Concurrent Precipitation on Recyrstallization Behavior, Kinetics, and Texture" (Overview), J.G. Morris and W.C. Liu, November 2005, pp. 44-47.

"Al and the Dynamics of Change" (Economics), G.T. Haymaker, Jr., May 1996, pp. 16-18.

"The Alcan Process for Inert Gas Dross Cooling" (Forum Environment), P. Whiteley, A.B. Innus, J.C. Pomerleau, and P. Bouchard, February 1991, pp. 52, 53.

"Alumina Production in Russia Part I: Historical Background" (Overview), V. Smirnov, August 1996, pp. 24-26.

"The Aluminium of Siberia 2004 Conference and Exhibition" (Conference Review), V. Buzunov, February 2005, pp. 27-30.

"Aluminum: Approaching the New Millennium" (Overview), H.A. Øye, N. Mason, R.D. Peterson, N.E. Richards, E.L. Rooy, F.J. Stevens McFadden, R.D. Zabreznik, F.S. Williams, and R.B. Wagstaff, February 1999, pp. 29–42.

"Aluminum Cast House Technology" (Conference Review), M. Nilmani and P. Whiteley, May 1996, pp. 13, 14.

"Aluminum Composites for Automotive Applications: A Global Perspective" (Overview), V.M. Kevorkijan, November 1999, pp. 54–58.

"Aluminum Exhibits Its Versatility in Art, Life" (Featured Overview), M. Byko, November 2000, pp. 9-12.

"Aluminum Extrusion Research and Education at RPI" (Education), W.Z. Misiolek and R.N. Wright, February 1993, pp. 24, 25.

"Aluminum Fabrication and Applications" (Overview), E.L. Rooy, August 2000.

"Aluminum Furnaces: Improving Low Cement Castables by Non-Wetting Additives" (Overview), Saied Afshar and Claude Allaire, August 2001, pp. 24-27.

"The Aluminum Industry and NAFTA: Opportunity or Threat?" (Economics), D.L. Moison, February 1993, p. 26.

"Aluminum: New Challenges in Downstream Activities" (Overview), M.N. Becker, November 1999, pp. 26–38.

"Aluminum Production Paths in the New Millennium" (Overview), B.J. Welch, May 1999, pp. 24–28.

"An Aluminum Reclaimer for Small Foundry Applications" (Overview), D.E. Groteke, May 1998, pp. 46-47.

"Aluminum Reduction Technology-Where to from Here?" (Opinion), A.T. Tabereaux, August 2000, pp. 35-39.

"Aluminum Solidification Processing: Prospective and Retrospective Views of the Industry and the Field" (Overview), D. Apelian, August 2000.

"Alumi-Nuts Take a Shine to Aluminum" (Feature), Maureen Byko, February 2001, pp. 11-12.

"Amorphous Aluminum Alloys—Synthesis and Stability" (Overview), John H. Perepezko and Rainer J. Hebert, March 2002, pp. 34-39.

"Analyzing and Monitoring Aluminum Smelter Performance via Web Browsers" (Featured Overview), M. de Souza Baltar, E.F.V. da Silva, and C. Seixas Filho, August 1998, pp. 14-16.

"The Anisotropy of Aluminum and Aluminum Alloys" (Overview), W.F. Hosford, May 2006, pp. 70-74.

"Anode Butt Cores: Physical Characterization and Reactivity Measurements" (Research Summary), U. Suriyapraphadilok, P. Halleck, A. Grader, and J.M. Andresen, February 2005, pp. 35-41.

"Anode Effects, PFCs, Global Warming, and the Aluminum Industry" (Overview), A.T. Tabereaux, November 1994, pp. 30, 31, 33, 34.

"Applications for the Strontium Treatment of Wrought and Die-Cast Al" (Research Summary), B. Kulunk and D.J. Zuliani, October 1996, pp. 60-63.

"Applying Case-Based Reasoning to Aluminum Smelting Problems" (Overview), G. Pauley, February 1993, p. 22.

"Assuring the Continued Recycling of Light Metals in End-of-Life Vehicles: A Global Perspective" (Overview), A. Gesing, August 2004, pp. 18-27.

"An Atomization Technique for Upgrading Automotive Al Scrap" (1995 Fall Extractive Meeting Preview: Secondary Aluminum), K.P. Olsen, G. Sterzik, and H. Henein, October 1995, pp. 14, 15.

"The August JOM-e: The Aluminum Plenary Session" (Commentary), J.J. Robinson, August 2000, p. 34.

"Automobile Bodies: Can Aluminum Be an Economical Alternative to Steel?" (Economics), Anish Kelkar, Richard Roth, and Joel Clark, August 2001, pp. 28-32.

"Back to Kitty Hawk: Investigating the First Aircraft Aluminum" (Featured Overview), M. Goodway and R.A. Leyes III, November 1993, pp. 16-18, 20-22.

"Bath Chemistry and Aluminum Cell Performance--Facts, Fictions, and Doubts" (Overview), H. Kvande, November 1994, pp. 22-28.

"Building Useful and User-Friendly Computer Models of Metallurgical Processes" (Featured Overview), R.T. Bui, February 1992, pp. 16-22.

"Cairo University and EgyptAlum: 20 Years of Cooperation in Aluminum Reduction" (Overview), Saad El-Raghy and Zaki Bassiony, May 2003, pp. 48-52.

"Carbon Cathode Materials: Approval and Quality Control Procedures" (Overview), H.A. Øye, February 1995, pp. 14-18, 21.

"A Case History: Implementing ISO 9000 at Alumax of South Carolina's Mt. Holly Facility" (Industrial Insight), L. Creel, August 1993, pp. 12-14.

"Casting Al Sheets on a Lab-Scale, Single-Roll, Continuous Sheet Caster" (Research Summary), S.P. Mehrotra, M.R.R.I. Shamsi, and P.N. Bid, August 1995, pp. 18-21.

"Casting Defects in Low-Pressure Die-Cast Aluminum Alloy Wheels" (Overview), B. Zhang, S.L. Cockcroft, D.M. Maijer, J.D. Zhu, and A.B. Phillion, November 2005, pp. 36-43.

"Cathode Performance: The Influence of Design, Operations, and Operating Conditions" (Overview), H.A. Øye and B.J. Welch, February 1998, pp. 18-23.

"Cathodic Phenomena in Aluminum Electrowinning" (Overview), J. Bouteillon, J.C. Poignet, and J.J. Rameau, February 1993, pp. 28-30.

"Cell Operation and Metal Purity Challenges for the Use of Inert Anodes" (Overview), Jomar Thonstad and Espen Olsen, May 2001, pp. 36-38.

"Characterizing Al Tailor-Welded Blanks for Automotive Applications" (Overview), R.W. Davies, H.E. Oliver, M.T. Smith, and G.J. Grant, November 1999, pp. 46–50.

"Cell Voltage in Aluminum Electrolysis: A Practical Approach" (Overview), H. Kvande and W. Haupin, February 2000, pp. 31, 33-37.

"Characterizing Emissions from a Söderberg Aluminum Smelter" (Research Summary), B.P. Leber, Jr., and P.F. Schmeil, May 1995, pp. 20, 21.

"Characterizing Aluminum Sintering Using In-Situ NDE" (Research Summary), J.C. Foley and D.K. Rehbein, May 2000, pp. 38-39.

"Characterizing the Physical and Chemical Properties of Aluminum Dross" (Research Summary), O. Manfredi, W. Wuth, and I. Bohlinger, November 1997, pp. 48-51.

"CIS Al and the Environment: Opportunity or Threat?" (Opinion), P. Jones, June 1992, p. 6.

"Clay Alumina Brick Used in Anode Baking Furnaces" (Overview), G.F. Corliss and M.A. Stett, November 1996, pp. 29-32.

"The Closed-Circuit Degassing of Liquid Aluminum by Argon" (Innovations in Aluminum, Part I), R.A. Rapp, May 1997, pp. 16-19.

"The Closed-Circuit Degassing/Fluxing of Liquid Aluminum Alloys by Nitrogen-Chlorine" (Innovations in Aluminum, Part I), R.A. Rapp, May 1997, pp. 21-23.

"Comparing Hydrogen Testing Methods for Wrought Aluminum" (Testing & Analysis), X.-G. Chen, F.-J. Klinkenberg, S. Engler, L. Heusler, and W. Schneider, August 1994, pp. 34-38.

"Computer-Aided Engineering Software for Semi-Solid Metal Manufacturing" (Overview), G.P. Backer, August 1998, pp. 21-23.

"Continuous Bath Temperature Measurements in Al Electrolysis Cells" (Testing & Analysis), Qiu Z., Li J., Cui X., K. Grjotheim, H. Kvande, and H.A. Øye, August 1994, pp. 28-30.

"Copper-Nickel Superalloys as Inert Alloy Anodes for Aluminum Electrolysis" (Research Summary), Z. Shi, J. Xu, Z. Qiu, B. Gao, and Z. Wang, November 2003, pp. 63-65.

"Corrosion in Potlining Refractories: Effect of Cathode Material Interpreted Using a Unified Approach" (Research Summary), R. Pelletier and C. Allaire, November 2003, pp. 58-62.

"The Corrosion of Potlining Refractories: A Unified Approach" Overview, R. Pelletier, C. Allaire, O.-J. Siljan, and A. Tabereaux, August 2001, pp. 18-22.

"The Corrosion of Refractories by Molten Aluminum" (Research Summary), S. Afshar and C. Allaire, May 1996, pp. 23-27.

"The Corrosion of Refractory Aggregates by Molten Aluminum" (Research Summary), S. Afshar and C. Allaire, May 2000, pp. 43-46.

"Crust and Alumina Powder Dissolution in Aluminum Smelting Electrolytes" (Research Summary), B.J. Welch and G.I. Kuschel, May 2007, pp. 50-54.

"Defining and Verifying the "Correlation Line" in Aluminum Electrolysis" (Research Summary), S. Kolas, May 2007, pp. 55-60.

"Degassing Aluminum Using Static Fine-Pore Refractory Diffusers" (Innovations in Aluminum, Part II), D.A. Larsen, August 1997, pp. 27, 28, 67.

"The Design of a New Anode Technology for the Aluminum Industry" (Featured Overview), U. Mannweiler and F. Keller, February 1994, pp. 15-21.

"Designing DRA Composites for High Creep Strength" (Overview), R.S. Mishra, November 1999, pp. 65–68.

"Designing Furnaces for the Primary Aluminum Industry" (Design), C. Schmitz, February 1996, pp. 18-20, 22, 23.

"Determining Silica Solubility in Bayer Process Liquor" (Research Summary), M. Jamialahmadi and H. Müller-Steinhagen, November 1998, pp. 44-49.

"Developing an Integrated Information System in a Modern Aluminum Smelter" (Overview), Ph. Urbin, May 1994, pp. 14-18.

"The Development of 5XXX Aluminum Alloys for RCS Applications" (Overview), J.K. McBride, R.E. Sanders, Jr., and H.G. Reavis, June 1996, pp. 18-21.

"The Development of Aluminum Reduction Cell Process Control" (Overview), G.P. Bearne, May 1999, pp. 16–22.

"The Development of a Fluidized Bed Process for the Heat Treatment of Aluminum Alloys" (Industrial Insight), J. Keist, April 2005, pp. 34-39.

"Developments in the Processing and Properties of Particulate Al-Si Composites" (Overview), J.U. Ejiofor and R.G. Reddy, November 1997, pp. 31-37.

"Developments in the Packaging of Aluminum Alloys" (Commentary), J.G. Morris, June 1998, p. 17.

"Discontinuously Reinforced Aluminum: Current Status and Future Direction" (Commentary), B. Maruyama and W.H. Hunt, Jr., November 1999, pp. 59–61.

"Discussing the Issues in Carbon Anode Technology" (Forum Roundtable), July 1990, pp. 52-55.

"DOE Follows Roadmap to Al Technologies of the Future" (Government and Policy), J. Altdorfer, November 2000, pp. 19-25.

"DOE Roadmap toward Innovations in the Aluminum Industry" (Government), J.J. Robinson, May 1998, p. 33.

"Drawn Arc Aluminum Stud Welding for Automotive Applications" (Research Summary), S. Ramasamy, August 2002, pp. 44-46.

"Dross Treatment in a Rotary Arc Furnace with Graphite Electrodes" (Overview), M.G. Drouet, M. Handfield, J. Meunier, and C.B. Laflamme, May 1994, pp. 26, 27.

"Dry Cleaning Aluminum Cell Gases from Söderberg Cells" (Research Summary), M.A. Doheim, H.M. Shafey, M.S. Ahmed, and A.A. Abdellatif, February 2000, pp. 38-40.

"The Economics of Inert Anodes and Wettable Cathodes for Aluminum Reduction Cells" (Overview), Jeff Keniry, May 2001, pp. 43-47.

"The Effect of Hot Isostatic Pressing on Cast Aluminum" (Research Summary), C.S.C. Lei, W.E. Frazier, and E.W. Lee, November 1997, pp. 38, 39.

"The Effect of Magnesium on the Antimony Modification of Al-Si" (Research Summary), B. Xiufang, C. Junhua, L. Xiangfa, Y. Xiujuan, and R. Furong, February 1997, pp. 35, 36.

"The Effect of Preaging on the Delayed Aging of Al-7Si-0.3Mg" (Research Summary), S. Murali, Y. Arunkumar, P.V.J. Chetty, K.S. Raman, and K.S.S. Murthy, February 1997, pp. 29, 30, 33.

"The Effect of Processing Parameters on the Fatigue Properties of D357 Investment Castings" (Research Summary), S. Kennerknecht, X. Dumant, R. Tombari, and P. Van Biljon, November 1997, pp. 22-28.

"The Effect of Retrogression and Reaging on the Properties of the 7249 Aluminum Alloys" (Research Summary), O.S. Es-Said, W.E. Frazier, and E.W. Lee, January 2003, pp. 45-48.

"The Effects of Fumed Silica and Barite on the Aluminum Resistance of Alumina Castables" (Research Summary), S. Afshar, C. Gaubert, and C. Allaire, November 2003, pp. 66-69.

"The Effects of Packaging and Recycling Regulations on the Aluminum Industry" (Government Affairs), M.B. Meyer, December 1992, pp. 26, 27.

"The Effects of Purge Gases on the Hydrogen Content and Mechanical Properties of Spray-Degassed Al`" (Research Summary), R. Wu, M. Zhang, D. Shu, J. Wang, and B. Sun, May 2007, pp. 62-64.

"Effects of Sodium and Bismuth in Aluminum-Magnesium Alloys" (Research Summary), D.E.J. Talbot and D.A. Granger, February 1995, pp. 44-46.

"Effective Safety Training Programs for Aluminum Cast Shops" (Education), J. Martin Ekenes, November 2001, pp. 14-15.

"An Electroanalytical Sensor for Monitoring Alumina Concentration in Cryolite-Alumina Baths" (Innovations in Aluminum, Part II), J.E. Oxley and R.J. Smialek, August 1997, pp. 22, 23, 68.

"Electrochemical Magnesium Sensors for Use in Aluminum Processing" (Overview), J.W. Fergus, November 1995, pp. 36-40.

"The Electrochemistry of Intermetallic Particles and Localized Corrosion in Al Alloys" (Overview), R.G.Buchheit, R.K. Boger, M.C. Carroll, R.M. Lears, C. Paglia, and J.L. Searles, July 2001, pp. 29-33.

"The Electromagnetic Filtration of Molten Aluminum Using an Induced-Current Separator" (Research Summary), N. El-Kaddah, A.D. Patel, and T.T. Natarajan, May 1995, pp. 46-49.

"Electromigration and the Electroplastic Effect in Aluminum SiC MMCs" (Research Summary), N.G. Dariavach and J.A. Rice, May 2000, pp. 40-42.

"Employing a New Bath- and Liquidus-Temperature Sensor for Molten Salts" (Applied Technology), P. Verstreken, November 1997, pp. 43-46.

"The Energy Crisis and the Aluminum Industry: Can We Learn from History?" (Historical Insight), George Binczewski, February 2002, pp. 23-26, 29.

"Energy Implications of the Changing World of Aluminum Metal Supply" (Overview), S.K. Das, W.J. Long III, H.W. Hayden, J.A.S. Green, and W.H. Hunt, Jr., August 2004, pp. 14-17.

"Engineering Wear-Resistant Surfaces in Automotive Aluminum" (Overview), V. Kevorkijan, February 2003, pp. 32-34.

"The Environmental Impact of Steel and Aluminum Body-in-Whites" (Overview), H.N. Han, February 1996, pp. 33-38.

"Environmentally Assisted Crack Growth Rates of High-Strength Aluminum Alloys" (Research Summary), B.J. Connolly, K.L. Deffenbaugh, M.G. Koul, and A.L. Moran, January 2003, pp. 49-52.

"Eutectic Solidification and its Role in Casting Porosity Formation" (Overview), L. Lu, K. Nogita, S.D. McDonald, and A.K. Dahlel, November 2004, pp. 52-58.

"Evaluating the Aluminum Content of Pressed Dross" Research Summary), V. Kevorkijan, February 2002, pp. 34-36.

"Evaluating a New Material for Hall-Héroult Cell Cathodes" (Innovations in Aluminum, Part II), T. Mroz, August 1997, pp. 24, 25, 71.

"Evaluating Ceramic-Foam and Bonded-Particle Cartridge Filtration Systems" (Research Summary), N.J. Keegan, W. Schneider, H.P. Krug, J. Moritz, M. Stoltz, and V. Dopp, August 1996, pp. 28-30.

"Evaluating the Performance of Can-Body Stock Using the Drawbead Simulator" (Research Summary), J.V. Reid and R.G. Kamat, June 1996, pp. 26-28.

"Events and Trends in Metal and Mineral Commodities" (1995 Review of Extraction & Processing), M.C. Munson, April 1995, pp. 54-58.

"Events and Trends in Metal and Mineral Commodities" (1996 Review of Extraction & Processing), T.M. Beazley, April 1996, pp. 45-49.

"Events and Trends in Metal and Minerals Commodities" (Overview), T.M. Beazley, April 1998, pp. 39-42.

"The Evolution of Technology for Light Metals over the Last 50 Years: Al, Mg, and Li" (Overview), J.W. Evans, February 2007, pp. 30-38.

"Extracting Aluminum from Dross Tailings" (Research Summary), A.M. Amer, November 2002, pp. 72-75.

"Faceted Solidification Morphologies in Low-Growth-Rate Al-Si Eutectics" (Research Summary), R.E. Napolitano, H. Meco, and C. Jung, April 2004, pp. 16-21.

"The Finite-Element Deformation Modeling of Superplastic Al-8090" (Research Summary), N.M. Hassan, M.Y. Younan, and H.G. Salem, October 2003, pp. 38-42.

"The Finite-Element Modeling of Aluminum Holding Furnaces" (Research Summary), S.M.H. Darwish, November 1991, pp. 36-38.

"Flow Localization and Plastic Instability during the Tensile Deformation of Al Alloy Sheet" (Research Summary), M. Aghaie-Khafri and R. Mahmudi, November 1998, pp. 50-52.

"Forecasting Trends in Al Manufacturing and Marketing" (Industrial Insight), T.M. Beazley, November 1995, pp. 26, 27.

"Forming and Bonding Techniques for High-Strength Aluminum Alloys" (Overview), H.E. Friedrich, February 1995, pp. 33-35.

"Forming Nanostructured Hypereutectic Aluminum via High-Velocity Oxyfuel Spray Deposition" (Research Summary), T. Laha, A. Agarwal, and T. McKechnie, January 2004, pp. 54-56.

"The Fracture Toughness and Fatigue Behavior of DRA" (Research Summary), A.B. Pandey and N. Chawla, November 1999, pp. 69–72.

"Future Materials Requirements for the High-Energy-Intensity Production of Aluminum" (Overview), B.J. Welch, M.M. Hyland, and B.J. Jones, February 2001, pp. 13-18.

"Gas Reactivity Testing of Raw Materials and Anodes" (Overview), S.M. Hume, R.C. Perruchoud, and W.K. Fischer, February 1994, pp. 27-31.

"The Global Aluminum Industry: Policy and Market Issues" (Economics), A. Born, August 1996, pp. 22, 23.

"The Global Light Metals Sector Outlook: A Primary Aluminum Perspective" (Industrial Insight), W.R. Hale, November 2000, pp. 26-30.

"Global Warming and the Primary Metals Industry" (Overview), D. Forrest and J. Szekely, December 1991, pp. 23-30.

"Good Morale: The Key to Outstanding Operation Results" (Industrial Insight), O. Knaisch, May 1996, pp. 19-21.

"Grain Refinement in Aluminum Alloys by Means of Electromagnetic Vibrations Including Cavitation Phenomena" (JOM-e: Overview), C. Vivés, February 1998.

"The Grain Refinement of 6063 Aluminum Using Al-5Ti-1B and Al-3Ti-0.15C Grain Refiners" (Research Summary), P. Moldovan and G. Popescu, November 2004, pp. 59-61.

"Growing Faith in Managerial Leadership: A Prospect for Change in Australian Workplaces" (Industrial Insight), C.G. Thorne, May 1997, pp. 13, 14.

"Health and Safety Precautions in the Relining of Aluminum Electrolysis Cells" (Industrial Insight), R.P. Pawlek, May 1994, pp. 21-24.

"Heat Treating Aluminum with Fluid-Bed Quenching" (Overview), M. Glasser, May 1998, pp. 48-50.

"The Heredity of Al-Si-Mg-Mn Before and After Remelting" (Research Summary), L. Xiangfa, B. Xiufang, Q. Xiaogang, and M. Jiaji, November 1997, pp. 40, 41.

"A High-Capacity Melt Furnace for Reduced Energy Consumption and Enhanced Performance" (Overview), M. Fu, K. Staples, and V. Sarvepalli, May 1998, pp. 42-44.

"High-Strength, Corrosion-Resistant Aerospace Aluminum Alloys" (Commentary), W.E. Frazier, January 2003, p. 44.

"High-Velocity Metal Forming—An Old Technology Addresses New Problems" (Overview), G.S. Daehn, M. Altynova, V.S. Balanethiram, G. Fenton, M. Padmanabhan, A. Tamhane, and E. Winnard, July 1995, pp. 42-45.

"The Hot Deformation of Aluminum Alloys" (Commentary), T.R. Bieler, L.A. Lalli, and S.R. MacEwen, June 1998, pp. 14-15.

"How the Middle East Crisis May Affect the Aluminum Industry" (Economics), R.G. Adams, November 1990, p. 45.

"The Hyper-Pressure Pulse Bonding of Aluminum" (Overview), J. Kollé, August 1998, pp. 29-31.

"Implementing the ISO 9002 Quality System at an Aluminum Cast House" (Overview), T. McParland and J. Prebble, November 1992, pp. 15-19.

"The In-Line Inspection of Carbon Anodes for Aluminum Production" (Testing & Analysis), F. Emad, P. Haldemann, A. Nispel, and L. Logan, February 1996, pp. 24-27.

"The Increasing Use of Aluminum in Automotive Applications" (Overview), K.R. Brown, M.S. Venie, and R.A. Woods, July 1995, pp. 20-23.

"Inert Anodes and Other New Al Technologies—The Benefits, Challenges and Impact on Present Technology" (Roundtable), Les Edwards, Nolan Richards, and Halvor Kvande, May 2001, pp. 48-50.

"Inert Anodes and Other Technology Changes in the Aluminum Industry—The Benefits, Challenges, and Impact on Present Technology" (Commentary), Les Edwards and Halvor Kvande, May 2001, p. 28.

"Inert Anodes for Al Smelters: Energy Balances and Environmental Impact" (Overview), Halvor Kvande and Warren Haupin, May 2001, pp. 29-33.

"Inert Anodes for the Hall-Héroult Cell: The Ultimate Materials Challenge" (Overview), Donald Sadoway, May 2001, pp. 34-35.

"The Influence of Additives on Hall-Héroult Bath Properties" (Tutorial), W. Haupin, November 1991, pp. 28, 29, 32-34.

"The Influence of Coke Source on Anode Performance" (Research Summary), C. Jonville, J.C. Thomas, and C. Dreyer, August 1995, pp. 23, 24.

"The Influence of the Crystallographic Texture of the Biaxial Stretchability of AA 5182 Sheet" (Research Summary), B. Ren, J.G. Morris, and A.J. Beaudoin, June 1996, pp. 22-25.

"The Influence of Electromagnetic Stirring on Al-Ti-B Master Alloys" (Research Summary), L. Xiangfa, Z. Zuogui, G. Zhen, and B. Xiufang, May 2000, pp. 47-48.

"The Influence of Heating Element Temperature on Productivity" (Research Summary), A.K. Singh, S. Saptharishi, B. Basu, and J.A. Sekhar, November 2002, pp. 76-80.

"The Influence of Hydrogen on the Stress-Corrosion Cracking of Low-Strength Al-Mg Alloys" (Research Summary), R.H. Jones, February 2003, pp. 42-46.

"The Influence of Severe Plastic Deformation on the Mechanical Properties ofAA6111" (Research Summary), K. Rhee, R. Lapovok and P.F. Thomson, May 2005, pp. 62-66.

"Inoculating an Al-Si Alloy with Phosphorus, Rare Earths, and Sulfur" (Research Summary), Zhao H.X. and Cai J., November 1994, p. 42.

"The Interaction of Design and Operation for Optimized Aluminum Reduction" (Applied Technology), A.R. Phillips, November 1990, pp. 31-34.

"Interfacial Processes and the Performance of Cathode Linings in Aluminum Smelters" (Research Summary), B.J. James, B.J. Welch, M.M. Hyland, J.B. Metson, and C.D. Morrison, February 1995, pp. 22-25.

"Integrating Coal Combustion and Red Mud Sintering at an Alumina Refinery" (Overview), V.L. Rayzman and I.K. Filipovich, August 1999, pp. 16–18.

"International Cooperation and High-Performance Reduction in Siberia" (Industrial Insight), V.A. Kryukovski, G.A. Sirasutdinov, J. Klein, and G. Peychal-Heiling, February 1994, pp. 23-25. (Correction printed in June 1994, p. 63.)

"Investigating Carbon/TiB₂ Materials for Aluminum Reduction Cathodes" (Research Summary), J. Xue and H.A. Øye, November 1992, pp. 28-30, 33, 34.

"Irreversible HF Adsorption in the Dry-Scrubbing Process" (Overview), A.R. Gillespie, M.M. Hyland, and J.B. Metson, May 1999, pp. 30–32.

"Issues in the Melting and Reclamation of Aluminum Scrap" (Overview), R.D. Peterson, February 1995, pp. 27-29.

"Joining Aluminum Materials Using Ultrasonic Impactors" (Innovations in Aluminum, Part I), G. Freitas and M. Dubberly, May 1997, pp. 31, 32.

"Key Improvements to Hall-Héroult Since the End of World War II" (Overview), K. Grjotheim, H. Kvande, and Q. Zhuxian, November 1995, pp. 32-35.

" The Life-Cycle Impacts of Aluminum Body-in-White Automotive Material" (Research Summary), S. Das, August 2000, pp. 41-44.

"Lifetime Costing of the Body-in-White: Steel vs. Aluminum" (Overview), H.N. Han and J.P. Clark, May 1995, pp. 22-28.

"Light Metals 1990: Advances in Aluminum Production" (Conference Review), S.K. Das, July 1990, pp. 30-32.

"Light Metals 1991: Advances in Aluminum Production" (Conference Review), S.K. Das, M.V. Chaubal, S.C. Manaktala, K.J. Farmer, and N.B. Bryson, November 1991, pp. 47-50.

"Light Metals 1992: Advances in Aluminum Production" (Conference Review), S.K. Das, J. Laurier, R.D. Zabreznik, M. Reverdy, and S.A. Levy, September 1992, pp. 41-45.

"Light Metals 1993: Advances in Aluminum Production" (Conference Review), S.K. Das, M. Chaubal, R. Huglen, R.T. Tonti, D.N. McLeod, D. Stewart, and R. Orth, August 1993, pp. 15-20.

"Light Metals 1994: Advances in Aluminum Production" (Conference Review), M.V. Chaubal, J.L. Anjier, B.J. Welch, R.D. Peterson, M.A. Smith, J.H. van Linden, and G.J. Kipouros, August 1994, pp. 14-23.

"Light Metals 1995: Advances in Aluminum Production" (Conference Review), M.V. Chaubal, R.A. Cheatham, B.J. Sadler, and R.G. Reddy, November 1995, pp. 43-46.

"Light Metals 1996: Advances in Aluminum Production" (Conference Review), M. Chaubal, C. Hendriks, F. Stevens, and L. Castonguay, November 1996, pp. 21-24.

"Limited Casting Resources Meet World Class Ingenuity" (Featured Overview), G.J. Binczewski, November 1996, pp. 26-28.

"The Localized Corrosion of Al 6XXX Aloys" (Research Summary), B.A. Shaw, M.M. McCosby, A.M. Abdullah, and H.W. Pickering, July 2001, pp. 42-46.

"The Localized Corrosion of Al at Engineered Cu Islands" (Overview), N. Missert, J.C. Barbour, R.G. Copeland, and J.E. Mikkalson, July 2001, pp. 34-36.

"The Long-Term Significance of the CIS Aluminum Industry" (Opinion), R.G. Adams, August 1993, pp. 21, 22.

"Looking Ahead to Alumitech" (Conference Preview), G.J. Gausman, August 1994, p. 12.

"A Macrocomposite Al Brake Rotor for Reduced Weight and Improved Performance" (Overview), S.X. Huang and K. Paxton, August 1998, pp. 26-28.

"Managing Aluminum Reduction Technology: Extracting the Most from Hall-Heroult" (Featured Overview), H.A. Oye and R. Huglen, November 1990, pp. 23-28.

"Managing Greenhouse Gas Emission in the Indian Aluminum Industry" (Overview), H. Mahadevan, November 2001, pp. 34-36.

"Matching Alumina Properties with Reduction Requirements" (Overview), A.R. Kjar, August 1994, pp. 24-26.

"The Mathematical Modeling of Aluminum Reduction Cells" (Overview), G.V. Arkhipov, February 2006, pp. 54-56.

"Mechanism and Preventive Measures for Die Soldering during Al Casting in a Ferrous Mold" (Research Summary), Sumanth Shankar and Diran Apelian, August 2002, pp. 47-54.

"Megatrends in the Manufacture of Aluminum Cans" (Industrial Insight), S.K. Das and J.J. Robinson, May 1993, pp. 12, 13.

"Melting Standardized Aluminum Scrap: A Mass Balance Model for Europe" (Overview), U.M.J. Boin and M. Bertram, August 2005, pp. 26-33.

"Metal Forming at the Center of Excellence for the Synthesis and Processing of Advanced Materials" (Overview), D.A. Hughes, M.E. Kassner, M.G. Stout, and J.S. Vetrano, June 1998, pp. 16-21.

"Metals Production, Energy, and the Environment, Part I: Energy Consumption" (Featured Overview), K.S. Yoshiki-Gravelsins, J.M. Toguri and R.T.C. Choo, May 1993, pp. 15-20.

"Metals Production, Energy, and the Environment, Part II: Environmental Impact" (Featured Overview), K.S. Yoshiki-Gravelsins, J.M. Toguri, and R.T.C. Choo, August 1993, pp. 23-29.

"Microalloyed Aluminum for Cryogenic Conductors" (Research Summary), L.C. McDonald, K.T. Hartwig, and A. Takahashi, February 1995, pp. 41-43.

"Microstructure-Property Relationships in O-Temper Foil Alloys" (Research Summary), G.J. Mahon and G.J. Marshall, June 1996, pp. 39-42.

"The Mineralogical Characterization of Dry-Powder Barriers in Al Reduction Cells" (Research Summary), A.M. Hagni, February 1998, pp. 24-28.

"The Mineralogy of Bauxite for Producing Smelter-Grade Alumina" (Overview), M. Authier-Martin, G. Forté, S. Ostap, and J. See, December 2001, pp. 36-40.

"Modeling Composition/Processing/Property Relationships in a Cold-Rolled Aluminum Alloy" (Research Summary), I.J. Polmear, J.E. Tibballs, and B. Rinderer, November 1999, pp. 51–53.

"Modeling the Recrystallization Textures of Aluminum Alloys after Hot Deformation" (Overview), O. Engler and H.E. Vatne, June 1998, pp. 23-27.

"Modern Liquid Carbon Pitch Systems for Anode Production" (Forum Feature), A. Foster and D. Catena, November 1992, pp. 65-67.

"Modification of Al-Si Alloys: Microstructure, Thermal Analysis, and Mechanisms" (Overview), S.-Z. Lu and A. Hellawell, February 1995, pp. 38-40.

"Modifying Alumina Red Mud to Support a Revegetation Cover" (Research Summary), A. Xenidis, A.D. Harokopou, E. Mylona, and G. Brofas, February 2005, pp. 42-46.

"Molten Metal Processing of Advanced Cast Aluminum Alloys" (Overview), S. Shivkumar, L. Wang, and D. Apelian, January 1991, pp. 26-32.

"The Multivariable Model-Based Control of the Non-Alumina Electrolyte Variables in Aluminum Smelting Cells" (Overview), F.J. Stevens McFadden, B.J. Welch, and P.C. Austin, February 2006, pp. 42-47.

"A Networked Research Program for Aluminum Production and Transformation" (Overview), R.T. Bui, A. Charette, M. Fafard, F. Paray, G. Soucy, F. Ajersch, J. Masounave, and F. Chiesa, May 2003, pp. 43-47.

"New Electrolytes for Aluminum Production: Ionic Liquids" (Overview), M. Zhang, V. Kamavaram, and R.G. Reddy, November 2003, pp. 54-57.

"New Trends in Characterizing Industrial Bayer Aluminas" (Research Summary), M.P. Garcia Coque, M.A. Llavona, J.M. Ayala, L.F. Verdeja and J.P. Sancho, November 1990, pp. 20, 21.

"Next Generation Vertical Electrode Cells" (Overview), Craig Brown, May 2001, pp. 39-42.

"Novel Image Analysis to Determine the Si Modification for Hypoeutectic and Hypereutectic Al-Si Alloys" (Research Summary), F.C. Robles Hernández and J.H. Sokolowski, November 2005, pp. 48-52.

"Numerically Modeling Oxide Entrainment in the Filling of Castings: The Effect of the Webber Number" (Research Summary), R. Cuesta, A. Delgado, A. Maroto, and D. Mozo, November 2006, pp. 62-65.

"An On-Line Ultrasonic Cleanliness Analyzer for Molten Light Metals" (Research Summary), Y. Ono, J.-F. Moisan, Y. Zhang, C.-K. Jen, and C.-Y. Su, February 2004, pp. 59-64.

"An Optical Technique to Measure Distortion in Heat-Treated Parts In-Situ" (Research Summary), F. Sciammarella and P. Nash, May 2005, pp. 67-70.

" An Overview of the Aluminum Industry" (Overview), R.B. Evans, August 2000.

" A Perspective on Aluminum Metal Treatment" (Overview), C.E. Eckert, August 2000.

"Phase Transformations in Ternary Monotectic Aluminum Alloys" (Overview), J. Gröbner and R. Schmid-Fetzer, September 2005, pp. 19-23.

"Planar and Variable-Diameter Jets for Uniform Droplet Sprays" (Overview), T.W. Lee and A.A. Tseng, August 1998, pp. 24-25.

"The Point of a Monument: A History of the Aluminum Cap of the Washington Monument" (Featured Overview), G.J. Binczewski, November 1995, pp. 20-25.

"The Possible Reduction of Alumina to Aluminum Using Hydrogen" (Research Summary), O. Braaten, A. Kjekshus, and H. Kvande, February 2000, pp. 47-53.

"Prebake Cell Technology: A Global Review" (Overview), A. Tabereaux, February 2000, pp. 22-28.

"Preparing High- and Low-Aspect Ratio AlB₂ Flakes from Borax or Boron Oxide" (Research Summary), A.C. Hall and J. Economy, February, pp. 42-44.

"Preventing Melt-Water Explosions" (Overview), R.P. Taleyarkan, February 1998, pp. 35-38.

"Previewing Aluminum Supply and Demand for 1992" (Opinion), R.G. Holder, November 1991, p. 12.

"Previewing the Next 10 Years in the Aluminum Industry" (Forum Roundtable), May 1991, pp. 58-61.

"The Primary Aluminum Industry in the Commonwealth of Independent States--Part I" (Overview), S.C. Manaktala, November 1992, pp. 38-40.

"The Primary Aluminum Industry in the Commonwealth of Independent States--Part II" (Overview), S.C. Manaktala, February 1993, pp. 18-21.

"The Primary Aluminum Industry in the Commonwealth of Independent States--Part III" (Overview), S.C. Manaktala, May 1993, pp. 22-24.

"The Problem of Sulfur Content in Calcined Petroleum Coke" (Overview), M.F. Vogt, J.H. Waller and R.D. Zabreznik, July 1990, pp. 33-35.

"Processing Commercial Aluminum Alloys for High Strain-Rate Superplascity" (Overview), Rajiv S. Mishra, March 2001, pp. 23-26.

"The Processing, Properties, and Applications of High-Strain-Rate SuperplasticMaterials" (Overview), M. Mabuchi and K. Higashi, June 1998, pp. 34-39.

"Producing Thin Strips by Twin-Roll Casting--Part I: Process Aspects and Quality Issues" (Overview), B.Q. Li, May 1995, pp. 29-33.

"Producing Thin Strips by Twin-Roll Casting--Part II: Process Modeling and Development" (Overview), B.Q. Li, August 1995, pp. 13-17.

"The Production of High-Purity Aluminum in Japan" (Overview), M. Kondo, H. Maeda and M. Mizuguchi, November 1990, pp. 36, 37.

"The Production of Ultrahigh-Purity Copper for Advanced Applications" (Overview), M. Kato, December 1995, pp. 44-46.

"The Properties and Application of Scandium-Reinforced Aluminum" (Overview), Z. Ahmad, February 2003, pp. 35-39.

"The Properties and Uses of Fluxes in Molten Aluminum Processing" (Overview), T.A. Utigard, K. Friesen, R.R. Roy, J. Lim, A. Silny, and C. Dupuis, November 1998, pp. 38-43.

"Recent Developments in Carbon Baking Technology" (Overview), J. Hurlen and T. Naterstad, November 1991, pp. 20, 21, 24, 25.

"Recent Developments in the Treatment of Spent Potlining" (Overview), R.P. Pawlek, November 1993, pp. 48-52.

"Recent Trends in Binder Pitches for Reduction Anodes" (Overview), N.R. Turner, November 1993, pp. 39-42.

"Recovering Aluminum via Plasma Processing" (Research Summary), R.N. Szente, R.A. Schroeter, M.G. Garcia, and O.W. Bender, November 1997, pp. 52-55.

"Recovering Gallium from Residual Bayer Process Liquor" (Research Summary), M.E. Afonso de Magalhaes and M. Tubino, June 1991, pp. 37-39.

"Recovering Metals from Red Mud Generated during Alumina Production" (Overview), L. Piga, F. Pochetti, and L. Stoppa, November 1993, pp. 54-59.

"The Recycle of Wrought Aluminum Alloys in Europe" (Overview), V. Kevorkijan, February 2002, pp. 38-41.

"Recycling Al-Si Alloys from Spacecraft Accessories" (1995 Fall Extractive Meeting Preview: Secondary Aluminum), P.C. Olaru, October 1995, p. 16.

"Recycling Aluminum Foil from Post-Consumer Beverage Cartons" (1995 Fall Extractive Meeting Preview: Aluminum Consumer Packaging), P. Charlier and G. Sjöberg, October 1995, pp. 12, 13.

"Recycling Aluminum Packaging Materials" (Opinion), J.W. Plumb, December 1992, p. 28.

"Recycling Chromium-Aluminum Wastes from Aluminum Finishing Operations" (Applied Technology), R. Crnojevich, E.I. Wiewiorowski, L.R. Tinnin and A.B. Case, October 1990, pp. 42-45.

"Recycling Salt-Cake Slag Using a Resin-Based Option" (Research Summary), A.C. Sheth, K.D. Parks, and S. Parthasarathy, August 1996, pp. 32-37.

"Reexamining the Pitch/Coke Wetting and Penetration Test" (Overview), Jinan Cao, Alan N. Buckley, and Alan Tomsett, February 2002, pp. 30-33.

"Regulations and Practices for the Disposal of Spent Potliner by the Aluminum Industry" (Forum Environment), S.J. Spiegel and T.K. Pelis, November 1990, pp. 70-73.

"Relating the Debye Temperature and Structural Stability of Rapidly Solidified Al Alloys" (Research Summary), R. Dasgupta and S.K. Bose, March 1995, pp. 20-22.

"Removing Al and Regenerating Caustic Soda from the Spent Washing Liquor of Al Etching" (Research Summary), M.A. Barakat, S.M. El-Sheikh, and F.E. Farghly, August 2005, pp. 34-38.

"Removing Impurities from Secondary Alumina" (Research Summary), P. Lossius and H.A. Øye, November 1991, pp. 41-45.

"Replacing Al Powder with Al Slag or Recycled Foil in Cellular Concrete" (Innovations in Aluminum, Part II), J.Y. Hwang and X.M. Song, August 1997, pp. 29, 30.

"Reprocessing Potliners from Hall-Héroult Cells" (Innovations in Aluminum, Part II), J.R. Divine, August 1997, pp. 26, 68.

"A Response to 'The Environmental Impact of Steel and Aluminum Body-in-Whites'," K.J. Martchek, E.S. Fisher, and A.R. Wasson, February 1996, pp. 40, 41.

"Retrofitting Older Aluminum Reduction Cell Lines--A Way to Extend Productive Life" (Overview), H. Kvande, February 1997, pp. 21-26.

"Reviewing Advances in Cathode Refractory Materials" (Overview), A.T. Tabereaux, November 1992, pp. 20, 21, 25, 26.

"The Rheological Properties of Solidifying Aluminum Foundry Alloys" (Overview), A.K. Dahle and L. Arnberg, March 1998, 34-37.

"The Role of Aluminum in Automotive Weight Reduction--Part I" (Overview), Y. Kurihara, November 1993, pp. 32, 33.

"The Role of Aluminum in Automotive Weight Reduction--Part II" (Overview), Y. Kurihara, February 1994, pp. 33-35.

"The Role of Aluminum in Automotive Weight Reduction--Part III" (Overview), Y. Kurihara, May 1994, pp. 12, 13.

"The Role of Technology in the Global Primary Aluminum Industry Today and in the Future" (Roundtable), J.W. Evans and H. Kvande, August 2005, pp. 21-25.

"The Russian Al Industry's Difficult Transition to a Market Economy" (Overview), S.C. Manaktala, May 1995, pp. 14-18.

"The Russian Aluminum Industry: Strategies and Opportunities" (Conference Review), W.S. Peterson, January 1993, pp. 15, 16.

"The Russian Aluminum Industry: Trends and Reflections of the Global Market" (Overview), I. Prokopov, February 2005, pp. 32-34.

"A Salt-Free Treatment of Aluminum Dross Using Plasma Heating" (Forum Environment), S. Lavoie and G. Dube, February 1991, pp. 54, 55.

"Separating Aluminum from Shredded Automotive Scrap" (Applied Technology), C.-H. Lee, T.-C. Cheau, and S.-T. Chen, May 1994, pp. 40-42.

"Sheet Metal Forming: A Review" (Tutorial), W.F. Hosford and J.L. Duncan, November 1999, pp. 39–44.

"Simulating the Deformation and Recrystallization of Aluminum Bicrystals" (Research Summary), B. Radhakrishnan and G. Sarma, April 2004, pp. 55-62.

"Simulating Weld-Fusion Boundary Microstructures in Aluminum Alloys" (Research Summary), A.D. Kostrivas and J.C. Lippold, February 2004, pp. 65-72.

"The Single-Step Preheating of AA3104 Can-Body Stock Ingots" (Research Summary), S.L. Palmer and Z. Li, June 1996, pp. 30-33.

"Sodium Aluminate from Alumina-Bearing Intermediates and Wastes" (Overview), V. Rayzman, I. Filipovich, L. Nisse, and Y. Vlasenko, November 1998, pp. 32-37.

"Solid-State Spray Forming of Aluminum Near-Net Shapes" (Innovations in Aluminum, Part II), H. Gabel and R. Tapphorn, August 1997, pp. 31-33.

"Solidification Studies of Automotive Heat Exchanger Materials" (Overview), T. Carlberg, M. Jaradeh, and H. Kamgou Kamga, November 2006, pp. 56-61.

"Some Physical Model Studies of Gas-Induced Flows in Aluminum Cells" (Featured Overview), J.J.J. Chen, November 1994, pp. 15, 16, 18-20.

"Sonochemical Technology for Processing Bauxite" (Overview), S.F. McGrath and L.C. Farrar, May 1998, pp. 34-37.

"The Stability of Refractrory Oxides in Sodium-Rich Enviornments" (Overview), C. Schøning and T. Grande, February 2006, pp. 58-61.

"State-of-the-Art Alumino-Silicate Refractories for Al Electrolysis Cells" (Overview), Ole-Jacob Siljan, Christian SchØning, and Tor Grande, May 2002, pp. 46-54, 63.

"A Steel Response to 'The Environmental Impact of Steel and Aluminum Body-in-Whites'," R. Dworek, July 1998, p. 31.

"A Strategic View of Calcined Coke for Aluminum Smelting" (Economics), M.F. Vogt, November 1993, p. 34.

"Substructural Influence in the Hot Rolling of Al Alloys" (Overview), H.J. McQueen, June 1998, pp. 28-33.

"The Sulfuric Acid Leaching of Bayer Electrofilter Fines: A Practical Kinetical Approach" (Research Summary), J.P. Sancho Martínez, E.J. Ayala, M.P. García Coque, P.B. Fernández, and A.D. Costales, August 2006, pp. 58-62.

"Surface Engineering of Aluminum Alloys for Automotive Engine Applications" (Research Summary), S. Nayak and N.B. Dahotre, January 2004, pp. 46-48.

"Synthesizing Aluminum Alloys by Double Mechanical Alloying" (Research Summary), L. Froyen, L. Delaey, X.P. Niu, P. Le Brun, and C. Peytour, March 1995, pp. 16-19.

"Synthesizing Submicrometer and Nanoscale Particles via Self-Assembled Molecular Membranes" (Overview), G.-M. Chow, M.A. Markowitz, and A. Singh, November 1993, pp. 62-65.

"Technology Innovation in Aluminum Products" (Overview), Robert E. Sanders, Jr., February 2001, pp. 21-25.

"A Technology Roadmap for the U.S. Aluminum Industry" (Innovations in Aluminum, Part II), H.S. Kenchington, J.L. Eisenhauer, and J.A.S. Green, August 1997, pp. 18-21.

"The Thermal Spraying of Aluminum as an Adhesive-Bond Pretreatment" (Innovations in Aluminum, Part I), G.D. Davis, May 1997, pp. 25-27.

"Three-Way Quality Partnerships: The Secret to Long-Term Survival in the Metals Industries" (Commentary), P.G. Campbell and R.D. Zabreznik, November 1990, p. 17.

"TMS Plenary Session: Energy Reduction in the Aluminum Industry" (Conference Review), Maureen Byko, May 2002, pp. 39-40.

"Today's Aluminum Industry: Facing the Economic and Environmental Challenges" (Opinion), D. Morton, November 1992, p. 6.

"Trends and Needs in Can Stock: A Packaging Company's Perspective" (Industrial Insight), W.C. Hoyle and F.R. Setlak, November 1996, pp. 33-36.

"Trends in the Global Aluminum Fabrication Industry" (Overview), S. Das and W. Yin, February 2007, pp. 83-87.

"Tuning Forks for Vibrant Teaching" (Education), T.D. Burleigh and P.A. Fuierer, November 2005, pp. 26-27.

"Ultrafine-Grained Microstructures Evolving During Severe Plastic

"Understanding and Mitigating Heat Exchanger Fouling in Bauxite Refineries" (Research Summary), H. Muller-Steinhagen, M. Jamialahmadi, and B. Robson, November 1994, pp. 36-41.

"Updating a 1950s-Generation Aluminum Smelter" (Industrial Insight), O.S. Chaudhry and R.N. Prasad, November 1992, pp. 9, 12, 13.

"Upgrading Nonferrous Metal Scrap for Recycling Purposes" (Research Summary), G.H. Nijhof and P.C. Rem, August 1999, pp. 20–23. (Note: A correction appears in November 1999, p. 10.)

"U.S. DOE Programs Team to Give a Boost to the Aluminum Industry" (Innovations in Aluminum, Part I), R. Conger and M. Hattrup, May 1997, p. 15.

"The Use of a Dynamic Aluminum Cell Model" (Overview), T.V. Piskazhova and V.C. Mann, February 2006, pp. 48-52.

"The Use of Electromagnetic Casting for Al Alloys and Other Metals" (Overview), J.W. Evans, May 1995, pp. 38-41.

"The Use of Rotating-Impeller Gas Injection in Aluminum Processing" (Overview), C. Leroy and G. Pignault, September 1991, pp. 27-30. (Note: A correction appears in December 1991, p. 48.)

"Using Grain Boundary Mobility to Characterize Aluminum Purity" (Testing & Analysis), D.A. Molodov, U. Czubayko, G. Gottstein, and L.S. Shvindlerman, February 1996, pp. 30, 31.

"Using Intense Plastic Straining for High-Strain-Rate Superplasticity" (Research Summary), T.G. Langdon, M. Furukawa, Z. Horita, and M. Nemoto, June 1998, pp. 41-45.

"Using Numerical Simulation with Rapid Prototyping and Investment Casting" (Research Summary), M. Wu, J. Schädlich-Stubenrauch, I. Wagner, and P.R. Sahm, August 2000, pp. 45-47.

"Using Sonic Cleaning to Improve Dry Scrubber Operation" (Applied Technology), L.A. Fugate, August 1994, pp. 32, 33.

"Virtual Aluminum Castings: An Industrial Application of ICME" (Overview), J. Allison, M. Li, C. Wolverton, and X.-M. Su, November 2006, pp. 28-35.

"Visualizing Gas Evolution on Graphite and Oxygen-Evolving Anodes"(Overview), Laurent Cassayre, Torstein A. Utigard, and Sylvie Bouvet, May 2002, pp. 41-45.

"The Wettability of TiB₂-Based Cathodes in Low-Temperature Slurry-Electrolyte Reduction Cells" (Overview), C.W. Brown, May 1998, pp. 38-40.

"Will Aluminum Prices Turn the Corner in 1992?" (Economics), D.L. Moison, November 1991, pp. 16, 17.

"The World Aluminum Industry: Status and Prospects for 1996" (Economics), B.I. Arlyuk, November 1995, pp. 29, 30.

"The World Still Won’t Beat a Path to Your Door: Transitioning DRA to the Marketplace" (Industrial Insight), W.H. Hunt, Jr., and B. Maruyama, November 1999, pp. 62–64.