"Accurately Determining Eutectic Compositions: The Sn-Ag-Cu Ternary Eutectic" (Research Summary), K.-W. Moon and W.J. Boettinger, April 2004, pp. 22-27.

"Advanced Materials II: Ultrafine-Grained Materials" (Commentary), P.K. Liaw, March 2001, p. 30.

"Advanced Solidification Processing of an Industrial Gas Turbine Engine Component" (Overview), M.L. Clemens, A. Price, and R.S. Bellows, March 2003, pp. 27-31.

"Advances in Melting Technology for High-Temperature Alloys" (Commentary), A.D. Helms and C.M. O'Brien, March 1998, p. 12.

"An Air Melting Technique for Preparing Cu-Cr Alloys" (Research Summary), P.M. Berge, S.T. Kim, E.D. Gibson, and J.D. Verhoeven, July 1998, pp. 42-43.

"Al Alloys: The Influence of Concurrent Precipitation on Recyrstallization Behavior, Kinetics, and Texture" (Overview), J.G. Morris and W.C. Liu, November 2005, pp. 44-47.

"Aluminum Furnaces: Improving Low Cement Castables by Non-Wetting Additives" (Overview), Saied Afshar and Claude Allaire, August 2001, pp. 24-27.

"Aluminum Solidification Processing: Prospective and Retrospective Views of the Industry and the Field" (Overview), D. Apelian, August 2000.

"The Analytical Modeling of Normal Grain Growth" (Overview), C.S. Pande and S.P. Marsh, September 1992, pp. 25-29.

"Analyzing Casting Problems by the On-line Monitoring of Continuous Casting Mold Temperatures" (Overview), PO. Hemy, R. Smylie, and C. Srinivasan, January 2002.

"Analyzing Furnace-Lining Integrity Using Nodal Wear Modeling" (Overview), R. Parra, L.F. Verdeja, M.F. Barbés, C. Goni, and V. Bazán, October 2005, pp. 29-36.

"Analyzing Superplastic Microstructures Using Interactive EBSP Methods" (Testing & Analysis), T.R. McNelley and M.E. McMahon, February 1996, pp. 58-60.

"Analyzing Unidirectional Solidification for a Co-Cr-Mo Biomedical Alloy by FEA" (Research Summary), H. Hooputra, H.M. Tensi, H. Mayr, and L. Michaelsen, March 1996, pp. 30-33.

"Applications for Grain Boundary Engineered Materials" (Overview), G. Palumbo, E.M. Lehockey, and P. Lin, February 1998, pp. 40-43.

"The Application of Defect Maps in the Process Modeling of Single-Crystal Investment Casting" (Overview), J.S. Tu and R.K. Foran, June 1992, pp. 26-28.

"The Application of Orientation Imaging Microscopy" (Overview), T.A. Mason and B.L. Adams, October 1994, pp. 43-45.

"Applications of Texture in Thin Films" (Overview), D.B. Knorr and J.A. Szpunar, September 1994, pp. 42-48.

"Applying MHD Technology to the Continuous Casting of Steel Slab" (Overview), E. Takeuchi, May 1995, pp. 42-45.

"Applying Texture Analysis to Materials Engineering Problems" (Overview), D.B. Knorr, H. Weiland, and J.A. Szpunar, September 1994, pp. 32-36.

"Applying TLP Bonding to the Joining of Structural Intermetallic Compounds" (Overview), W.F. Gale, February 1999, pp. 49–52.

"An Atomistic Study of Solid/Liquid Interfaces in Binary Systems" (Research Summary), M.I. Baskes, April 2004, pp. 45-48.

"Automating a Silver Ingot Casting and Stacking Operation" (Industrial Insight), N. Worswick, April 2003, pp. 55-56.

"The Basics of Modern Semi-Solid Metal Processing" (Overview), F. Czerwinski, June 2006, pp. 17-20.

"Benchmark Testing the Flow and Solidification Modeling of Al Castings" (Overview), B. Sirrell, M. Holliday, and J. Campbell, March 1996, pp. 20-23.

"Calculating Solidification and Transformation in As-Cast CMSX-10" (Applied Technology), G.E. Fuchs and B.A. Boutwell, January 2002, pp. 45-48.

"Capitalizing on Computational Tools in Industrial Alloy Development" (Applied Technology), M.G. Fahrmann and G.D. Smith, January 2002, pp. 42-44.

"Carbon-Containing Single-Crystal Nickel-Based Superalloys: Segregation Behavior and Carbide Formation" (Research Summary), K.A. Al-Jarba and G.E. Fuchs, September 2004, pp. 50-55.

"Cast Aluminum-Matrix Composites for Automotive Applications" (Featured Overview), P. Rohatgi, April 1991, pp. 10-15.

"Casting Al Sheets on a Lab-Scale, Single-Roll, Continuous Sheet Caster" (Research Summary), S.P. Mehrotra, M.R.R.I. Shamsi, and P.N. Bid, August 1995, pp. 18-21.

"Casting Defects in Low-Pressure Die-Cast Aluminum Alloy Wheels" (Overview), B. Zhang, S.L. Cockcroft, D.M. Maijer, J.D. Zhu, and A.B. Phillion, November 2005, pp. 36-43.

"Casting Process Simulation and Visualization: A JOM-e Perspective" (Commentary), Brian G. Thomas, January 2002, pp. 20-21.

"Casting of Ti Prostheses and Implants with the Aid of Numerical Simulation" (Overview), M. Wu, M. Augthun, I. Wagner, and P.R. Sahm, April 2001, pp. 36-38.

"Centrifuge Melt Spinning—Merits and Limitations" (Overview), J. Baram, January 1990, pp. 20-26.

"Ceramic-Metal Interfaces and the Spreading of Reactive Liquids" (Overview), A. Meier, D.A. Javernick, and G.R. Edwards, February 1999, pp. 44-47 (Note: A correction appears in November 1999, p. 10).

"The Chronology of a Microgravity Spaceflight Experiment: IDGE" (Overview), M.E. Glicksman, M.B. Koss, and E.A. Winsa, August 1995, pp. 49-54.

"The Closed-Circuit Degassing of Liquid Aluminum by Argon" (Innovations in Aluminum, Part I), R.A. Rapp, May 1997, pp. 16-19.

"The Closed-Circuit Degassing/Fluxing of Liquid Aluminum Alloys by Nitrogen-Chlorine" (Innovations in Aluminum, Part I), R.A. Rapp, May 1997, pp. 21-23.

"The CMSF Process: The Spray Forming of Clean Metal" (JOM-e: Overview), W.T. Carter, Jr., M.G. Benz, A.K. Basu, R.J. Zabala, B.A. Knudsen, R.M. Forbes Jones, H.E. Lippard, and R.L. Kennedy, April 1999.

"Cold-Crucible Directional Solidification of Refractory Metal-Silicide Eutectics" (Research Summary), K.-M. Chang, B.P. Bewlay, J.A. Sutliff, and M.R. Jackson, June 1992, pp. 59-63.

"The Computer-Aided Analysis of Directional Solidification Processes" (Overview), W. Shyy, March 1996, pp. 24-29.

"Computer-Aided Development of an Investment Casting Process" (Overview), J.S. Tu, D.M. Olinger, and A.M. Hines, October 1993, pp. 29-32.

"Computer-Assisted Riser Design and Placement for Casting" (Design), S.M.H. Darwish, October 1995, pp. 60-63.

"The Computer Simulation of Microstructural Evolution" (Overview), Elizabeth A. Holm and Corbett C. Battaile, September 2001, pp. 20-23.

"Controlling Remelting Processes for Superalloys and Aerospace Ti Alloys" (Overview), D.K. Melgaard, R.L. Williamson, and J.J. Beaman, March 1998, pp. 13-17.

"Crystallographic Texture Change during Grain Growth" (Research Summary), A.D. Rollett, April 2004, pp. 63-68.

"Current Processes for the Cold-Wall Melting of Titanium" (Overview), J.W. Sears, March 1990, pp. 17-21.

"Degassing Aluminum Using Static Fine-Pore Refractory Diffusers" (Innovations in Aluminum, Part II), D.A. Larsen, August 1997, pp. 27, 28, 67.

"Dendrite Fragmentation and the Effects of Fluid Flow in Castings" (Overview), A. Hellawell, S. Liu, and S.Z. Lu, March 1997, pp. 18-20.

"Dendrite Growth Directions and Morphology in the Directional Solidification of Anisotropic Materials" (Overview), A. Pocheau, J. Deschamps, and M. Georgelin, July 2007, pp. 71-76.

"Designing Furnaces for the Primary Aluminum Industry" (Design), C. Schmitz, February 1996, pp. 18-20, 22, 23.

"Developing Basic High-Performance Products for Furnaces in the Nonferrous Metals Industries" (Overview), G. Buchebner, T. Molinari, and D. Rumpf, February 2000, pp. 68-72.

"Developments in Determining the Anisotropy of Solid-Liquid Interfacial Free Energy" (Overview), J.R. Morris and R.E. Napolitano, April 2004, pp. 40-44.

"Developments in Electron-Beam and Laser Processing" (Conference Review), R. Bakish, June 1992, pp. 37-39.

"Drawn Arc Aluminum Stud Welding for Automotive Applications" (Research Summary), S. Ramasamy, August 2002, pp. 44-46.

"The Effect of Contiguity on Growth Kinetics in Liquid-Phase Sintering" (Research Summary), S.-C. Yang, S.S. Mani and R.M. German, April 1990, pp. 16-19.

"The Effect of Solution Heat Treatment on a Single-Crystal Ni-Based Superalloy" (Research Summary), B.C. Wilson, J.A. Hickman, and G.E. Fuchs, March 2003, pp. 35-40.

"The Effects of Additives to SnAgCu Alloys on Microstructure and Drop Impact Reliability of Solder Joints" (Research Summary), W. Liu and N.-C. Lee, July 2007, pp. 26-31.

"The Effects of Convection During Solidification Processing" (Commentary), S. Viswanathan, March 1997, p. 12.

"The Effects of Fumed Silica and Barite on the Aluminum Resistance of Alumina Castables" (Research Summary), S. Afshar, C. Gaubert, and C. Allaire, November 2003, pp. 66-69.

"Effects of Grain-Shape Anisotropy and Texture on Balanced-Biaxial Creep of Ti and Zr Alloys" (Research Summary), J.C. Earthman, K.L. Murty, B.V. Tanikella, and J.C. Britt, October 1994, pp. 48-54.

"Effects of Oxygen on the Solidification Microstructure of LaNi₅" (Research Summary), T.W. Ellis, L.L. Jones, and T.E. Bloomer, February 1995, pp. 47-49.

"The Effects of Purge Gases on the Hydrogen Content and Mechanical Properties of Spray-Degassed Al`" (Research Summary), R. Wu, M. Zhang, D. Shu, J. Wang, and B. Sun, May 2007, pp. 62-64.

"The Effects of Solidification and Atomization on Rare-Earth Alloys" (Overview), I.E. Anderson, M.G. Osborne, and T.W. Ellis, March 1996, pp. 38-42.

"Electromagnetic Enhancement of Melt Spinning and Strip Casting" (JOM-e: Overview), J.S.-J. Chen, K. Zhang, M.N.O. Sadiku, and A.A. Tseng, February 1998.

"The Electron Beam Evaporation and Deposition Process" (Overview), L. Bianchi, May 1991, pp. 45-47.

"Eutectic Solidification and its Role in Casting Porosity Formation" (Overview), L. Lu, K. Nogita, S.D. McDonald, and A.K. Dahlel, November 2004, pp. 52-58.

"Evaluating Ceramic-Foam and Bonded-Particle Cartridge Filtration Systems" (Research Summary), N.J. Keegan, W. Schneider, H.P. Krug, J. Moritz, M. Stoltz, and V. Dopp, August 1996, pp. 28-30.

"The Evolution of Diffusion Barriers in Copper Metallization" (Research Summary), C. Lee and Y.-L. Kuo, January 2007, pp. 44-49.

"The Extrusion Freeforming of Functional Ceramic Prototypes" (Overview), R. Vaidyanathan, J. Walish, J.L. Lombardi, S. Kasichainula, P. Calvert, and K.C. Cooper, December 2000, pp. 34-37.

"Faceted Solidification Morphologies in Low-Growth-Rate Al-Si Eutectics" (Research Summary), R.E. Napolitano, H. Meco, and C. Jung, April 2004, pp. 16-21.

"Finite-Element Thermal Modeling of Casting Microstructures and Defects" (Overview), K.O. Yu, J.J. Nichols, and M. Robinson, June 1992, pp. 21-25.

"A First-Principles Approach to Modeling Alloy Phase Equilibria" (Oveview), M. Asta, V. Ozolins, and C. Woodward, September 2001, pp. 16-19.

"Flow Visualization for Semi-Solid Processing" (Overview), H.V. Atkinson and P.J. Ward, June 2006, pp. 24-30.

"A Freckle Criterion for the Solidification of Superalloys with a Tilted Solidification Front" (Research Summary), W.-H. Yang, J.J. deBarbadillo, K. Morita, T. Suzuki, W. Chen, and K.-M. Chen, September 2004, pp. 56-61.

"From Atoms to Dendrites" (Overview), J.J. Hoyt, A. Karma, M. Asta, and D.Y. Sun, April 2004, pp. 49-54.

"Grain Boundary Misorientation Effects on Creep and Cracking in Ni-Based Alloys" (Research Summary), G.S. Was, V. Thaveeprungsriporn, and D.C. Crawford, February 1998, pp. 44-49.

"Grain Growth Stagnation by Inclusions or Pores" (Tutorial), C.H. Wörner and P.M. Hazzledine, September 1992, pp. 16-20.

"Grain Refinement in Aluminum Alloys by Means of Electromagnetic Vibrations Including Cavitation Phenomena" (JOM-e: Overview), C. Vivés, February 1998.

"The Grain Refinement of 6063 Aluminum Using Al-5Ti-1B and Al-3Ti-0.15C Grain Refiners" (Research Summary), P. Moldovan and G. Popescu, November 2004, pp. 59-61.

"Gravitational Effects on Compact Shaping and Microstructure during Liquid-Phase Sintering" (Research Summary), A. Upadhyaya, R.G. Iacocca, and R.M. German, April 1999, pp. 37-40.

"The Heredity of Al-Si-Mg-Mn Before and After Remelting" (Research Summary), L. Xiangfa, B. Xiufang, Q. Xiaogang, and M. Jiaji, November 1997, pp. 40, 41.

"A High-Capacity Melt Furnace for Reduced Energy Consumption and Enhanced Performance" (Overview), M. Fu, K. Staples, and V. Sarvepalli, May 1998, pp. 42-44.

"The High-Quality Precision Casting of Titanium Alloys" (Research Summary), K. Suzuki, September 1998, pp. 20-23, 34.

"Incorporating Crystallographic Texture in Deformation Process Simulations" (Overview), P.R. Dawson and A.J. Beaudoin, Jr., September 1997, pp. 34-41, 83.

"Incorporating Interfacial Phenomena in Solidification Models" (Overview), C. Beckermann and C.Y. Wang, January 1994, pp. 42-47.

"Improving Materials Properties and Performance through Grain Boundary Engineering" (Commentary), W.E. Reitz, February 1998, p. 39.

"Inclusions in Molten Magnesium and Potential Assessment Techniques" (Overview), H. Hu and A. Luo, October 1996, pp. 47-51.

"Industrial Applications of Solidification Technology" (Commentary), S. Viswanathan, March 1996, p. 19.

"The Influence of the Crystallographic Texture of the Biaxial Stretchability of AA 5182 Sheet" (Research Summary), B. Ren, J.G. Morris, and A.J. Beaudoin, June 1996, pp. 22-25.

"The Influence of Electromagnetic Stirring on Al-Ti-B Master Alloys" (Research Summary), L. Xiangfa, Z. Zuogui, G. Zhen, and B. Xiufang, May 2000, pp. 47-48.

"An Integrated Procedure for Modeling Investment Castings" (Overview), J.S. Tu, R.K. Foran, A.M. Hines, and P.R. Aimone, October 1995, pp. 64-68.

"Investigating Solidification with the Laser-Engineered Net Shaping (LENSTM) Process" (JOM-e: Overview), W. Hofmeister, M. Wert, J. Smugeresky, J.A. Philliber, M. Griffith, and M. Ensz, July 1999.

"Investment Casting of NiAl Single-Crystal Alloys" (Overview), K.O. Yu, J.A. Oti, and W.S. Walston, May 1993, pp. 49-51.

"The Kennecott Utah Copper Refinery Modernization" (Overview), K.E. Sutliff, T.I. Probert, and C.T. Unger (Part I) and J.E. Hoffmann, K.E. Sutliff, B.A. Wells, and D.B. George (Part II), August 1996, pp. 42-44.

"A Knowledge-Based Computer Tool for Casting Process Design" (Design), N.K. Nanda, K.A. Smith, K.F. Haberle, and V.R. Voller, September 1994, pp. 27-30.

"The Laser-Induced Combustion Synthesis of Iron-Oxide Nanocomposite Coatings on Aluminum" Research Summary S. Nayak and N.B. Dahotre, September 2002, pp. 39-41.

"Laser Research at Penn State's ARL," Sidebar to "Mechanical Issues in Laser and Abrasive Water Jet Cutting" (Research Summary), J. Singh and P. Denney, January 1995, p. 30.

"The Lost-Foam Casting of Aluminum Alloy Components" (Overview), S. Shivkumar, L. Wang and D. Apelian, November 1990, pp. 38-44.

"The Lost-Wax Casting of Icons, Bells, and Other Items in South India" Feature, R.M. Pillai, S.G.K. Pillai, and A.D. Damodaran, October 2002, pp. 12-16.

"The Macroscale Simulation of Remelting Processes" (Research Summary), L.A. Bertram, P.R. Schunk, S.N. Kempka, F. Spadafora, and R. Minisandram, March 1998, pp. 18-21.

"Macrosegregation in Directionally Solidified Dendritic Alloys" (Research Summary), R.N. Grugel and L.N. Brush, March 1997, pp. 26-30.

"Magnesium Castings for Automotive Applications" (Overview), A. Luo, J. Renaud, I. Nakatsugawa, and J. Plourde, July 1995, pp. 28-31.

"Magnesium Production by Plasma-Powered Processing" (1990 Review of Extractive Metallurgy), A.M. Cameron, D.L. Canham and V.G. Aurich, April 1990, pp. 46-48.

"Magnesium Technology 2002, Part II: Wrought Products, Alloy Processing, R&D Strategies, Corrosion, Welding" (Conference Review), D.L. Albright, F. Bergeron, R. Neelameggham, A. Luo, H. Kaplan, and M.O. Pekguleryuz, August 2002, pp. 22-24.

"The Manufacturing Significance of Solidification Modeling" (Overview), T. Overfelt, June 1992, pp. 17-20.

"Mapping Failure by Microstructure-Property Modeling" (Overview), M.F. Horstemeyer, September 2001, pp. 24-27.

"Materials Concepts Using Mathcad Part I: Euler Angle Rotations and Stereographic Projection" (Forum Features), K.J. Bowman, March 1995, pp. 66-68.

"Materials Concepts Using Mathcad Part II: Homogeneous Nucleation" (Forum Features), K.J. Bowman, April 1995, p. 78.

"Materials Concepts Using Mathcad Part III: Mohr's Circle and Principal Stresses" (Forum Features), K.J. Bowman, June 1995, pp. 60, 61.

"Materials Concepts Using Mathcad Part IV: Arbitrary Rotations of Second Rank Tensors" (Forum Features), K.J. Bowman, July 1995, pp. 58, 59.

"Materials Concepts Using Mathcad Part V: Rotations of Elastic Constants" (Forum Features), K.J. Bowman, September 1995, pp. 66, 67.

"Materials Processing with High Direct-Current Magnetic Fields" (Overview), P. Gillon, May 1995, pp. 34-37.

"Measurements of Experimentally Grown 3-D Xenon Multiplets and Comparative Phase-Field Simulations" (Research Summary), H.M. Singer, I. Singer, and J.H. Bilgram, July 2007, pp. 77-80, 82.

"The Mechanical Properties of Nanostructured Materials" (Overview), Yulin Lu and Peter K. Liaw, March 2001, pp. 31-35.

"Mechanism and Preventive Measures for Die Soldering during Al Casting in a Ferrous Mold" (Research Summary), Sumanth Shankar and Diran Apelian, August 2002, pp. 47-54.

"Melting and Casting Processes for High-Temperature Intermetallics" (Overview), S. Sen and D.M. Stefanescu, May 1991, pp. 30-34.

"Melting, Casting, and Forging Problems in Titanium Alloys" (Overview), A. Mitchell, June 1997, pp. 40-42, 69.

"Melting Standardized Aluminum Scrap: A Mass Balance Model for Europe" (Overview), U.M.J. Boin and M. Bertram, August 2005, pp. 26-33.

"Metal Solid Freeform Fabrication Using Semi-Solid Slurries" (Overview), C.S. Rice, P.F. Mendez, and S.B. Brown, December 2000, pp. 31-33.

"Metallurgical Techniques for More Reliable Integrated Circuits" (Overview), S.H. Kang, J.W. Morris, Jr., and A.S. Oates, March 1999, pp. 16-18.

"The Microstructural Characterization of Semi-Solid Slurries" (Overview), S. Nafisi and R. Ghomashchi, June 2006, pp. 24-30.

"Microstructure and Creep Behavior in AE42 Magnesium Die-Casting Alloy" (Research Summary), Bob R. Powell, Vadim Rezhets, Michael P. Balogh, and Richard A. Waldo, August 2002, pp. 34-38.

"Microstructure Modeling and Prediction during Thermomechanical Processing" (Conference Review), A.J. Beaudoin, R. Srinivasan, and S.L. Semiatin, January 2002, pp. 25-29.

"Microtexture Determination and Its Application to Materials Science" (Applied Technology), H. Weiland, September 1994, pp. 37-41.

"The Mineralogy of Copper Electrorefining" (Overview), T.T. Chen and J.E. Dutrizac, August 1990, pp. 39-44.

"Modeling of Cast Systems Using Smoothed-Particle Hydrodynamics" (Overview), P. Cleary, M. Prakash, H. Ha, M. Sinnott, T. Nguyen, and J. Grandfield, March 2004, pp. 67-70.

"Modeling Characteristics for Solidification in Single-Crystal, Investment-Cast Superalloys" (Research Summary), A.L. Purvis, C.R. Hanslits, and R.S. Diehm, January 1994, pp. 38-41.

"Modeling the Recrystallization Textures of Aluminum Alloys after Hot Deformation" (Overview), O. Engler and H.E. Vatne, June 1998, pp. 23-27.

"Modeling Segregation and Grain Structure Development in Equiaxed Solidification with Convection" (Overview), C. Beckermann, March 1997, pp. 13-17.

"The Mold Filling and Solidification of a Complex Foundry Casting" (Overview), S.G.R. Brown, J.A. Spittle, and J.D. James, January 2002.

"Molten Metal Processing of Advanced Cast Aluminum Alloys" (Overview), S. Shivkumar, L. Wang, and D. Apelian, January 1991, pp. 26-32.

"Monitoring the Solidification of Single-Crystal Castings Using High-Energy X-Ray Diffraction" (JOM-e: Research Summary), D.W. Fitting, W.P. Dubé, and T.A. Siewert, July 1999.

"Monte Carlo Simulation of Grain Growth and Recrystallization in Polycrystalline Materials" (Overview), S. Ling and M.P. Anderson, September 1992, pp. 30-36.

"The Multiphysics Modeling of Solidification and Melting Processes" (Overview), M. Cross, C. Bailey, K. Pericleous, A. Williams, V. Borjarevics, N. Croft, and G. Taylor, January 2002.

"Nano- and Microscale Mechanical Characterization Using Instrumented Indentation" (Overview), S. Rajagopalan and R. Vaidyanathan, September 2002, pp. 45-48, 60.

"Nanocrystalline SnO Gas Sensors in View of Surface Reactions and Modifications" (Research Summary), S. Seal and S. Shukla, September 2002, pp. 35-38, 60.

"Nanolayer Coatings for Hard Disk and Demanding Tribological Applications" (Research Summary), K.W. Lee, D.-J. Li, and Y.-W. Chung, September 2002, pp. 49-52.

"Nanostructured Ceramic and Hybrid Materials via Electrodeposition" (Overview), I. Zhitomirsky, A. Petric, and M. Niewczas, September 2002, pp. 31-34.

"Nanostructured Coatings for Machining and Wear-Resistant Applications" (Overview), A.P. Malshe, W. Jiang, and A.R. Dhamdhere, September 2002, pp. 28-30.

"Nanostructured Materials and the Role of Surface Engineering" (Commentary), S. Seal and N.B. Dahotre, September 2002, pp. 20-21.

"New Insights into the Morphological Stability of Eutectic and Peritectic Coupled Growth" (Research Summary), A. Karma and M. Plapp, April 2004, pp. 28-32.

"A New Paradigm: The Investment Casting Cooperative Arrangement" (Overview), B.A. Mueller and P. Monaghan, September 1994, pp. 17-20.

"A New, Third-Generation, Single-Crystal, Casting Superalloy" (Overview), G.L. Erickson, April 1995, pp. 36-39.

"Novel Image Analysis to Determine the Si Modification for Hypoeutectic and Hypereutectic Al-Si Alloys" (Research Summary), F.C. Robles Hernández and J.H. Sokolowski, November 2005, pp. 48-52.

"The Numerical Simulation of Casting Solidification in Automotive Applications" (Conference Review), C. Kim, January 1992, p. 11.

"The Numerical Simulation of Continuous and Investment Casting" (Overview), Philippe Thevoz, Matthias Gaumann, and Marco Gremaud, January 2002.

"Numerically Modeling Oxide Entrainment in the Filling of Castings: The Effect of the Webber Number" (Research Summary), R. Cuesta, A. Delgado, A. Maroto, and D. Mozo, November 2006, pp. 62-65.

"The Observation of Coalescence and Hot-Tear Formation in Organic Alloys" (Overview), P.-D. Grasso, M.-M. Drezet, and M. Rappaz, January 2002.

"Observations of Nucleation Catalysis Effects during Solidification of SnAgCuX Solder Joints" (Research Summary), I.E. Anderson, J. Walleser, and J.L. Harringa, July 2007, pp. 38-43.

"Observing and Measuring Solidification Phenomena at High Temperatures" (JOM-e: Overview), C. Orrling, Y. Fang, N. Phinichka, S. Sridhar, and A.W. Cramb, July 1999.

"The On-Line Texture Analysis of Steel Strips" (Applied Technology), H. Richter and H.W. Tamler, October 1994, pp. 46, 47.

"An On-Line Ultrasonic Cleanliness Analyzer for Molten Light Metals" (Research Summary), Y. Ono, J.-F. Moisan, Y. Zhang, C.-K. Jen, and C.-Y. Su, February 2004, pp. 59-64.

"Optimizing the Corrosion Fatigue Properties of Co-Cr-Mo Hip Joints" (Research Summary), H.M. Tensi, H. Hooputra, W. Weinfurtner, and H. Mayr, January 1995, pp. 25-27.

"Paths of Progress in Liquid Metal Processing" (1995 Review of Extraction & Processing), A. McLean, H. Soda, and I.D. Sommerville, April 1995, pp. 67-72.

"A Perspective on Aluminum Metal Treatment" (Overview), C.E. Eckert, August 2000.

"Phase-Field Models for Eutectic Solidification" (Overview), D. Lewis, T. Pusztai, L. Gránásy, J. Warren, and W. Boettinger, April 2004, pp. 34-39.

"The Potential Engineering of Grain Boundaries through Thermomechanical Processing" (Research Summary), A.J. Schwartz and W.E. King, February 1998, pp. 50-55.

"Practical Applications in Texture Analysis" (Commentary), D.B. Knorr and H. Weiland, September 1994, p. 31.

"The Predictive Control of Furnace Tapblock Operation Using CFD and PCA Modeling" (Overview), T. Plikas, L. Gunnewiek, T. Gerritsen, M. Brothers, and A. Karges, October 2005, pp. 37-43.

"Pressure-Infiltration Processing of Reinforced Aluminum" (Tutorial), A. Mortensen, V.J. Michaud, and M.C. Flemings, January 1993, pp. 36-43.

"Processing Commercial Aluminum Alloys for High Strain-Rate Superplascity" (Overview), Rajiv S. Mishra, March 2001, pp. 23-26.

"Processing Nanostructured Materials: An Overview" (Overview), L.L. Shaw, December 2000, pp. 41-45.

"Producing High-Grade Nickel Sulfate with Solvent Displacement Crystallization" (Applied Technology), Georgiana A. Moldoveanu and Geroge P. Demopoulos, January 2002, pp. 49-53.

"Producing Net-Shape Products by Powder Metallurgy" (Commentary), K.P. Cooper, July 1999, p. 25.

"Producing Thin Strips by Twin-Roll Casting—Part I: Process Aspects and Quality Issues" (Overview), B.Q. Li, May 1995, pp. 29-33.

"Producing Thin Strips by Twin-Roll Casting—Part II: Process Modeling and Development" (Overview), B.Q. Li, August 1995, pp. 13-17.

"Producing Ti-6Al-4V Plate from Single-Melt EBCHM Ingot" (Overview), J.R. Wood, February 2002, pp. 56-58.

"The Production of High-Purity Aluminum in Japan" (Overview), M. Kondo, H. Maeda and M. Mizuguchi, November 1990, pp. 36, 37.

"Progress in Equal-Channel Angular Processing" (Overview), G.M. Stoica and P.K. Liaw, March 2001, pp. 36-40.

"Progress in Understanding Grain Growth and Its Importance" (Commentary), L. Martinez, September 1992, p. 15.

"The Properties and Uses of Fluxes in Molten Aluminum Processing" (Overview), T.A. Utigard, K. Friesen, R.R. Roy, J. Lim, A. Silny, and C. Dupuis, November 1998, pp. 38-43.

"Prototype Analysis of Gravity-Modulated Welding by Inverting Weld Cross Sections" (Research Summary), K.P. Cooper, S.G. Lambrakos, and H.N. Jones III, June 2003, pp. 21-26.

"Recent Developments in the Progress of Superalloy 718" (Overview), E.A. Loria, June 1992, pp. 33-36.

"Reducing Defects in Remelting Processes for High-Performance Alloys" (Overview), J.A. Van Den Avyle, J.A. Brooks, and A.C. Powell, March 1998, pp. 22-25, 49.

"Refined Approaches to the Use of the Coincidence Site Lattice" (Research Summary), V. Randle, February 1998, pp. 56-59.

"Replicating a Most Famous Casting: The Liberty Bell" (Metallurgraphics: Special Edition), T.M. Beazley, June 1997, pp. 13, 14.

"The Rheological Properties of Solidifying Aluminum Foundry Alloys" (Overview), A.K. Dahle and L. Arnberg, March, 34-37.

"The Role of Solidification in Products and Processes" (Commentary), S. Viswanathan, February 1995, p. 37.

"The Role of Visualization in Process Simulation" (Overview), S. Atmakuri, G. Upadhya, C.M. Wang, U. Chandra, and A.J. Paul, October 1993, pp. 21-24.

"Safety-Related Problems in the Titanium Industry in the Last 50 Years" (Featured Overview), E. Poulsen, May 2000, pp. 13-17.

"The Segregation of Elements in High-Refractory-Content Single-Crystal Nickel-Based Superalloys" (Research Summary), E.C. Caldwell. F.J. Fela, and G.E. Fuchs, September 2004, pp. 44-48.

"Simulating Convective Die Heating for Forgings and Pressure Casting" (Research Summary), Biswajit Basu, Santhanuy Jana, G.S. Reddy, and J.A. Sekhar, August 2002, pp. 39-43.

"Simulating Convection and Macrosegregation in Superalloys" (Research Summary), S.D. Felicelli, D.R. Poirier, A.F. Giamei, and J.C. Heinrich, March 1997, pp. 21-25.

"Simulating the Deformation and Recrystallization of Aluminum Bicrystals" (Research Summary), B. Radhakrishnan and G. Sarma, April 2004, pp. 55-62.

"Software for Teaching Materials Processing and Diffusion" (JOM-e: Overview), S.E. Mohney, A.J. Miller, and G.L. Gray, December 2003.

"Solid-Liquid Reactions: The Effect of Cu Content on Sn-Ag-Cu Interconnects" (Research Summary), H.Y. Lu, H. Balkan and K.Y.S. Ng, June 2005, pp. 30-35.

"Solidification Defects Revisited and Semi-Solid Processing" (Commentary), D. Lewis, June 2006, p. 12.

"Solidification Issues in Welding Research and Practice" (Commentary), K.P. Cooper, June 2003, p. 13.

"Solidification and Liquidation Cracking Issues in Welding" (Overview), Sindo Kou, June 2003, pp. 37-40.

"The Solidification of Metal-Matrix Particulate Composites" (Overview), P. Rohatgi and R. Asthana, May 1991, pp. 35-41. (Note: A correction appears in July 1991, p. 58.)

"Solidification Modeling: Status and Outlook" (Overview) J.A. Dantzig, December 2000, pp. 18-21.

"Solidification Process Modeling: Status and Barriers" (Overview), A.F. Giamei, January 1993, pp. 51-53.

"Solidification Processing of Materials in Magnetic Fields" (JOM-e: Overview), B.Q. Li, February 1998.

"The Solidification Processing of Metal-Matrix Composites: The Rohatgi Symposium" (Conference Review), N. Gupta and K.G. Satyanarayana, November 2006, pp. 92-94.

"Solidification Shrinkage Defects in Electronic Solders" (Overview), G.S. Wable, S. Chada, B. Neal, and R.A. Fournelle, June 2005, pp. 38-42.

"Solidification Studies of Automotive Heat Exchanger Materials" (Overview), T. Carlberg, M. Jaradeh, and H. Kamgou Kamga, November 2006, pp. 56-61.

"Specialty Metals Processing Consortium: The Perspective of Industrial Members" (Overview), March 1998, pp. 26-29, 50.

"The Spray Forming of Nanostructured Aluminum Oxide" (Research Summary), A. Agarwal, T. McKechnie, and S. Seal, September 2002, pp. 42-44.

"The State of the Art in Electron Beam Melting and Refining" (Conference Review), R. Bakish, May 1991, pp. 42-44.

"The Stochastic Modeling of Solidification Structures in Alloy 718 Remelt Ingots" (Research Summary), L. Nastac, S. Sundarraj, K-O. Yu, and Y. Pang, March 1998, pp. 30-35.

"The Structure and Properties of Nanocrystalline Materials: Issues and Concerns" (Overview), C. Suryanarayana, September 2002, pp. 24-27.

"Submicron Particle Chemistry: Vapor Condensation Analogous to Liquid Solidification"(Overview), Neil T. Jenkins and Thomas W. Eagar, June 2003, pp. 44-47.

"The Substance of a Technology: Electron-Beam Melting and Refining" (Industrial Insight), R. Bakish, November 1998, pp. 28-30.

"The Theory and Inhibition of Abnormal Grain Growth in Steels" (Overview), T. Gladman, September 1992, pp. 21-24.

"The Thermodynamic Prediction of Phase Stability in Multicomponent Superalloys" (Applied Technology), J.-C. Zhao and Michael F. Henry, January 2002, pp. 37-41.

"The Thermokinetic Modeling of Substrate Rapid Solidification" (Research Summary), X. Zhang and A. Atrens, January 1994, pp. 48-50.

"Thermal Recalescence and Mushy Zone Coarsening in Undercooled Melts" (Research Summary), L.M. Colucci-Mizenko, M.E. Glicksman, and R.N. Smith, January 1994, pp. 51-55.

"Thermomechanical Processing Effects on C-Mn-Si TRIP Steels" (Retained Austenite in Steel), S. Yue, A. DiChiro, and A. Zarei-Hanzaki, September 1997, pp. 59-61.

"The Thermophysical Properties of Molten Materials" (Conference Review), T. Overfelt and T. Glasgow, September 1993, pp. 13-15.

"Transient Fluid Flow in a Continuous Steel-Slab Casting Mold" (Overview), B.G. Thomas, Q. Yuan, S. Sivaramakrishnan, and S.P. Vanka, January 2002.

"The Three-Dimensional Simulation of Flow Pattern in Equal-Channel Angular Extrusion" (JOM-e: Overview), H.J. Cui, R.E. Goforth, and K.T. Hartwig, August 1998.

"Titanium Investment Casting Defects: A Metallographic Overview" (Overview), J.D. Cotton, L.P. Clark, and H.R. Phelps, June 2006, pp. 13-16.

"The USAMP Magnesium Powertrain Cast Components Project" (Overview), B.R. Powell, November 2003, pp. 28-29.

"The Use of Electromagnetic Casting for Al Alloys and Other Metals" (Overview), J.W. Evans, May 1995, pp. 38-41.

"The Use of Friction-Stir Technology to Modify the Surfaces of AM60B Magnesium Die Castings" (Research Summary), M. Santella, A. Frederick, C. Degen, and T.-Y. Pan, May 2006, pp. 56-61.

"Using Chemical Sensors to Control Molten Metal Processing" (Overview), J.W. Fergus, October 2000.

"Using Cold-Crucible Melting for Titanium Precision Castings" (Overview), G. Broihanne and J. Bannister, May 2000, pp. 21-23.

"Using Fractal Analysis to Describe Irregular Microstructures" (Overview), S.-Z. Lu and A. Hellawell, December 1995, pp. 14-17.

"Using Microtherm Microporous Insulation in Smelter Applications" (Overview), I. Mackenzie, February 2000, p. 73.

"Using OIM to Investigate the Microstructural Evolution of Ti-6Al-4V" (Applied Technology), T.R. Bieler, M.G. Glavicic, and S.L. Semiatin, January 2002, pp. 31-36.

"Using the Phase-Field Crystal Method in the Multi-Scale Modeling of Microstructure Evolution" (Overview), N. Provatas, J.A. Dantzig, B. Athreya, P. Chan, P. Stefanovic, N. Goldenfeld, and K.R. Elder, July 2007, pp. 83-90.

"Using Solidification Parameters to Predict Porosity Distributions in Alloy Castings" (Overview), S. Viswanathan, V.K. Sikka, and H.D. Brody, September 1992, pp. 37-40.

"Using Visualization to Interpret Solidification Simulations" (Overview), A.F. Giamei and D.E. Edwards, October 1993, pp. 25, 26, 28.

"Vacuum-Die Casting Titanium for Aerospace and Commercial Components" (Overview), D. Larsen and G. Colvin, June 1999, pp. 26–27.

"Virtual Aluminum Castings: An Industrial Application of ICME" (Overview), J. Allison, M. Li, C. Wolverton, and X.-M. Su, November 2006, pp. 28-35.

"Visualization and Animation in Manufacturing and Materials" (Featured Overview), J.C. Johnston and D.A. Thompson, October 1993, pp. 14-19.

"Visualizing Convection and Solidification in Metallic Alloys" (Applied Technology), J.N. Koster, March 1997, pp. 31-35.

"Weld Analysis Using an Inverse-Problem Approach Based on Quasi-One-Dimensional Interpolation" (Research Summary), S.G. Lambrakos, J.O.Milewski, and P.G. Moore, June 2003, pp. 27-36.

"Welding: Solidification and Microstructure" (Overview), S.A. David, S.S. Babu, and J.M. Vitek, June 2003, pp. 13-20.